Searched for: collection%253Air
(81 - 100 of 170)

Pages

document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), van Duijsen, P.J. (author), Bauer, P. (author)
In high-power wireless battery charging that uses inductive power transfer, a considerable amount of power losses are located in the transmitter and receiver coils because they carry high resonant currents and typically have a loose coupling between them which increases eddy current losses. Therefore, the nominal operation needs to be chosen...
conference paper 2020
document
Vree, D. (author), Beloqui Larumbe, L. (author), Qin, Z. (author), Bauer, P. (author), Ummels, B.C. (author)
In this decade, a significant amount of additional wind and solar power will be integrated in the Dutch high voltage grid. The 383 MW nearshore Wind Park Fryslân is foressen to be connected to the Dutch 110kV grid in 2020 through two 55km cable circuits. To quantify the risks of exceeding emission levels for both the TSO and the wind farm...
conference paper 2020
document
Stecca, M. (author), Ramirez Elizondo, L.M. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Energy Storage Systems (ESSs) are promising solutions for mitigating the technical problems created by high penetration of Distributed Generation (DG) in distribution grids. This paper presents a methodology for the ESS sizing and placement within the distribution networks. Those are found through an optimization routine that considers the...
conference paper 2020
document
Shi, W. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper aims to investigate the radiated magnetic field by 11 kW inductive power transfer (IPT) systems used for the charging of electric vehicles. Two reference designs suggested by SAE J2954 are studied. Both designs are analysed to obtain the coils winding currents, and 3D FEM models are built in COMSOL without considering the car chassis,...
conference paper 2020
document
Desmedt, Michiel (author), Dong, J. (author), Wani, F.M. (author), Bauer, P. (author), Polinder, H. (author)
This paper analyses the electromechanical dynamics of the pole-piece rotors in a pseudo direct-drive wind turbine generator. The investigated generator has a rated power of 10 MW and was designed in the INNWIND.EU project. One way coupled finite element analysis (FEA) was used to calculate the rotor dynamic defections caused by...
conference paper 2020
document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
In inductive power transfer applications, it is possible to ensure high efficiency of the main coils by operating at the optimum load. Since the optimum load depends on the coupling between the main coils, the operation needs to be adapted to match this case at different alignment conditions. This paper proposes a method to keep the optimum load...
conference paper 2020
document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), van Duijsen, P.J. (author), Bauer, P. (author)
Industrial wireless charging systems use standardized coils to guarantee interoperability between different manufacturers. In combination with these coils, the compensation network can still be designed and optimized. This paper explains the step-by-step design of the compensation network for a 7.7 kW wireless charging system (power class WPT2),...
conference paper 2020
document
Purgat, P. (author), Bandyopadhyay, S. (author), Qin, Z. (author), Bauer, P. (author)
This paper proposes a power flows decoupling controller for the triple active bridge converter. The controller is based on a full-order continuous-time model of the TAB converter derived using the generalized average modelling (GAM) technique. GAM uses the Fourier series expansion to decompose the state-space variables into two components,...
conference paper 2020
document
Grazian, F. (author), van Duijsen, P.J. (author), Roodenburg, B. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
In inductive power transfer applications that use resonant compensation networks, the commonly employed H-bridge inverter should be kept operating in soft-switching to ensure high power efficiency and low irradiated electromagnetic noise. To achieve so, the zero-crossing detection circuit for the resonant current or voltage must be fast and...
conference paper 2020
document
Beloqui Larumbe, L. (author), Qin, Z. (author), Bauer, P. (author)
A voltage imbalance at the AC terminals of a three-phase inverter creates a ripple in the power signal on the DC side. In order to minimize this ripple, several techniques can be applied, in which a double Synchronous Reference Frame (SRF) current control structure is very typical. In this approach, both the positive and negative sequence...
conference paper 2020
document
Stecca, M. (author), Soeiro, Thiago B. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author), Palensky, P. (author)
This paper discusses a qualitative comparison between Two and Three-Level Voltage Source Converter (VSC) topologies for battery energy storage applications. Three-Level Neutral Point Clamped (NPC) and T-Type circuit topologies are benchmarked versus the state-of-art Two-Level VSC in terms of efficiency and power density considering a 100 kW...
conference paper 2020
document
Dong, J. (author), Soeiro, Thiago B. (author), Koeners, G.J.M. (author), Bauer, P. (author)
This paper presents a method to implement online laboratory sessions for education in Electrical Engineering on subjects related to electrical machines and drives. The assignments for the laboratory sessions consist of: the preparation homework, where students have to study relevant theories; the development of circuit simulations; and the...
conference paper 2020
document
Yu, Y. (author), Shekhar, A. (author), Chandra Mouli, G.R. (author), Bauer, P. (author), Refa, Nazir (author), Bernards, Raoul (author)
This study aims to quantity the impact of uncontrolled charging of Electric Vehicles (EVs) on the low voltage distribution networks with increasing EV penetration levels. For this objective, key indicators are developed to show the magnitude, scale and duration of the impact on the distribution network. The disseminated results are based on the...
conference paper 2020
document
Son, Changbum (author), Dong, J. (author), Bauer, P. (author)
This paper analyses the electromagnetic resulted acoustic noise of an interior permanent magnet synchronous machine (IPMSM). The influences of electromagnetic nonlinearity, pulse-width-modulation (PWM) and motor frame on the acoustic noise are considered. A finite element model is used to extract the look up tables (LUTs) of flux linkage and air...
conference paper 2020
document
Xu, Junzhong (author), Gao, Fei (author), Soeiro, Thiago B. (author), Chen, Linglin (author), Tarisciotti, Luca (author), Tang, Houjun (author), Bauer, P. (author)
The implementation of traditional finite-control-set model predictive control (FCS-MPC) with variable switching frequency in voltage source rectifiers (VSRs) can make the system suffer from poor current harmonics performance. In fact, the resulting wide-spread voltage harmonic generated at the AC terminals makes the design of the typical multi...
conference paper 2020
document
Stecca, M. (author), Soeiro, Thiago B. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author), Palensky, P. (author)
LCL filters are commonly adopted to attenuate the current harmonics produced by Pulse Width Modulation (PWM) Voltage Source Converters (VSC). Due to the nature of LCL filters, several combinations of L and C can deliver the attenuation required by the standards. The optimal configuration is generally evaluated, considering power density, costs,...
conference paper 2020
document
Xu, Junzhong (author), Gao, Fei (author), Soeiro, Thiago B. (author), Chen, Linglin (author), Tarisciotti, Luca (author), Tang, Houjun (author), Bauer, P. (author)
In the applications of three-phase two-level voltage source inverters (VSIs) relatively large energy storage capacitors are used to absorb the high DC-link current ripples mainly caused by the circulating reactive power, the switched AC phase current flowing to the DC-link, and other dynamic and/or asymmetric operating conditions. Especially for...
conference paper 2020
document
Shi, W. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper proposes a new method of electric vehicles detection (EVD) and foreign objects detection (FOD) for dynamic inductive power transfer (DIPT) systems. The proposed detection method applies both passive coil sets (PCSs) and active coil sets (ACSs) to achieve both EVD and FOD with a high detection sensitivity. The operation mechanisms...
conference paper 2020
document
Grazian, F. (author), van Duijsen, P.J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
In charging applications, wireless power transfer (WPT) is mostly used in the form of inductive power transfer with magnetic resonant coupling. Therefore, both the transmitter and the receiver coils are combined with capacitors, such that only active power is transferred. To evaluate the operation of the WPT charging system, its equivalent...
conference paper 2019
document
Wu, Y. (author), Shekhar, A. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Back-To-Back (B2B) Voltage Source Converter (VSC) with AC-side LCL filters can be adopted for parallel AC-DC distribution links. In this paper, Grid-side Current Control (GCC) for the inner/fast control loops of the front- and backend power electronics are implemented in order to enhance the system performance against grid disturbances. Herein,...
conference paper 2019
Searched for: collection%253Air
(81 - 100 of 170)

Pages