Recycling waste tyre polymer for production of fibre reinforced cemented tailings backfill in green mining

The increasing amount of solid waste, e.g., waste tyres from car industry and tailings from mine operations, causes substantial environmental and societal issues. The recycled tyre polymer fibre (RTPF) reinforced cemented tailings backfill (CTB) is a kind of composite that can treat waste tyres and tailings simultaneously and realize green...

环氧沥青固化过程中的粘度特性

In this study, a series of viscosity tests were performed to investigate various conditions, i.e. temperature, shear rate and dilution level, on the curing behavior of epoxy bitumen. The results show that curing rate of epoxy bitumen increased with temperature; high shear rate would interfere the formation of crosslinks in epoxy bitumen,...

Fresh and hardened properties of alkali-activated slag concrete: The effect of fly ash as a supplementary precursor

The present study explores the possibility of replacing blast furnace slag (BFS) with coal fly ash (FA) to produce alkali-activated material (AAM) concrete with hybrid precursors. With an increased FA replacement ratio, the reaction kinetics, fresh and hardened properties of AAM mixtures have been investigated. The retardation effect on the...

Effect of Bio-oil on Rheology and Chemistry of Organosolv Lignin–Modified Bitumen

Lignin, one of the most abundant natural polymers, has been extensively studied as an additive in bituminous binders. Even though the lignin improves the overall resistance against oxidative aging of bitumen, it could lead to high thermal cracking sensitivity. In this study, a bio-oil (i.e., rapeseed oil) is implemented in lignin-modified...

Investigating the High- And Low-Temperature Performance of Warm Crumb Rubber-Modified Bituminous Binders Using Rheological Tests

Rubberized asphaltic materials have been frequently combined with warm-mix asphalt technologies to tackle the issues of high energy consumptions and emissions during construction. Effective and accurate characterization of binder properties is conducive to the improvement of long-term pavement performance. The current study aims to quantify...

The continuous swelling-degradation behaviors and chemo-rheological properties of waste crumb rubber modified bitumen considering the effect of rubber size

The chemo-rheological properties of crumb rubber modified bitumen are always unstable due to the mutable and uncontrollable swelling-degradation degree of crumb rubber in bitumen matrix. The study aimed at exploring the continuous swelling and degradation behaviors of crumb rubber modified bitumen (CRMB) considering the influence of rubber size...

Multi-scale characterization of lignin modified bitumen using experimental and molecular dynamics simulation methods

Lignin, as a major waste from biofuel and paper industries, could be utilized as a modifier to enhance the relevant performance of bitumen. However, the effects of lignin on the thermodynamics properties and molecular structure of bitumen are rarely studied. Meanwhile, the potential modification mechanism of lignin modified bitumen is still...

An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibration

Fresh concrete needs vibration to compact, fill the mould and reach a dense state. During the compaction process, coarse aggregates (CAs) tend to settle, affecting the homogeneity and eventually the long-term durability of hardened concrete. In this study, a 3-D, multi-phase numerical model for fresh concrete is developed for better...

Laboratory evaluation of the effects of long-term aging on high content polymer modified asphalt binder

One of the most widely used polymer-based modifiers in asphalt binders is styrene–butadiene–styrene (SBS), which results in binders of increased modulus, strength, toughness, and resistance to permanent deformation. These properties are further improved with the increase of SBS polymer content in asphalt binders, producing binders such as high...

Ageing effect on chemo-mechanics of bitumen

Ageing has a significant impact on the chemical and mechanical behavior of bituminous materials. In this study, Fourier Transform Infrared (FTIR) spectrometer and Dynamic Shear Rheometer (DSR) tests were utilized to investigate the effect of ageing on the chemical and mechanical properties of bitumen. Bitumen films with thickness of 2 mm were...

Characterization and Identification of Bituminous Materials Modified with Montmorillonite Nanoclay

Montmorillonite (Mt) nanoclay is a layered silicate mineral with a 2:1-type layer structure, two tetrahedrals sandwiching one octahedral. In recent decades, it is successfully introduced into polymer systems to form polymer-clay nanocomposites (PCN) in which the silicate layers of the Mt are randomly and homogeneously dispersed at a molecular...