Predicting the Yield Stress of Geomaterials from Their Microstructure

The seminal work of Gurson (J Eng Mater Technol 99:2–5, 1977) on a simplified pore structure, a single spherical pore, first provided a theoretical relationship between the yield stress and the porosity. This contribution extends the approach to determine the macroscopic yield of a porous material by taking explicitly into account its...

Self-healing cementitious composites with a hollow vascular network created using 3D-printed sacrificial templates

Additively manufactured vascular networks have great potential for use in autonomous self-healing of cementitious composites as they potentially allow multiple healing events to take place. However, the existence of a vascular tube wall may impede with the healing efficiency if it does not rupture timely to release the healing agent. The...

Mechanical properties and healing efficiency of 3D-printed ABS vascular based self-healing cementitious composite: Experiments and modelling

Cracking is one of the main causes for deterioration of concrete structures. Self-healing concrete with 3D-printed vascular networks has excellent potential for autonomous self-healing. This approach is scarcely investigated: no studies have been devoted to the influence of printing parameters on the properties of vascular based self-healing...

Cementitious composites reinforced with 3D printed functionally graded polymeric lattice structures: Experiments and modelling

Cementitious materials are widely used in construction. For their low ductility, they typically need to be reinforced by steel rebars, which cause potential corrosion problems. Polymeric reinforcement, which does not have corrosion problems, has been used to replace steel rebars. However, a relatively high reinforcing ratio is usually...

3D-impaction printing of porous layers

Porous layers composed of nanoparticles (NPs) have a wide range of (potential) applications including catalysts, (chemical) sensors, thermoelectric materials and electronics. These application domains will profit strongly from our NP printing process which is flexible with respect to i) the composition of the NPs and ii) the possibility of...

Reinforced FDM: Multi-axis filament alignment with controlled anisotropic strength

The anisotropy of mechanical strength on a 3D printed model can be controlled in a multi-axis 3D printing system as materials can be accumulated along dynamically varied directions. In this paper, we present a new computational framework to generate specially designed layers and toolpaths of multi-axis 3D printing for strengthening a model by...

Deformation and fracture of 3D printed disordered lattice materials: Experiments and modeling

A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...