Pages
- 1
- 2
- document
-
Bruggeman, A.M.R.M. (author), Nikitin, M. (author), la Rocca, G. (author), Bergsma, O.K. (author)During the early design stages of airframe components, many possible design architectures and production methods need to be traded to find the best configuration. Evaluating different production methods can be challenging as different production methods put different requirements on the product to be designed. This paper presents a new...conference paper 2024
- document
-
Bruggeman, A.M.R.M. (author), Bansal, D. (author), la Rocca, G. (author), van der Laan, T (author), van den Berg, T. (author)Including production considerations in the early design stages of aircraft structures is challenging. Production information is mostly known by experts and rarely formally documented such that it can be effectively used during the design process. Producibility is mostly considered after completing the design, resulting in increased cost and...journal article 2024
- document
-
From Requirements to Product: an MBSE Approach for the Digitalization of the Aircraft Design ProcessBruggeman, A.M.R.M. (author), la Rocca, G. (author)During the aircraft conceptual design phase, many different design options need to be explored and compared in a short time frame. To speed up this process, efforts have been made in the past decades to digitalize parts of the design process, with a focus on the automation of the repetitive and non-creative tasks inherent to the iterative design...journal article 2023
- document
-
Wahler, N.F.M. (author), Varriale, Carmine (author), la Rocca, G. (author)This paper compares optimum control surface layouts designed and sized to obtain the same Flying Qualities (FQs) performance with different Control Allocation (CA) methods, and proposes novel layouts for staggered box-wing aircraft aimed at transonic commercial flight. Box-wings allow the installation of redundant control surfaces for which no...conference paper 2023
- document
-
Raju Kulkarni, A. (author), Bansal, D. (author), la Rocca, G. (author), Mendes Fernandes, F. (author), Augustinus, Robin (author), Timmer, Bram (author)This article proposes a novel approach to support Knowledge Based Engineering (KBE) application development based on Model-Based Systems Engineering (MBSE). In this methodology, the related knowledge is captured in a well-structured Systems Modeling Language (SysML) model, instead of (static) documents. The knowledge model is then automatically...conference paper 2023
- document
-
Sonneveld, J.S. (author), van den Berg, T. (author), la Rocca, G. (author), Valencia Ibáñez, S. (author), van Manen, B. (author), Bruggeman, A.M.R.M. (author), Beijer, B. (author)This paper discusses the approach for architecture design space optimization of aeronautical systems investigated in the DEFAINE project. In system architecture optimization problems, hierarchical relations between design variables may exist. This means that the quantity and type of some variables are dependent on the value of other variables....conference paper 2023
- document
-
Bruggeman, A.M.R.M. (author), van Manen, H.S. (author), van der Laan, Ton (author), van den Berg, Tobie (author), la Rocca, G. (author)According to a study performed by the Project Management Institute, around 47% of unsuccessful projects do not meet their goals and objectives due to poor requirements management. Taking requirements into account during the aircraft design process and ensuring requirement compliance during all design phases is important to obtain good and...conference paper 2022
- document
-
Raju Kulkarni, A. (author), la Rocca, G. (author), Veldhuis, L.L.M. (author), Eitelberg, G. (author)Growing interest in unconventional aircraft designs coupled with miniaturization of electronics and advancements in manufacturing techniques have revived the interest in the use of Sub-scale Flight Testing (SFT) to study the flight behaviour of full-scale aircraft in the early stages of design process by means of free-flying sub-scale models....review 2022
- document
-
Bussemaker, J.H. (author), de Smedt, T. (author), la Rocca, G. (author), Ciampa, P.D. (author), Nagel, Björn (author)View Video Presentation: https://doi-org.tudelft.idm.oclc.org/10.2514/6.2021-3078.vid<br/><br/>Decisions regarding the system architecture are important and taken early in the design process, however suffer from large design spaces and expert bias. Systematic design space exploration techniques, like optimization, can be applied to system...conference paper 2021
- document
-
van Gent, I. (author), Aigner, Benedikt (author), Beijer, Bastiaan (author), Jepsen, Jonas (author), la Rocca, G. (author)After almost three decades of evolution, it is not yet possible to apply MDO in collaborative projects within large, heterogeneous and distributed teams of experts, whilst nowadays necessary for the development of any complex product. The H2020 project AGILE took the challenge of devising a novel paradigm to swiftly set up and deploy large...journal article 2020
- document
-
Ciampa, P.D. (author), Nagel, Björn (author), la Rocca, G. (author)The research and innovation AGILE project has developed an approach, the so-called AGILE Paradigm, focusing on the acceleration of the deployment and operation of collaborative Multidisciplinary Design Analysis Optimization systems, which in turns can be exploited to accelerate the development of complex products, such as novel aerospace...conference paper 2020
- document
-
Zhu, Z. (author), la Rocca, G. (author), Zheng, Yao (author), Chen, Jianjun (author)Routing design of aircraft Electrical Wiring Interconnection System (EWIS) is time-consuming and error-prone. A solution, which automatically routes the EWIS inside the aircraft Digital MockUp (DMU), has been proposed and presented in the previous publications. The DMU, however, includes over-detailed features, which hardly influence the...journal article 2020
- document
-
Prakasha, Prajwal Shiva (author), Torrigiani, F. (author), Walther, Jan-Niclas (author), Timmermans, Huub (author), Rajpal, D. (author), van Gent, I. (author), la Rocca, G. (author), Voskuijl, M. (author)The research and innovation AGILE project developed the next generation of aircraft Multidisciplinary Design and Optimization processes, which target significant reductions in aircraft development costs and time to market, leading to more cost-effective and greener aircraft solutions. The high level objective is the...conference paper 2019
- document
-
van Gent, I. (author), la Rocca, G. (author)This paper proposes a novel methodology and its software implementation, called KADMOS (Knowledge- and graph-based Agile Design for Multidisciplinary Optimization System), to increase the agility of design teams in collaborative Multidisciplinary Design Analysis and Optimization (MDAO). Agility here refers to the ease and flexibility to...journal article 2019
- document
-
Raju Kulkarni, A. (author), la Rocca, G. (author), Veldhuis, L.L.M. (author)Sub-scaled Physical Models (SPM) are often employed in wind-tunnel tests or in free-flight tests (physical tests) to predict flight behavior of aircraft Full-scale Design (FD). However, a quality prediction of both the static and dynamic behavior is to date an open challenge. In this research, a methodology for designing SPMs is proposed for...conference paper 2019
- document
-
Raju Kulkarni, A. (author), Varriale, Carmine (author), Voskuijl, M. (author), la Rocca, G. (author), Veldhuis, L.L.M. (author)Sub-scale Flight Testing (SFT) is potentially useful in predicting aircraft flight behaviour, especially in the case of unconventional designs for which legacy information is unavailable and wind tunnel tests are unable to predict aircraft dynamics. A necessary condition for SFT is the design of properly scaled models. However, even in case of...conference paper 2019
- document
-
Aigner, Benedikt (author), van Gent, I. (author), la Rocca, G. (author), Stumpf, Eike (author), Veldhuis, L.L.M. (author)A new system is presented that enables the visualization of large multidisciplinary design optimization (MDO) problems and their solution strategy. It was developed within the scope of the European project AGILE. In AGILE, collaborative MDO is performed in large, heterogeneous teams of experts by solving MDO problems using a collection of...journal article 2018
- document
-
van Gent, I. (author), la Rocca, G. (author), Hoogreef, M.F.M. (author)This paper proposes a new format to store and exchange multidisciplinary design optimization (MDO) systems. Here, the generic term MDO system refers to the set of disciplinary tools, their exchanged data and process connections that, all together, define an MDO computational setup. In the process leading to the formal specification of such a...journal article 2018
- document
-
van Gent, I. (author), Aigner, Benedikt (author), Beijer, Bastiaan (author), la Rocca, G. (author)This paper presents a critical discussion on the automated problem formulation and workflow creation approach developed within the European project AGILE to support and accelerate the setup of aircraft MDO workflows in a large, heterogeneous team of experts. The developed framework is based on a methodological approach, called the AGILE...conference paper 2018
- document
-
Allegaert, Elias (author), Lemmens, Yves (author), la Rocca, G. (author)As the complexity of high-tech systems continuously increases, engineers look for possibilities to reduce time and cost of the development of these systems. Architecture- based design enables a front-loaded design process with knowledge reuse. By enabling the automatic synthesis of simulation models, different configurations of an...conference paper 2017
Pages
- 1
- 2