Bending study of submarine power cables based on a repeated unit cell model

Predicting the bending behaviours of a submarine power cable (SPC) is always a tough task due to its complex geometry and inner layer contact, not to mention the stick–slip mechanism. A full-scale finite element model is cumbersome during the early design stage and a more efficient model for practical use is required. Therefore, in this paper...

Mechanical analysis of a type of wire rope subjected to tension

Wire ropes are widely observed in many industries such as marine engineering and civil engineering, as a type of structure that can bear huge axial force. There are various kinds of wire ropes in practical engineering, corresponding to different usage scenarios. This paper focuses on 6 × 36SW + 1WR with a diameter of 16 mm. The axial...

Mechanical responses of a fiberglass flexible pipe subject to tension & internal pressure

Composite structures, such as the fiberglass reinforced structure studied in this paper, have been normally treated in previous research as homogeneous anisotropic laminated plates regarding the investigation of their mechanical properties. Throughout this paper, this specific structure is considered in a different way in which the fiberglass...

Role of ammonia-oxidizing microorganisms in the removal of organic micropollutants during simulated riverbank filtration

Biodegradation plays an important role in the removal of organic micropollutants (OMPs) during riverbank filtration (RBF) for drinking water production. The ability of ammonia-oxidizing microorganisms (AOM) to remove OMPs has attracted increasing attention. However, the distribution of AOM in RBF and its role in the degradation of OMPs...

Mechanical behavior of metallic strip flexible pipes during reeling operation

Metallic strip flexible pipes (MSFP), a relatively new style of unbonded flexible pipes, are considered as an attractive alternative to traditional submarine pipes. During its reeling operation, it will inevitably confront various complicated loads, which may affect the integrity and safety of MSFP's utilization. In this paper, the tension...

Metocean criteria for internal solitary waves obtained from numerical models

A numerical model in slice configuration was applied to the Central Andaman Sea in order to derive metocean operational and design criteria associated to internal solitary waves which are large amplitude interfacial waves. For that purpose, a 10 year hindcast was generated. The model was driven by tides at the open boundary and included...

Investigation into Atomic Diffusion at the Interface During Extrusion Welding of Magnesium and Magnesium Alloys

This research was aimed to reveal atomic diffusion across the bonding interface through the extrusion-welding experiments of dissimilar materials, namely pure magnesium and Mg–Al–Zn–RE alloy. A special tooling setup used to simulate weld seam formation during extrusion through a porthole die was designed for this model study. To deform the...

Mechanical responses of submarine power cables subject to axisymmetric loadings

Submarine power cables are considered lifelines in wind farm engineering, playing a key role in transporting electric current produced by wind turbines or wave converter. Cables inevitably confront combined loadings in deep-sea areas, affecting the integrity and safety during their installation and application. In this paper, the mechanical...

Analysis of the mechanical properties of a fibreglass reinforced flexible pipe (FGRFP)

Fibreglass reinforced flexible pipe (FGRFP) is a kind of composite thermoplastic pipe serving as a preferred application in the field of oil transportation. This paper studies the mechanical behaviour of FGRFPs under pure bending by experimental, numerical and theoretical methods. Full-scale four-point bending tests are conducted and the...

Construction of three-dimensional extrusion limit diagram for magnesium alloy using artificial neural network and its validation

Conventional extrusion limit diagram (ELD) involves only two extrusion process variables and as such it does not account for the combined effects of multiple process parameters on the extrusion process with respect to pressure requirement and extrudate temperature. Attempts were made in the present research to construct three-dimensional (3D)...

Integrated physical and numerical simulations of weld seam formation during extrusion of magnesium alloy

Solid-state bonding takes place during the extrusion process to produce a hollow metal profile through a porthole die, known as extrusion welding. Defective weld seams degrade extruded products in mechanical properties. The present research was aimed to determine the effect of extrusion condition on the longitudinal weld seam quality of a...

Investigation into the extrudability of a new Mg-Al-Zn-RE alloy with large amounts of alloying elements

The present study was aimed at determining the extrudability of a newly developed Mg-Al-Zn-RE magnesium alloy with large amounts of alloying elements. The experimental and numerical investigation clearly showed that the extrudate temperature was a crucial factor in deciding if a critical temperature between 754 K and 768 K (481 °C and 495 °C)...

Analysis of the bonding strength and microstructure of AA6082 extrusion weld seams formed during physical simulation

The research was aimed to determine the effects of extrusion process condition on the weld seam quality of the aluminum alloy AA6082 by using a novel physical simulation method. A weld seam between two bars was formed under hydrostatic pressure in a specially designed die setup to simulate the longitudinal weld seam formation during extrusion...