An effective scheme of joint migration inversion in the pseudo-time domain

Traditional full-waveform inversion is a non-linear and ill-posed inversion problem. To reduce the non-linearity of it, joint migration inversion (joint migration inversion) was proposed as an alternative. Joint migration inversion tries to minimize the mismatch between measured and modelled reflection data. One key feature of joint migration...

Imaging blended vertical seismic profiling data using full-wavefield migration in the common-receiver domain

For vertical-seismic-profiling (VSP) measurements, the use of blended acquisition, with time-overlapping shot records, can greatly reduce the downtime and, thereby, provide large cost savings. For directly imaging blended VSP measurements, we have used full-wavefield migration (FWM). FWM is an inversion-based imaging scheme that enables us to...

3-D acquisition geometry analysis: Incorporating information from multiples

Recent advances in survey design have led to conventional common-midpoint-based analysis being replaced by the subsurface-based seismic acquisition analysis and design, with the emphasis on advance techniques of illumination analysis. Amongst them are wave-equation-based seismic illumination analyses such as the so-called focal beam method. The...

Imaging blended VSP data using full wavefield migration

Blended source and/or simultaneous source acquisition for multi-offset and multi-azimuth VSP measurements can prove significantly beneficial in saving expensive borehole down-time. In the last few years, for the case of surface seismic data, it was proposed to redefine imaging and inversion of the blended data to handle the data directly without...

Focal transformation, an imaging concept for signal restoration and noise removal

Interpolation of data beyond aliasing limits and removal of noise that occurs within the seismic bandwidth are still important problems in seismic processing. The focal transform is introduced as a promising tool in data interpolation and noise removal, allowing the incorporation of macroinformation about the involved wavefields. From a physical...

Imaging of multiple reflections

Current multiple-removal algorithms in seismic processing use either differential moveout or predictability. If the differential moveout between primaries and multiples is small, prediction is the only option available. In the last decade, multidimensional prediction-error filtering by weighted convolution, such as surface-related multiple...