The Mechanism behind Vibration Assisted Fluidization of Cohesive Micro-Silica

Vibro-assisted fluidization of cohesive micro-silica has been studied by means of X-ray imaging, pressure drop measurements, and off-line determination of the agglomerate size. Pressure drop and bed height development could be explained by observable phenomena taking place in the bed; slugging, channeling, fluidization or densification. It...

Effect of vibrational modes on fluidization characteristics and solid distribution of cohesive micro- and nano-silica powders

In this study, the impact of different vibrational modes on the fluidization characteristics of cohesive micro- and nano-silica powder was examined. Fractional pressure drop, bed expansion measurements, and X-ray imaging were utilized to characterize the fluidization quality. The densities of the emulsion phase at the top and bottom of the...

Stirrer design for improving fluidization of cohesive powder: A time-resolved X-ray study

Stirring has been recognized in the literature as a promising technique for facilitating fluidization of cohesive powders, via inputting additional energy to counteract interparticle forces. However, the influence of operating conditions and stirrer configurations on flow behavior remains largely unknown, which impedes the practical...

Simulation of Nanoparticle Agglomerate Fluidization Based on Continuum Theory of Cohesive Particles

Nanoparticles are usually fluidized as agglomerates, which are in dynamic states of agglomeration and fragmentation. It is critical to consider the size distribution of agglomerates in modeling of the fluidization of nanoparticle agglomerates. In this article, the fluidization behavior of nanoparticle agglomerates is investigated using a two...

Time-resolved X-ray study of assisted fluidization of cohesive micron powder: On the role of mechanical vibration

Mechanical vibration has been broadly used to assist fluidization of cohesive powders, because of its capability to disrupt gas channels and agglomerates. However, the improvement reported in literature is mostly deduced from bulk response and ex-situ measurements, whereas the induced fluidization behavior and underlying physics remain...

Tailoring the flow properties of inhaled micronized drug powders by atomic and molecular layer deposition

For dry powder inhaled formulations, good flow behaviour is vital in re-dispersing the powder. However, inhaled drug powders with a particle size below 10 µm are classified as highly cohesive materials with poor flow characteristics. Here we demonstrate how to alter the flow properties of micronized budesonide powders by depositing different...

On the fluidization of cohesive powders: Differences and similarities between micro- and nano-sized particle gas–solid fluidization

The fluidization of cohesive powders has been extensively researched over the years. When looking at literature on the fluidization of cohesive particles, one will often find papers concerned with only micro- or only nano-sized powders. It is, however, unclear whether they should be treated differently at all. In this paper, we look at...

Experimental methods in chemical engineering: Pressure

Pressure and temperature are the most important state variables for monitoring physicochemical processes to detect deviations that might lead to explosions and to verify levels, flow rate, and solids/gas hold-up. Pressure fluctuations in multi-phase systems identify regime changes and flow anomalies. Pressure signals are the first indicator...

Enhanced Optical Performance of BaMgAl₁₀O₁₇: Eu²⁺ Phosphor by a Novel Method of Carbon Coating

Many strategies have been adopted to improve thermal degradation of phosphors. Because of the stability and high transmittance of graphene, here we report a novel method of carbon coating on BaMgAl₁₀O₁₇:Eu²⁺ (BAM) phosphor particles through chemical vapor deposition. The chemical composition, microstructure,...