A 2.6-to-4.1GHz Fractional-N Digital PLL Based on a Time-Mode Arithmetic Unit Achieving -249.4dB FoM and -59dBc Fractional Spurs

In a fractional-N PLL, it is beneficial to minimize the input range of its phase detector (PD) as it promotes better linearity and higher PD gain for suppressing noise contributions of the following loop components. This can be done by canceling the predicted instantaneous time offset between the frequency reference (FREF) and the variable...

Strength formation mechanism and performance of steel slag self-compacting epoxy resin concrete

A self-compacting steel slag epoxy resin concrete (SERC) was designed with steel slag as aggregate and epoxy resin as binder for rapid repair of road expansion joints and pavement. At the same time, a group of self-compacting basalt epoxy resin concrete (BERC) with basalt as coarse aggregate and limestone as fine aggregate was set up as the...

Research on Design and Performance of Self-Compacting Cement Emulsified Bitumen Mixture (CEBM)

To meet the needs of the road industry for maintenance operations, a new cement emulsified bitumen mixture (CEBM) with early-strength, self-compacting, and room-temperature construction characteristics was designed. The strength formation mechanism of CEBM was revealed with a scanning electron microscope (SEM) and the surface free energy (SFE...

Cerebron: A Reconfigurable Architecture for Spatio-Temporal Sparse Spiking Neural Networks

Spiking neural networks (SNNs) are promising alternatives to artificial neural networks (ANNs) since they are more realistic brain-inspired computing models. SNNs have sparse neuron firing over time, i.e., spatiotemporal sparsity; thus, they are helpful in enabling energy-efficient hardware inference. However, exploiting the spatiotemporal...

Aqueous chemoenzymatic one-pot enantioselective synthesis of tertiary α-aryl cycloketonesviaPd-catalyzed C-C formation and enzymatic C=C asymmetric hydrogenation

An aqueous chemoenzymatic cascade reaction combining Pd-catalyzed C-C formation and enzymatic C=C asymmetric hydrogenation (AH) was developed for enantioselective synthesis of tertiary α-aryl cycloketones in good yields and excellent enantioselectivities. The stereopreference of the enzyme in AH of α-aryl cyclohexenones was studied. An...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Effect of coarse aggregate size on non-uniform stress/strain and drying-induced microcracking in concrete

Non-uniform stresses, strains and microcracking of the concretes with three coarse aggregate sizes (5–10 mm, 10–16 mm, 16–20 mm) dried under 40% relative humidity (RH) for 60 days were quantified using digital image correlation and lattice fracture modelling. The influencing mechanism of coarse aggregate size on the drying-induced...

Carrier-Based Modulated Model Predictive Control for Vienna Rectifiers

The implementation of traditional finite-control-set model predictive control (FCS-MPC) with variable switching frequency in voltage source rectifiers (VSRs) can make the system suffer from poor current harmonics performance. In fact, the resulting wide-spread voltage harmonic generated at the AC terminals makes the design of the typical multi...

Model Predictive Control for the Reduction of DC-link Current Ripple in Two-level Three-phase Voltage Source Inverters

In the applications of three-phase two-level voltage source inverters (VSIs) relatively large energy storage capacitors are used to absorb the high DC-link current ripples mainly caused by the circulating reactive power, the switched AC phase current flowing to the DC-link, and other dynamic and/or asymmetric operating conditions. Especially for...

Pyrophosphate Phosphor Solid Solution with High Quantum Efficiency and Thermal Stability for Efficient LED Lighting

Phosphors with high quantum efficiency and thermal stability are greatly desired for lighting industries. Based on the design strategy of solid solution, a series of deep-blue-emitting phosphors (Sr_0.99-xBa_x)₂P₂O₇:0.02Eu²⁺ (SB_xPE x = 0–0.5) are developed. Upon...

Robust Signal Control of Exit Lanes for Left-Turn Intersections with the Consideration of Traffic Fluctuation

Traffic throughput at intersections can be improved by using exit lanes for left-turning (EFL), tidal flow lanes near an intersection, which has been recently introduced. This paper considers the operational robustness of the EFL intersection in relation to the control scheme applied to the traffic light setting. For safety and efficiency, it...

Microwave roasting of blast furnace slag for carbon dioxide mineralization and energy analysis

For both the waste treatment of large quantities of blast furnace (BF) slag and carbon dioxide (CO₂) that are discharged in ironworks, mineral carbonation by BF slag was proposed in this decade. However, it has not been widely used due to its high energy consumption and low production efficiency. In this study, a microwave roasting...

Investigation of drying-induced non-uniform deformation, stress, and micro-crack propagation in concrete

Concrete generally deforms and cracks in a non-uniform manner under drying-induced stress. This study used the lattice fracture model to simulate the drying-induced non-uniform deformations, stresses, and micro-crack propagation in concrete. Experiments were designed to validate the lattice fracture model, wherein the drying-induced non...

Effect of relative humidity on drying-induced damage in concrete: A comparative study of digital image correlation and lattice modelling

To assess the effect of relative humidity (RH) on drying-induced damage in concrete, the non-uniform strains and microcracks in concrete under different RH conditions were obtained using the digital image correlation (DIC) technique and lattice fracture model. The simulated non-uniform displacements were consistent with those captured using...

Building classification of VHR airborne stereo images using fully convolutional networks and free training samples

Semantic segmentation, especially for buildings, from the very high resolution (VHR) airborne images is an important task in urban mapping applications. Nowadays, the deep learning has significantly improved and applied in computer vision applications. Fully Convolutional Networks (FCN) is one of the tops voted method due to their good...

Luminescence of Ce3+ at two different sites in ?-Sr2P2O7 under vacuum ultraviolet-UV and x-ray excitation

A series of Ce3+ doped ?-Sr2?2xCexNaxP2O7 phosphor compounds has been prepared using a high-temperature solid-state reaction technique. The luminescence properties under vacuum ultraviolet-UV and x-ray excitation were studied. Luminescence spectra reveal three UV-emitting peaks at about 310, 330, and 350 nm from which we conclude that Ce3+...