- document
-
Perruchoud, V.P. (author), Alderliesten, R.C. (author), Mosleh, Yasmine (author)Biobased fibre-reinforced polymer (FRP) composites, consisting of natural lignocellulosic fibres such as flax or hemp, are great alternatives to synthetic fibres to mitigate the environmental impact of high-performance composites in engineering structures. Natural fibres such as flax have damping and specific mechanical properties suitable to...journal article 2024
- document
-
Yao, Liaojun (author), Wang, Jiexiong (author), He, Yonglyu (author), Zhao, Xiuhui (author), Chen, Xiangming (author), Liu, J. (author), Guo, Licheng (author), Alderliesten, R.C. (author)Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...journal article 2024
- document
-
Yao, L. (author), Chuai, Mingyue (author), Li, Hanyue (author), Chen, Xiangming (author), Quan, D. (author), Alderliesten, R.C. (author), Beyens, M. (author)Temperature can significantly affect fatigue delamination growth (FDG) behavior in composites, while fiber bridging has been frequently reported during FDG. The focus of this study was therefore on investigating temperature effects on FDG behavior with fiber bridging. Mode I fatigue delamination experiments were conducted on a thermoset...journal article 2024
- document
-
Tu, W. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author)In this study, a novel experimental approach was devised to investigate shear dominant and combined opening-shear planar delamination behaviours in composite laminates subjected to quasi-static out-of-plane loading. The patterns of planar delamination growth were depicted through different inspection techniques, including digital image...journal article 2024
- document
-
Anand, S. (author), Alderliesten, R.C. (author), Castro, Saullo G.P. (author)To design crash structures for disruptive aircraft designs, it is required to have fast and accurate methods that can predict crashworthiness of aircraft structures early in the design phase. Axial crushing is one of the key energy absorbing mechanisms during a crash event. In this study, various analytical models proposed for calculation of...journal article 2024
- document
-
Yao, Liaojun (author), Chuai, Mingyue (author), Lyu, Zhangming (author), Chen, Xiangming (author), Guo, Licheng (author), Alderliesten, R.C. (author)Methods based on fracture mechanics have been widely used in fatigue delamination growth (FDG) characterization of composite laminates. These methods are based on the similitude hypothesis. It is therefore important to have appropriate parameters to well represent the similitude, which is useful for fatigue delamination test standard...journal article 2024
- document
-
Ji, C. (author), Hu, Jiqiang (author), Alderliesten, R.C. (author), Yang, Jinchuan (author), Zhou, Zhengong (author), Sun, Yuguo (author), Wang, Bing (author)This paper aims to illustrate the effect of the impact damage on fatigue behavior of CF/PEEK-titanium hybrid laminates. To achieve this end, a fatigue life model was proposed to predict the S–N curves of the laminates at various initial impact energy levels and stress ratios based on the energy dissipation approach. The energy dissipation...journal article 2024
- document
-
Teuwen, Julie J.E. (author), Farooq, U. (author), Alderliesten, R.C. (author), Dransfeld, C.A. (author)Toughness of epoxies is commonly improved by adding thermoplastic phases, which is achieved through dissolution and phase separation at the microscale. However, little is known about the synergistic effects of toughening phases on multiple scales. Therefore, here, we study the toughening of epoxies with layered poly(ether imide) (PEI) structures...journal article 2023
- document
-
Brunner, A.E. (author), Alderliesten, R.C. (author), Pascoe, J.A. (author)Quasi-static or cyclic loading of an artificial starter crack in unidirectionally fibre-reinforced composite test coupons yields fracture mechanics data—the toughness or strain-energy release rate (labelled G)—for characterising delamination initiation and propagation. Thus far, the reproducibility of these tests is typically between 10 and...journal article 2023
- document
-
Quan, D. (author), Wang, Guilong (author), Zhao, Guoqun (author), Alderliesten, R.C. (author)The exceptional mechanical properties of Polyether-ether-ketone(PEEK) polymers make them ideal candidates for interlayer toughening of carbon fibre/epoxy composites. Herein, ultra-thin PEEK films with a thickness of 8μm, 18μm and 25μm were used for interlayer toughening of an aerospace-grade carbon fibre/epoxy composite. The mode-I and mode...journal article 2023
- document
-
Quan, D. (author), Ma, Yannan (author), Yue, Dongsheng (author), Liu, Jiaming (author), Xing, Jun (author), Zhang, Mingming (author), Alderliesten, R.C. (author), Zhao, Guoqun (author)In this study, an aerospace thermosetting composite was co-curing joined by Polyether-ether-ketone (PEEK) and Polyethylenimine (PEI) films, with an aim of developing advanced composite joints. The semi-crystalline PEEK films were surface activated upon a UV-irradiation technique to obtain a strong film–composite interface, while the amorphous...journal article 2023
- document
-
Ferreira Motta, Roberto (author), Alderliesten, R.C. (author), Zarouchas, D. (author), Yutaka Shiino, Marcos (author), Odila Hilario Cioffi, Maria (author), Jacobus Cornelis Voorwald, Herman (author)After half a century of developing fatigue delamination prediction models, where accuracy seems more important than physical understanding, this research aims to merge both aspects. To that aim, strain energy release (SER) within the fatigue load cycle was studied using acoustic emission. The correlation between the measured strain energy...journal article 2023
- document
-
Grewal, M. (author), Wiersma, Jan (author), Westerveld, Henrike (author), Bosman, P.A.N. (author), Alderliesten, T. (author)Purpose: Deformable image registration (DIR) can benefit from additional guidance using corresponding landmarks in the images. However, the benefits thereof are largely understudied, especially due to the lack of automatic landmark detection methods for three-dimensional (3D) medical images. Approach: We present a deep convolutional neural...journal article 2023
- document
-
Yao, Liaojun (author), Chuai, Mingyue (author), Liu, J. (author), Guo, Licheng (author), Chen, Xiangming (author), Alderliesten, R.C. (author), Beyens, M. (author)This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue...journal article 2023
- document
-
Huo, L. (author), Verstraeten, A.J.M. (author), Alderliesten, R.C. (author)Full impact damage tolerance assessment requires the ability to properly mimic the repeated impact response and damage behaviour of composite materials using quasi-static approximations. To this aim, this paper reports an experimental investigation evaluating two quasi-static methods for mimicking repeated impact response and damage behaviour...journal article 2023
- document
-
De Paula Santos, L.F. (author), Monticeli, F.M. (author), Ribeiro, Bruno (author), Costa, Michelle Leali (author), Alderliesten, R.C. (author), Botelho, Edson Cocchieri (author)Carbon fiber reinforced polymer (CFRP) composites are widely used to produce structural components. However, their low interlaminar strength makes them susceptible to delamination, limiting structural applications. Aiming to solve this problem, this work proposes adding carbon nanotubes buckypaper (BP) into CFR thermoplastic composites as an...journal article 2023
- document
-
Sadighi, M. (author), Alderliesten, R.C. (author), Fathi, Azadeh (author), Soltannia, Babak (author), Hedayati, R. (author)Damages to aircraft fuselages by ice impactors are categorized as barely visible impact damage (BVID). As the application of composite laminates in manufacturing aircraft fuselage is increasing rapidly, studying hail impact on composite laminates seems crucial. Investigation of variation of delamination area and link-up area for different...journal article 2023
- document
-
Qian-Qian, Li (author), Mosleh, Yasmine (author), Alderliesten, R.C. (author), Hong-Hua, Zhang (author), Wei, Li (author)To comply with the trend in the development of engineering materials towards lightweight, high strength, eco-friendly, sustainable, and multi-functional, a three-dimensional braided integrated composite honeycomb is designed. The effects of geometrical parameters particularly joint wall lengths on the in-plane mechanical behavior of the...journal article 2023
- document
-
Biagini, D. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author)In previous literature, a plateau phase in fatigue growth of impact delamination projected area in CFRP was found. Explaining this plateau phase still represents a knowledge gap. In the present work, echo-pulse and through thickness transmission ultrasonic scan inspections were combined with acoustic emission monitoring to explain this...journal article 2023
- document
-
Yao, Liaojun (author), Liu, J. (author), Lyu, Zhangming (author), Alderliesten, R.C. (author), Hao, Cui (author), Ren, Chuanxi (author), Guo, Licheng (author)Carbon-fibre reinforced composites are susceptible to delamination. Fibre bridging is an important shielding mechanism frequently observed in delamination. The presence of these bridging fibres can significantly increase interlaminar resistance, making it critical to represent this phenomenon for delamination characterization in composite...journal article 2023