Auto-Resonant Detection Method for Optimized ZVS Operation in IPT Systems With Wide Variation of Magnetic Coupling and Load

In wireless charging systems, the H-bridge converter's switching frequency is set close to the system's natural resonance for achieving optimized zero voltage switching (ZVS). Variations to the system's natural resonance are commonly tracked by following the changes in the resonant current's polarity, i.e., current zero-crossings. The main...

Quality factor based design guideline for optimized inductive power transfer

In high-power wireless battery charging that uses inductive power transfer, a considerable amount of power losses are located in the transmitter and receiver coils because they carry high resonant currents and typically have a loose coupling between them which increases eddy current losses. Therefore, the nominal operation needs to be chosen...

Compensation Network for a 7.7 kW Wireless Charging System that Uses Standardized Coils

Industrial wireless charging systems use standardized coils to guarantee interoperability between different manufacturers. In combination with these coils, the compensation network can still be designed and optimized. This paper explains the step-by-step design of the compensation network for a 7.7 kW wireless charging system (power class WPT2),...

Auto-resonant Control of the H-Bridge Resonant Converter for Inductive Power Transfer Applications

In inductive power transfer applications that use resonant compensation networks, the commonly employed H-bridge inverter should be kept operating in soft-switching to ensure high power efficiency and low irradiated electromagnetic noise. To achieve so, the zero-crossing detection circuit for the resonant current or voltage must be fast and...

Sustainable e-bike charging station that enables ac, dc andwireless charging from solar energy

If electric vehicles have to be truly sustainable, it is essential to charge them from sustainable sources of electricity, such as solar or wind energy. In this paper, the design of solar powered e-bike charging station that provides AC, DC and wireless charging of e-bikes is investigated. The charging station has integrated battery storage...

Advantages and Tuning of Zero Voltage Switching in a Wireless Power Transfer System

In charging applications, wireless power transfer (WPT) is mostly used in the form of inductive power transfer with magnetic resonant coupling. Therefore, both the transmitter and the receiver coils are combined with capacitors, such that only active power is transferred. To evaluate the operation of the WPT charging system, its equivalent...

Survey on Standards and Regulations for Wireless Charging of Electric Vehicles

In the next decades, the number of electric vehicles (EVs) for private use is predicted to increase considerably. Charging the EVs through wireless power transfer (WPT), i.e. wireless charging, has the potential to shorten charging duration of EVs batteries through dynamic charging and it would also improve the safety of static charging in case...

Solar Powered E-Bike Charging Station with AC, DC and Contactless Charging

Charging electric vehicles from solar energy provides a sustainable means of transportation. This paper shows the design of solar powered e-bike charging station that provides AC, DC and contactless charging of e-bikes. The DC charger allows direct DC charging of the e-bike from the DC power of the photovoltaic panels (PV) without the need for...

Rapid simulation of permanent magnet drives

Efficient integrated control for chattering phenomena of a motion control system in sliding mode

Simulation of flicker mitigation with the Smarttrafo

Modeling and simulation for wind energy