Interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper presents an experimental study on the interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash (AASF) pastes. Three interface bonding properties (i.e., the chemical bonding energy Gd, the initial frictional bond strength τ0, and slip-hardening behavior) were determined using single-fiber pullout...

Copper Nanoparticle Sintering Enabled Hermetic Packaging With Fine Sealing Ring for MEMS Application

Driving by the increased demand for hermetic packaging in the more than Moore (MtM) roadmap, a Cu nanoparticle sintering-enabled hermetic sealing solution was developed with a small-size sealing ring. The developed technology simplifies microfabrication and requires less surface roughness using a sinterable Cu nanoparticle paste. A 50μm size...

Micromechanics-guided development of strain-hardening alkali-activated composites: Towards a low-carbon built environment

Alkali-activated Materials (AAMs), including those classified as geopolymer, are obtained through the reaction between a solid precursor and an alkaline solution. Compared with ordinary Portland cement (OPC) binders, these materials maintain comparable mechanical properties but have the advantage of reducing greenhouse gas emissions and...

Failure modes of bonded wrapped composite joints for steel circular hollow sections in ultimate load experiments

The concept of an innovative bonded joining technology where welding is not required is presented as an alternative to traditional welded connection for steel circular hollow section (CHS). Wrapped composite joints have potential to greatly improve fatigue endurance when applied in multi-membered truss structures, e.g. offshore jackets for...

Bonding between silicones and thermoplastics using 3D printed mechanical interlocking

Silicones have desirable properties such as skin-safety, high temperature-resistance, and flexibility. Many applications require the presence of a hard body connected to the silicone. Traditionally, it has been difficult to create strong bonding between silicones and hard materials. In this study, a technique is presented to control the...

On the fracture behaviour of CFRP bonded joints under mode I loading: Effect of supporting carrier and interface contamination

This paper addresses the fracture behaviour of bonded composite plates featuring a kissing bond along the crack growth path. Double cantilever beam (DCB) experiments are carried out under a displacement controlled loading condition to acquire the load response. The experimental data are collected and analysed analytically for specimens with...

Performance of shcc with bacteria for concrete patch repair

The overall performance of concrete patch repair systems depends on the durability of and compatibility between the concrete substrate and the repair material. This paper investigates the performance of a new type of SHCC material with embedded bacteria as a repair material. The bacteria are a healing agent to enhance the durability of the...