- document
- De Willigen, P. (author) book 1999
- document
-
Zjajo, Amir (author), van Leuken, T.G.R.M. (author)In this paper, we propose an efficient methodology based on a real-time estimator and predictor-corrector scheme for accurate thermal expansion profile and aging evaluation of a neuromorphic signal processor circuit components. As the experimental results indicate, for comparable mesh size, the proposed method is 1~2 order of magnitude more...conference paper 2016
- document
-
Song, X. (author), Polinder, H. (author), Liu, D. (author), Mijatovic, Nenad (author), Holbøll, Joachim (author), Jensen, Bogi Bech (author)Direct drive high temperature superconducting (HTS) wind turbine generators have been proposed to tackle challenges for ever increasing wind turbine ratings. Due to smaller reactances in HTS generators, higher fault currents and larger transient torques could occur if sudden short circuits happen at generator terminals. In this paper, a finite...conference paper 2016
- document
-
Cui, Z. (author), Chen, Xianping (author), Fan, Xuejun (author), Zhang, Kouchi (author)Interfacial properties of Cu/SiO2 in semiconductor devices has continued to be the subject of challenging study for many years because of its difficulties in experimentally quantifying the critical strength of interface. In this paper, a multi-scale modeling approach is built to characterize the interfacial properties between Cu and SiO2. In...conference paper 2018
- document
-
Sarnaghi, Ani Khaloian (author), van de Kuilen, J.W.G. (author)Structural heterogeneities in wood are changing the complexity of the numerical modelling of this material. Knots are the main strength governing parameters, which are changing the uniformity of the stress distributions through the boards. These weak locations may result in failure in the material. Comprehensive reconstruction of the boards,...conference paper 2018
- document
-
Hu, D. (author), Wang, Chieh (author), Li, Z. (author), Gupta, N. (author), Poelma, René H. (author), Shi, Ziliang (author), Fan, J. (author), Zhang, Kouchi (author)Driven by the increasing demand for high-power systems, ceramic substrates have received more attention for handling higher power density. Warpage in active metal brazed (AMB) ceramic substrate becomes a critical issue as it can deteriorate the reliability performance. This study comprises three phases, including investigation of the cause of...conference paper 2024
- document
-
Li, Shizhen (author), Liu, X. (author), Gao, Chenshan (author), Wang, S. (author), Li, Jun (author), Ye, Huaiyu (author), Zhang, Kouchi (author), Wu, Shaohui (author)The significance of wafer bonding is fundamental to the progression of electronic systems. Common fabrication techniques for Cu pillars play a crucial role in establishing resilient and efficient interconnects within semiconductor devices. It is imperative to explore the potential of nano-copper as an alternative material to overcome limitations...conference paper 2024
- document
-
Lee, W. (author), Kim, Jin-Gyun (author), Molenbroek, J.F.M. (author), Goossens, R.H.M. (author), You, Heecheon (author)A 3D head and face scan data can be usefully applied in the ergonomic design of a wearable product such as an oxygen mask or a virtual reality (VR) headset to support the safety as well as comfort for a certain amount of a target population. This study is aimed to develop analysis and design methods of an ergonomic facial wearable products (e.g....conference paper 2020
- document
-
van de Graaf, A.V. (author)The numerical simulation of brittle failure at structural level with nonlinear finite<br/>element analysis (NLFEA) remains a challenge due to robustness issues. We attribute these problems to the dimensions of real-world structures combined with softening behavior and negative tangent stiffness at local level which may lead to non-convergence, i...doctoral thesis 2017
- document
-
Kongshaug, Simen Sørgaard (author), Larssen, Rolf Magne (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)Material modelling, from the micro to the macro level, of concrete affected by alkali–silica reaction (ASR) has been devoted a lot of research. However, the application of the material models in structural analyses of reinforced concrete (RC) structures, showing the structural implications/consequences of ASR, has got little attention in the...journal article 2021
- document
-
Truong-Hong, Linh (author), Nguyen, N. (author), Lindenbergh, R.C. (author), Fisk, P. (author), Huynh, T. (author)This paper proposes a methodology to automatically extract components of an oil storage tank from terrestrial laser scanning (TLS) point clouds, and subsequently to create a three-dimensional (3D) solid model of the tank for numerical simulation. The proposed method is integrated into a smart analysis layer of a digital twin platform...journal article 2021
- document
-
Gutierrez Alvarez, J. (author), Bisagni, C. (author)This paper presents an experimental and numerical study of composite plates, analyzing the interaction between mechanical and thermal loads related to buckling and the occurrence of mode jumping. A novel experimental setup for thermomechanical testing was developed. The setup is conceived around a frame with a low coefficient of thermal...journal article 2022
- document
-
Huo, L. (author), Kassapoglou, C. (author), Alderliesten, R.C. (author)To develop a simplified and physically sound delamination-failure criterion, this paper reports a joint experimental and numerical study in which out-of-plane quasi-static indentations with different indentation forces were applied to the centre of fully clamped rectangular carbon fibre-reinforced polymer (CFRP) laminates. The results show that...journal article 2022
- document
-
Song, X. (author), Liu, D. (author), Polinder, H. (author), Mijatovic, Nenad (author), Holbøll, Joachim (author), Jensen, Bogi Bech (author)Direct drive high temperature superconducting (HTS) wind turbine generators have been proposed to tackle challenges for ever increasing wind turbine ratings. Due to smaller reactances in HTS generators, higher fault currents and larger transient torques could occur if sudden short circuits happen at generator terminals. In this paper, a finite...journal article 2017
- document
-
Dermentzoglou, Dimitrios (author), Castellino, Myrta (author), De Girolamo, Paolo (author), Partovi, Maziar (author), Schreppers, Gerd-Jan (author), Antonini, A. (author)Several failures of recurved concrete crownwalls have been observed in recent years. This work aims to get a better insight within the processes underlying the loading phase of these structures due to non-breaking wave impulsive loading conditions and to identify the dominant failure modes. The investigation is carried out through an offline one...journal article 2021
- document
-
Cheng, Xiaoyang (author), Diambra, Andrea (author), Ibraim, Erdin (author), Liu, H. (author), Pisano, F. (author)Based on advanced 3D finite element modelling, this paper analyses the stress paths experienced by soil elements in the vicinity of a monopile foundation for offshore wind turbines subjected to cyclic loading with the aim of informing soil laboratory testing in support of monopile foundation design. It is shown that the soil elements in front of...journal article 2021
- document
-
Cheng, L. (author), Xin, H. (author), Groves, R.M. (author), Veljkovic, M. (author)Acoustic emission (AE) is often used for structural health monitoring (SHM) in the wide field of engineering structures and one of its most beneficial attributes is the ability to localize the damage/crack based on the AE events. The vast majority of ongoing work on AE monitoring focues on geometrically simple structures or a confined area,...journal article 2021
- document
-
Jeon, Jaemin (author), Kim, Jaeyong (author), Lee, Jong Jun (author), Shin, D. (author), Kim, Yoon Young (author)This study presents a new modeling technique to estimate the stiffness matrix of a thin-walled beam-joint structure using deep learning. When thin-walled beams meet at joints, significant sectional deformations occur, such as warping and distortion. These deformations should be considered in the one-dimensional beam analysis, but it is...journal article 2022
- document
-
Zhan, Shi (author), Jiang, Dajun (author), Ling, Ming (author), Ding, Jian (author), Yang, Kai (author), Duan, Lei (author), Tsai, Tsung Yuan (author), Feng, Yong (author), van Trigt, B. (author), Jia, Weitao (author), Zhang, Changqing (author), Hu, Hai (author)Femoral neck fractures (FNFs) in young patients usually result from high-energy violence, and the vertical transcervical type is typically challenging for its instability. FNFs are commonly treated with three cannulated screws (CS), but the role of screws type on fixation effects (FE) is unclear. The purpose of this study was to evaluate the...journal article 2021
- document
-
Kongshaug, Simen Sørgaard (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)Alkali–silica reaction (ASR) in concrete causes expansion and degradation of the material, which might give adverse structural consequences. From the structural engineer point view, the greatest concern is if ASR leads to loss of structural integrity. Two natural questions arise when assessing existing concrete structures affected by ASR: (1)...journal article 2022