Searched for: collection%253Air
(41 - 60 of 338)

Pages

document
Zhang, Shizhe (author), He, S. (author), Ghiassi, Bahman (author), van Breugel, K. (author), Ye, G. (author)
This paper presents an experimental study on the interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash (AASF) pastes. Three interface bonding properties (i.e., the chemical bonding energy Gd, the initial frictional bond strength τ0, and slip-hardening behavior) were determined using single-fiber pullout...
journal article 2023
document
Ma, Yuwei (author), Gong, Jihao (author), Ye, G. (author), Fu, Jiyang (author)
The high autogenous shrinkage of alkali-activated fly ash/slag (AASF) poses a significant concern for the widespread application of AASF in structural engineering. The present study compares the efficacy of activator and mineral admixtures in mitigating the autogenous shrinkage of AASF, and discusses the underlying mechanism. The results show...
journal article 2023
document
Ye, Ziliang (author), van Schie, M.S. (author), Pool, Lisa (author), Heida, Annejet (author), Knops, Paul (author), Taverne, Yannick J.H.J. (author), Brundel, Bianca J.J.M. (author), de Groot, N.M.S. (author)
Aims: Areas of conduction inhomogeneity (CI) during sinus rhythm may facilitate the initiation and perpetuation of atrial fibrillation (AF). Currently, no tool is available to quantify the severity of CI. Our aim is to develop and validate a novel tool using unipolar electrograms (EGMs) only to quantify the severity of CI in the atria....
journal article 2023
document
Qiu, Xiujiao (author), Chang, Z. (author), Chen, J. (author), Schlangen, E. (author), Ye, G. (author), Schutter, Geert De (author)
In our former paper, based on a published 3D reactive transport model at microscale with the capability of simulating the chemical reactions involved in ASR, the location of expansive ASR gel related to the reactivity of aggregate, temperature, aggregate porosity and silica content in aggregate, is clarified. Based on the simulation results,...
journal article 2023
document
Zuo, Yibing (author), Liao, Yishun (author), Ye, G. (author)
Thermodynamic parameters of chloride and sulfate intercalated hydrotalcites were deduced. The phase evolutions in alkali‑activated slag cement upon only sodium chloride or only magnesium sulfate attack and combined attack of those two salts were investigated via thermodynamic modelling. Friedel's salt was predicted to form under sodium...
journal article 2023
document
Yang, Z. (author), Ye, Qin (author), Stoter, J.E. (author), Nan, L. (author)
Continuous implicit representations can flexibly describe complex 3D geometry and offer excellent potential for 3D point cloud analysis. However, it remains challenging for existing point-based deep learning architectures to leverage the implicit representations due to the discrepancy in data structures between implicit fields and point...
journal article 2023
document
SUN, Beibei (author), DING, Luchuan (author), Ye, G. (author), De SCHUTTER, Geert (author)
In this paper, 871 data were collected from literature and trained by the 4 representative machine learning methods, in order to build a robust compressive strength predictive model for slag and fly ash based alkali activated concretes. The optimum models of each machine learning method were verified by 4 validation metrics and further...
journal article 2023
document
Yu, G. (author), Ye, P. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The pursuit of battery charging technology for electric vehicle (EV) has led to extensive research on the inductive-based wireless power transfer (WPT) systems. In this paper, the compensation component (including coils) stresses will be studied in two commonly adopted compensation topologies, namely S-S and LCC-S compensations. Due to the peak...
conference paper 2023
document
Sun, Yubo (author), Cheng, H. (author), Zhang, Shizhe (author), Mohan, Manu K. (author), Ye, G. (author), De Schutter, Geert (author)
Alkali-activated concrete (AAC) is regarded as a promising alternative construction material to reduce the CO<sub>2</sub> emission induced by Portland cement (PC) concrete. Due to the diversity in raw materials and complexity of reaction mechanisms, a commonly applied design code is still absent to date. This study attempts to directly...
journal article 2023
document
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)
Although the application of blast furnace slag and fly ash-based alkali-activated concrete (BFS/FA-AAC) has both economic and environmental benefits, it is limited by the lack of a straightforward mix design method. In this paper, an experiment was conducted to investigate the effect of control factors, including the Na<sub>2</sub>O/binder...
journal article 2023
document
Sun, Yubo (author), Ghorbani, Saeid (author), Ye, G. (author), De Schutter, Geert (author)
Alkali-activated material (AAM) is developed as a green alternative binder to replace Portland cement (PC) in the construction field. However, the large-scale application with AAM concrete is limited so far, with the insufficient knowledge of rheological behavior being a major obstruct. Thixotropy of concrete is of great interest, which can...
book chapter 2023
document
Tong, Liang-yu (author), Xiong, Qing Xiang (author), Zhang, Zhidong (author), Chen, Xiangsheng (author), Ye, G. (author), Liu, Qing feng (author)
This paper develops a novel lattice diffusive model to quantitatively study the chloride diffusion coefficient in unsaturated cementitious materials, in which the pore voxels are redistributed to make a better representation of a real microstructure of hardened cement paste. Considering the hierarchical microstructure and different drying...
journal article 2023
document
Wang, S. (author), Yang, Huiru (author), Zong, Qihang (author), Huang, Qianming (author), Tan, C. (author), Gao, Chenshan (author), Li, Shizhen (author), Ye, H. (author), Zhang, Kouchi (author), French, P.J. (author)
In recent years, metal crack-based stretchable flexible strain sensors have attracted significant attention in wearable device applications due to their extremely high sensitivity. However, the tradeoff between sensitivity and detection range has been an intractable dilemma, severely limiting their practical applications. Herein, we propose a...
journal article 2023
document
Chen, B. (author), Perumal, Priyadharshini (author), Illikainen, Mirja (author), Ye, G. (author)
In recent years, the widespread application of waste incineration technology has led to an increased generation of municipal solid waste incineration (MSWI) bottom ash. There is growing interest in the use of MSWI bottom ash as a mineral resource to produce construction materials. The utilization potential of MSWI bottom ash is determined by...
review 2023
document
Tan, C. (author), Wang, S. (author), Yang, Huiru (author), Huang, Qianming (author), Li, Shizhen (author), Liu, X. (author), Ye, H. (author), Zhang, Kouchi (author)
Short-wave ultraviolet (also called UVC) irradiation is a well-adopted method of viral inactivation due to its ability to damage genetic material. A fundamental problem with the UVC inactivation method is that its mechanism of action on viruses is still unknown at the molecular level. To address this problem, herein we investigate the...
journal article 2023
document
Sun, Yubo (author), Liu, Zhiyuan (author), Ghorbani, Saeid (author), Ye, G. (author), De Schutter, Geert (author)
The present study explores the possibility of replacing blast furnace slag (BFS) with coal fly ash (FA) to produce alkali-activated material (AAM) concrete with hybrid precursors. With an increased FA replacement ratio, the reaction kinetics, fresh and hardened properties of AAM mixtures have been investigated. The retardation effect on the...
journal article 2022
document
Wang, Jinyang (author), Chen, P. (author), Ye, Zhisheng (author)
The rate reduction models have been widely used to model the recurrent failure data for their capabilities in quantifying the repair effects. Despite the widespread popularity, there have been limited studies on statistical inference of most failure rate reduction models. In view of this fact, this study proposes a semiparametric estimation...
journal article 2022
document
Li, Jing (author), Yin, Suhong (author), Huang, Haoliang (author), Hu, Jie (author), Yi, Chaofan (author), Chen, Zheng (author), Ma, Yuwei (author), Ye, G. (author)
This study is undertaken to explore the relationship between the reaction products and the drying shrinkage of alkali-activated slag (AAS) with the varying hydroxide dosage. AAS pastes were firstly produced with either Al(OH)3 or Mg(OH)2 to investigate the effects of hydroxide on the composition of reaction products and the drying shrinkage of...
journal article 2022
document
Tan, C. (author), Wang, S. (author), Yang, Huiru (author), Huang, Qianming (author), Li, Shizhen (author), Liu, X. (author), Ye, H. (author), Zhang, Kouchi (author)
Recent reports focus on the hydrogenation engineering of monolayer boron phosphide and simultaneously explore its promising applications in nanoelectronics. Coupling density functional theory and finite element method, we investigate the bowtie triangle ring microstructure composed of boron phosphide with hydrogenation based on structural and...
journal article 2022
document
Zhang, Y. (author), Wu, Kai (author), Yang, Zhengxian (author), Ye, G. (author)
Reliable characterization of the pore structure is essentially important for transport-related durability studies of cementitious materials. Mercury intrusion porosimetry has been commonly used for pore structure measurement while the ink-bottle effect significantly affects the trustworthiness of pore size features of cementitious materials....
journal article 2022
Searched for: collection%253Air
(41 - 60 of 338)

Pages