A Thermoelectric Energy Harvesting System Assisted by A Piezoelectric Transducer Achieving 10-mV Cold-Startup and 82.7% Peak Efficiency

This article presents a 10mV-startup-voltage thermoelectric energy harvesting system, assisted by a piezoelectric generator (PEG) as a cold starter. It exploits the fact that when a thermoelectric energy harvesting system is implemented in a place where kinetic energy is also present, the PEG starter can provide a clock signal to start the...

Hierarchical Motion Planning and Tracking for Autonomous Vehicles Using Global Heuristic Based Potential Field and Reinforcement Learning Based Predictive Control

The autonomous vehicle is widely applied in various ground operations, in which motion planning and tracking control are becoming the key technologies to achieve autonomous driving. In order to further improve the performance of motion planning and tracking control, an efficient hierarchical framework containing motion planning and tracking...

Speed and heading control-based collision avoidance for a ship towing system

Collision avoidance is a priority task for ensuring the safety of a maritime transportation system. However, for a ship towing system, which is characterized by multiple vessels and physical connections, the research works about collision avoidance is limited. Thus, this paper proposes a speed and heading control-based conflict resolution of...

A Single-Stage Three-Mode Reconfigurable Regulating Rectifier for Wireless Power Transfer

In this article, we propose a reconfigurable regulating rectifier with a wide operational range for wireless power transfer. The proposed three-mode rectifier achieves a broad range voltage regulation without global loop control to minimize the chip area occupation. Compared with previous work, more working modes and greater voltage gain...

High temperature viscoplastic deformation behavior of sintered nanocopper paste used in power electronics packaging: Insights from constitutive and multi-scale modelling

As a promising technology for high-power and high-temperature power electronics packaging, nanocopper (nanoCu) paste sintering has recently received increasing attention as a die-attachment. The high-temperature deformation of sintered nanoCu paste and its underlying mechanisms challenge the reliability of high-power electronics packaging. In...

Sustainable Assessment Tools for Higher Education Institutions: Developing Two-Hierarchy Tools for China

Higher Education Institutions (HEIs) play an increasingly significant role in the practice of sustainability. For HEIs in their early stages of sustainability, they are still in need of sustainable assessment tools (SATs) that are suitable for their local context and also lead international sustainable development. The purpose of this paper is...

The Multimodal Information Based Speech Processing (Misp) 2022 Challenge: Audio-Visual Diarization And Recognition

The Multi-modal Information based Speech Processing (MISP) challenge aims to extend the application of signal processing technology in specific scenarios by promoting the research into wake-up words, speaker diarization, speech recognition, and other technologies. The MISP2022 challenge has two tracks: 1) audio-visual speaker diarization (AVSD),...

An Output Bandwidth Optimized 200-Gb/s PAM-4 100-Gb/s NRZ Transmitter With 5-Tap FFE in 28-nm CMOS

This article presents a 200-Gb/s pulse amplitude-modulation four-level (PAM-4) and 100-Gb/s non-return-to-zero (NRZ) transmitter (TX) in 28-nm CMOS technology. To achieve the target data rate, the output bandwidth and swing of the proposed TX are optimized by minimizing the output capacitance of the 4:1 multiplexer (MUX) and driver stage with...

A 200Gb/s PAM-4 Transmitter with Hybrid Sub-Sampling PLL in 28nm CMOS Technology

This paper presents a complete 200Gb/s PAM-4 transmitter (TX) in 28nm CMOS technology. The transmitter features a hybrid sub-sampling PLL (SSPLL) with a delta-sigma (?S) modulator, clock distribution network with flexible timing control, and data path with a hybrid 5-tap Feed-Forward Equalizer (FFE) and T-coil for bandwidth extension. The...

Study on vertical vibration and transmission characteristics of railway ballast using impact hammer test

The vertical vibration and transmission characteristics of ballast are key factors that affect the dynamic stability of railway track structures and control the settlement of ballasted beds. Therefore, the following study was conducted to explore this topic. Firstly, through an impact hammer test on a ballast sensor with embedding chip, the...

Design and assessments on a hybrid pin fin-metal foam structure towards enhancing melting heat transfer: An experimental study

Solar energy, as a kind of renewable energy, offers a large reserve to be harvested at a reasonably low cost for engineering applications. To decouple the temporal and spatial relevance of the continuous energy supply of solar energy, latent heat thermal energy storage can deal with this problem at different temperatures. Aiming to improve...

A Ring-Oscillator Sub-Sampling PLL With Hybrid Loop Using Generator-Based Design Flow

We present a ring-oscillator-based sub-sampling phase-locked loop (PLL) using a generator-based design flow. A hybrid loop with a delta-sigma ($\Delta \Sigma$) modulator is applied to reduce the loop filter (LF) area and the control ripple. The generator automatically produces the ring oscillator and PLL to meet the provided specifications. The...

The First Multimodal Information Based Speech Processing (Misp) Challenge: Data, Tasks, Baselines And Results

In this paper we discuss the rational of the Multi-model Information based Speech Processing (MISP) Challenge, and provide a detailed description of the data recorded, the two evaluation tasks and the corresponding baselines, followed by a summary of submitted systems and evaluation results. The MISP Challenge aims at tack-ling speech processing...

Effect of filler on performance of porous asphalt pavement using multiscale finite element method

Porous asphalt (PA) pavements are widely employed in areas with wet climates. As particle enhancement inclusions in asphalt mastic, mineral fillers play essential roles in improving the performance of PA pavements. This study developed a coupled multiscale finite element (FE) model, involving the mesostructure of PA mixture and PA pavement....

Ca-modified Al–Mg–Sc alloy with high strength at elevated temperatures due to a hierarchical microstructure

Al-Mg alloys are normally prone to lose part of their yield and tensile strength at high temperatures due to insufficient thermal stability of the microstructure. Here, we present a Ca-modified Al–Mg–Sc alloy demonstrating high strength at elevated temperatures. The microstructure contains Al₄Ca phases distributed as a network...

Geocon bridge geopolymer concrete mixture for structural applications

The sustainability of infrastructure projects is becoming increasingly important issue in engineering practice. This means that in the future the construction materials will be selected on the basis of the contribution they can make to reach sustainability requirements. Geopolymers are materials based on by-products from industries. By using...