- document
-
Sun, Renjuan (author), Lu, Wei (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Hu, Xinlei (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)The resistance of cracked ECC against chloride ingress is mainly governed by the accumulated crack width of all the cracks rather than the maximum width of multiple cracks. However, most studies focus on the influence of a single fine crackjournal article 2022
- document
-
Sun, Yubo (author), Zhang, Shizhe (author), Rahul, A. V. (author), Tao, Yaxin (author), Van Bockstaele, Filip (author), Dewettinck, Koen (author), Ye, G. (author), De Schutter, Geert (author)This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryogenic scanning electron microscopy (cryo-SEM) revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical...journal article 2022
- document
-
Chi, Lin (author), Li, Wenda (author), Li, Z. (author), Wang, Zheng (author), Lu, Shuang (author), Liu, Qi (author)Alternative current impedance spectroscopy (ACIS) is a promising non-destructive testing method to monitor long-term change and assess the durability of concrete. This study investigates the influences of Ethylene Diamine Tetraacetic Acid (EDTA) on the hydration of hardening cement by ACIS. It is found that EDTA retards the early-age...journal article 2022
- document
-
Yin, Kangting (author), Jiang, Yaqing (author), He, Hui (author), Ren, Jie (author), Li, Z. (author)In this paper, fresh (setting and rheology) and hardened properties (strength and shrinkage) of one-part alkali-activated slag (AAS) with and without rice straw ash (RSA) are comprehensively investigated. The reaction kinetics and microstructure of the mixtures are characterized by a series of experimental techniques. The results reveal that...journal article 2022
- document
-
Irshad, Muneeb (author), Rafique, Muhammad (author), Tabish, Asif Nadeem (author), Ghaffar, Abdul (author), Shakeel, A. (author), Siraj, Khurram (author), Ain, Qurat ul (author), Raza, Rizwan (author), Assiri, Mohammed Ali (author), Imran, Muhammad (author)In this study, nickel oxide–Y2O3-doped ZrO2 (NiO-YSZ) composite powder as an anode material was synthesized using a cost-effective combustion method for high-temperature solid oxide fuel cell (SOFC). Further, the effects of sintering temperatures (1200, 1300, and 1400 °C) were studied for its properties in relation to the SOFC performance. The...journal article 2022
- document
-
Bakhit, Babak (author), Dorri, Samira (author), Kosari, A. (author), Mol, J.M.C. (author), Petrov, Ivan (author), Birch, Jens (author), Hultman, Lars (author), Greczynski, Grzegorz (author)We study microstructure, mechanical, and corrosion properties of Zr<sub>1-x</sub>Cr<sub>x</sub>B<sub>y</sub> coatings deposited by hybrid high-power impulse/DC magnetron co-sputtering (CrB<sub>2</sub>-HiPIMS/ZrB<sub>2</sub>-DCMS). Cr/(Zr + Cr) ratio, x, increases from 0.13 to 0.9, while B/(Zr + Cr) ratio, y, decreases from 2.92 to 1.81. As...journal article 2022
- document
-
Wang, Yawen (author), Hou, Longgang (author), Su, Hui (author), Tian, Qingkun (author), Yu, Kangcai (author), Eskin, Dmitry (author), Katgerman, L. (author), Zhuang, Linzhong (author)The alloy design and homogenization processes are intimately associated with the microstructure, phase composition and performance for Al-Zn-Mg-Cu alloys. The microstructures and phase composition of a series of Al-Zn-Mg-Cu alloys before and after the homogenization treatments were investigated along with thermodynamic calculation to...journal article 2022
- document
- Yilmaz, A. (author) doctoral thesis 2021
- document
-
Hajizad, O. (author)In this PhD thesis, we investigated possible steel candidates for use in railway crossings in order to reduce the damage in them. Pearlitic R350HT together with Bainitic grades including CrB, B1400 and carbide free B360 were investigated for their mechanical properties such as ultimate strength, yield strength, ductility and hardness. The...doctoral thesis 2021
- document
-
Zhang, Shizhe (author), Li, Z. (author), Ghiassi, B. (author), Yin, Suhong (author), Ye, G. (author)This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-...journal article 2021
- document
-
Verma, N. (author), Delhez, R. (author), van der Pers, N.M. (author), Tichelaar, F.D. (author), Bottger, A.J. (author)In this work, we studied the mechanical and thermal stability of ~100 nm Pd thin films magnetron sputter deposited on a bare oxidized Si(100) wafer, a sputtered Titanium (Ti) intermediate layer, and a spin-coated Polyimide (PI) intermediate layer. The dependence of the film stability on the film morphology and the film-substrate interaction...journal article 2021
- document
-
Yalçinkaya, Ç. (author), Copuroglu, Oguzhan (author)Ultra-high performance concrete (UHPC) is an innovative cement-based composite with high mechanical performance under tensile and compressive loads, extremely low permeability, and excellent durability. Because of these features, UHPC has the potential to contribute to the development of new architectural perspectives and structural systems...journal article 2021
- document
-
Yalçinkaya, Ç. (author), Copuroglu, Oguzhan (author)Ultra-high performance concrete (UHPC), which typically contains extremely high superplasticizer amount, tends to render a special type of dense surface layer, especially under drying conditions. Even if the inner side of fresh UHPC is still in a flowable nature, the top surface of the concrete which is exposed to ambient conditions renders a...journal article 2021
- document
-
Lescur, A. (author), Stergar, E. (author), Lim, J. (author), Hertelé, S. (author), Petrov, R.H. (author)MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is an accelerator driven system, currently under development at SCK CEN in Mol, Belgium. This nuclear system will use liquid Lead-Bismuth eutectic alloy as a spallation target for fast neutron production and as coolant. The ideal structural material for a liquid metal...journal article 2021
- document
-
Rong, Jian (author), Zhu, Jia-Ning (author), Xiao, Wenlong (author), Zhao, Xinqing (author), Ma, Chaoli (author)Thermal conductivity is a key parameter for high performance material needed for electronic devices. While most commercially used Mg foundry alloys exhibit low thermal conductivities. In this work, we developed an Mg–3RE–0.5Zn alloy that is suitable for high pressure die cast (HPDC) ultrathin wall cellphone components. The thermal...journal article 2021
- document
-
Jiang, Quanxin (author), Morete Barbosa Bertolo, V. (author), Popovich, V. (author), Sietsma, J. (author), Walters, C.L. (author)Macroscale cleavage fracture toughness of high strength steels is strongly related to the fracture of hard microstructural inclusions. Therefore, an accurate determination of the local stress on these inclusions based on the matrix stress is necessary for the statistical modelling of macroscale cleavage fracture. This paper presents...journal article 2021
- document
-
Gomarasca, S. (author), Peeters, D.M.J. (author), Atli-Veltin, B. (author), Dransfeld, C.A. (author)Understanding the three-dimensional variability of unidirectional composites is relevant to the material performance and the development of advanced material modelling strategies. This work proposes a new methodology for the characterization of unidirectional composites, showcased on carbon fibre/poly(ether-ether-ketone) tapes. Three...journal article 2021
- document
-
Fu, J. (author), Davis, T. P. (author), Kumar, A. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)Oxide dispersion strengthened (ODS) steels are leading candidates for structural materials in nuclear fission and fusion power plants. Understanding the nature of nano-oxide particles in ODS steels is vital for a better control of the microstructure and mechanical properties to further their applications. In this study, electron microscopy...journal article 2021
- document
-
Lubelli, B. (author), Nijland, Timo G. (author), van Hees, R.P.J. (author)Compatibility of repair materials in conservation is a widely desired goal, but difficult to achieve. In this research, the compatibility of four commercial stone repair mortars, commonly used in conservation practice in the Netherlands and neighbouring countries, is discussed. In order to do so, they have been characterized in laboratory....journal article 2021
- document
-
Eivani, A.R. (author), Mehdizade, M. (author), Chabok, S. (author), Zhou, J. (author)Magnesium alloys have many unique properties, mostly benefitting from the low density of magnesium. However, they are not competitive, when compared with other lightweight materials, such as aluminum alloys, particularly in ductility and corrosion resistance. There is a strong need to improve the mechanical properties and corrosion resistance...journal article 2021