Influence of solder condition on effective thermal conductivity of two-directional random fibres: Pore-scale simulation

It is indicated that the solder joint of the metal fibrous materials is a critical factor impacting the heat conduction. To reveal the mechanism by which solder joint sizes, solder joint skips, solder flux materials, and filling media affect the thermal conductivity of fibres, pore-scale numerical simulation is employed to study the thermal...

Performance Comparison between Data Centers with Different Airflow Management Technologies

Air cooling systems are widely used in current data centers owing to their low capital costs and high reliability. To satisfy the increasing rack power density, the optimal air-cooling technology and an economic analysis should be carefully discussed. Therefore, this study discusses four airflow management technologies: Case 1: raised floor...

Combustion Air Humidification for NOx Emissions Reduction in Gas Boiler: An Experimental Study

NO_x emission reduction from gas boilers has become a key issue in improving air quality. Combustion air humidification technology is gradually being used to reduce NO_x emissions. However, the NO_x emission reduction effect of gas boilers at a higher combustion air humidity has been studied less. A flue gas with...

Effect of CO₂-based binary mixtures on the performance of radial-inflow turbines for the supercritical CO₂ cycles

Recently, the supercritical carbon dioxide (SCO₂) power cycle has become a hotspot in the field of energy-efficient utilization. The utilization of additives in the power cycle has been proven to be an effective way to improve the SCO₂ power cycle efficiency. As one of the core components of the system, the influence of...

Optimization of adaptive metal foam arrangement in a heat storage tank

The integration of phase change materials (PCMs) and metal foam has been widely concerned recently. To decrease non-uniformity of uniform metal foam-PCMs, adaptive metal foam arrangement strategy with increasing porosity from inside to outside has attracted widespread attention. This work conducted a symmetric simulation model of vertical...

A designed wall roughness approach to improve turbulent heat transfer to supercritical CO₂ flowing in horizontal tubes

Supercritical flow through a horizontal pipe leads to a non-uniform peripheral wall temperature distribution even when the wall heat flux is kept constant and uniform. This is attributed to lower heat transfer coefficient at the top section where the denser fluid tends to sink. Hence, to obtain a uniform wall temperature, a designed wall...

Design and assessments on a hybrid pin fin-metal foam structure towards enhancing melting heat transfer: An experimental study

Solar energy, as a kind of renewable energy, offers a large reserve to be harvested at a reasonably low cost for engineering applications. To decouple the temporal and spatial relevance of the continuous energy supply of solar energy, latent heat thermal energy storage can deal with this problem at different temperatures. Aiming to improve...

Thermo-Economic Assessment on Insulation Conditions of the Buried Heating Pipeline for District Heating

Insulation performance and buried depth of heating pipelines are the vital factors affecting the energy loss of directly buried heating pipelines. This study considers the thermo-economic assessment of insulation of directly buried heating pipelines for district heating. The optimal insulation thickness, energy-saving effect, and payback...