Synchrophasor-based Applications to Enhance Electrical System Performance in the Netherlands

This paper deals with the essentials of synchrophasor applications for future power systems aimed at increasing system reliability and resilience. In this work, several applications are presented, covering real-time disturbance detection and blackout prevention. Firstly, an advanced big-data management platform built in real-time digital...

Non-Homogeneous Sampling Rate Wide Area Backup Protection using Synchrophasors and IED Data

Fault currents may result in cascading failures and even system collapse if not detected and cleared on time. To account for the possibility of failure of primary protection under stressed system conditions, an extra layer of protection is commonly employed, referred to as backup protection. This paper introduces an effective formulation for...

PMU-voltage drop based fault locator for transmission backup protection

Local protection elements such as fuses and relays are the first protective mechanism to clear the fault and isolate the affected part of the power grid. Although the selectivity, speed, and sensitivity of these primary protection devices are relatively high, they cannot be considered flawless. There is a small percentage of events for which...

Real-time simulation Model of Ultracapacitors for Frequency Stability Support from Wind Generation

The frequency stability of the power system is challenged by the high penetration of power electronic interfaced renewable energy sources (RES). Energy storage systems (ESS) are used to supply extra power injection to enhance the frequency stability during a disturbance. This paper presents a novel approach for improving the frequency dynamics...

Modeling and Optimal Tuning of Hybrid ESS Supporting Fast Active Power Regulation of Fully Decoupled Wind Power Generators

The frequency stability of the power system is challenged by the high penetration of power electronic interfaced renewable energy sources (RES). This paper investigates the improvements of the frequency response of fully decoupled wind power generators (FDWG) by proposing a novel generic model implementation of ultracapacitors (UC) within a...

Dynamic Frequency Support for Low Inertia Power Systems by Renewable Energy Hubs with Fast Active Power Regulation

This paper concerns the feasibility of Fast Active Power Regulation (FAPR) in renewable energy hubs. Selected state-of-the-art FAPR strategies are applied to various controllable devices within a hub, such as a solar photovoltaic (PV) farm and an electrolyzer acting as a responsive load. Among the selected strategies are droop-based FAPR, droop...

Power Hardware-in-the-Loop-Based Performance Analysis of Different Converter Controllers for Fast Active Power Regulation in Low-Inertia Power Systems

Future electrical power systems will be dominated by power electronic converters, which are deployed for the integration of renewable power plants, responsive demand, and different types of storage systems. The stability of such systems will strongly depend on the control strategies attached to the converters. In this context, laboratory-scale...

A Power Hardware-in-the-Loop Based Method for FAPR Compliance Testing of the Wind Turbine Converters Control

A task for new power generation technologies, interfaced to the electrical grid by power electronic converters, is to stiffen the rate of change of frequency (RoCoF) at the initial few milliseconds (ms) after any variation of active power balance. This task is defined in this article as fast active power regulation (FAPR), a generic definition...

Analysis and tuning methodology of FAPI controllers for maximising the share of grid-connected wind generations

In this study, a novel methodology is proposed for sensitivity-based tuning and analysis of derivative-based fast active power injection (FAPI) controllers in type-4 wind turbine units integrated into a low-inertia power system. The FAPI controller is attached to a power electronic interfaced generation (PEIG) represented by a generic model of...

Fast Active Power-Frequency Support Methods by Large Scale Electrolyzers for Multi-Energy Systems

This paper presents a comparative assessment of fast active power regulation (FAPR) control strategies implemented on megawatt-scale controllable electrolysers, with the goal of achieving enhanced frequency support during large active power imbalances that lead to major under-frequency deviations. The FAPR control strategies consist of three...

Implementation and Performance Assessment of Fast Active Power Injection Method for Type 4 Wind Turbine based on Real-time Simulation

This paper deals with the implementation of a Fast Active Power Injection (FAPI) controller in a Type-4 Wind Turbine. Two different FAPI controllers, droop-based and a modified derivative-based controller are proposed and investigated under real-time simulation platform. The implementation is done in a Real-Time Digital Simulator (RTDS) by...