Incorporating elastic and creep deformations in modelling the three-dimensional autogenous shrinkage of cement paste

A structure-based modelling framework was established to simulate the three-dimensional autogenous shrinkage of cement paste. A cement hydration model, HYMOSTRUC3D-E, was used to obtain the microstructures and ionic concentrations of the cement paste. A lattice fracture model based on the effective stress and effective modulus was used to...

Numerical simulation of the initial particle parking structure of cement/geopolymer paste and the dissolution of amorphous silica using real-shape particles

Many particle-based numerical models have been used to simulate the hydration process of cementitious materials. Most of those models employ regular shape particles, like the commonly used spheres, to represent cement, slag, or fly ash, which neglects the influence of particle shape. To deal with this issue, this study extended the Anm material...

Numerical Modelling of the Effect of Filler/Matrix Interfacial Strength on the Fracture of Cementitious Composites

The interface between filler and hydration products can have a significant effect on the mechanical properties of the cement paste system. With different adhesion properties between filler and hydration products, the effect of microstructural features (size, shape, surface roughness), particle distribution and area fraction of filler on the...

Thermal Management on IGBT Power Electronic Devices and Modules

As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...

Numerical thermal analysis and optimization of multi-chip LED module using response surface methodology and genetic algorithm

In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...

A novel lifetime prediction for integrated LED lamps by electronic-thermal simulation

In this paper, an integrated LED lamp with an electrolytic capacitor-free driver is considered to study the coupling effects of both LED and driver's degradations on lamp's lifetime. An electrolytic capacitor-less buck-boost driver is used. The physics of failure (PoF) based electronic thermal simulation is carried out to simulate the lamp's...

Modeling framework for fracture in multiscale cement-based material structures

Multiscale modeling for cement-based materials, such as concrete, is a relatively young subject, but there are already a number of different approaches to study different aspects of these classical materials. In this paper, the parameter-passing multiscale modeling scheme is established and applied to address the multiscale modeling problem...

Development of engineered cementitious composites with limestone powder and blast furnace slag

Nowadays limestone powder and blast furnace slag (BFS) are widely used in concrete as blended materials in cement. The replacement of Portland cement by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production of these two materials needs less energy and causes less CO2 emission than Portland cement...