Searched for: contributor%3A%22Jansen%2C+A.J.+%28mentor%29%22
(1 - 20 of 40)

Pages

document
van Zuuk, Art (author)
Cycling, a sport with a rich history, is experiencing rapid growth in popularity (Braeckevelt, 2019). It is known for its numerous health benefits, including reducing cardiovascular risks and obesity (Oja et al., 2011).<br/><br/>Despite being perceived as a low-impact activity, research conducted by Delft University of Technology reveals that...
master thesis 2024
document
Kemme, Daan (author)
The goal of this graduation thesis is to design a bicycle computer mount (BCM) that connects bike computers with road cycling handlebars in a visually appealing, and aerodynamic way. Initiated between Delft University of Technology and a leading sports equipment company, the project addresses the evolving needs of cyclists regarding maximum...
master thesis 2024
document
van der Linden, Bowien (author)
The objective of this thesis is to enhance existing harness designs, with a focus on reducing discomfort and enhancing overall performance.<br/>The contextual analysis, literature review, and desktop research yielded crucial insights and identified areas of improvement. Supplementary interviews were conducted with the user group. Initially,...
master thesis 2023
document
Dooley, Erin (author)
Prostheses and orthoses are trending towards digital methods and automation. Adopting these methods is especially a challenge at Frank Jol, a clinic where patients' wide variety in residual limb characteristics and high activity demands pose a challenge for digital workflows which utilise 3D scanning to arrive at a final prosthesis. This is...
master thesis 2023
document
Luu, Nancy (author)
For this graduation thesis, the goal is to design a backpack that is suitable for fast hiking with women specific sizes, features, and accessories. The selection for the design of a backpack for female hikers was chosen because current backpacks on the market are designed with men in mind therefore, female users experience more issues with...
master thesis 2023
document
Hendriks, Fenne (author)
In this research a double diamond method was used to redesign a gymnastic crashmat to enable easier transportation without reducing its functionality. This was done since the presence of such mats is questionable in event halls, mainly in international competitions. This makes it impossible for athletes to make use of crashmats during training...
master thesis 2023
document
Herde, Marlon (author)
Repair is gaining popularity over the last few years but still is under-represented in society. This project does research backpack repair, especially home repairs by users. Backpacks are generally easy to understand in their construction, as the seams and patterns are visi- ble. Still, repairing is not common because of different factors. User...
master thesis 2022
document
Nieuwenhuizen, Stephanie (author)
This report contains a full description of my graduation project for my Master degree in Design for Interaction (Industrial Design Engineering at Delft University of Technology). I did this project in collaboration with the start-up company Sports-f(x), the creators of the NextRound boxing system.<br/><br/>The NextRound boxing system currently...
master thesis 2022
document
Sammarco, Matteo (author)
The project focused on improving Olympic foiling classes sailing athletes' safety: Nacra 17, iQFOiL, and IKA Formula Kite. The primary objective was to investigate dangerous circumstances with foil sailors to research the mechanisms that cause injuries and develop a design solution to prevent them. The research performed provides an integrated...
master thesis 2021
document
Van Steen, Elien (author)
During the course of this thesis, the design of a knee brace that improves the quality of life for people with arthritis in the knee, is being researched. The knee joint is covered with articular cartilage which protects the bones from being damaged. Arthritis of the knee is a pathology where this cartilage is damaged potentially even to the...
master thesis 2021
document
Looijen, Timo (author)
Javelin throwing in the winter is not fun when the temperature approaches zero degrees. That is way javelin throwers move indoors for training. The problem with training indoors it that there is no room to throw a javelin 80 meters, so a different type of training is used. The javelin fitted with a rubber tip is thrown into a net. This way, the...
master thesis 2020
document
Marinel-lo Amat, Maximilià (author)
Trials is a subdiscipline of mountain biking that consists of two variants: one practiced with a trials bicycle and one with a trials motorcycle. Though these two disciplines have the same basic requirements, there are clear distinctions in the technical sports gestures that the respective athletes employ. This is due to some fundamental...
master thesis 2019
document
Mane, Sanket (author)
Cycling in hot and humid environment is demanding for the body. Olympics 2020 will be in Tokyo and the weather is expected to be hot and humid. Performance of the cyclist will be below par if they do not adopt various strategies to keep themselves cool. This project focuses on the development of new jersey with PVA fabric integrated in it to...
master thesis 2019
document
Akershoek, Rob (author)
The aim of this thesis is to analyze if a fully electric super yacht is feasible, desirable and viable. This is done using a “research by design” approach using the current (and future) drivers, enablers and barriers to design a concept.<br/><br/>First, a vision is developed using the ViP (Vision in Product design) method, in order to create a...
master thesis 2018
document
Spijkerman, B. (author)
Discus throwing outdoors provides the coach and athlete with direct feedback on the performance in the form of a final distance. Even by eye this can intuitively be judged. When switching to indoor training come winter, this intuitive measure is taken away as the athletes throw into a net suspended 5–8 metres in front of them. The coach believes...
master thesis 2017
document
Dijkema, E. (author)
The goal of the ASICS- Innovation on the move project was to provide ASICS with more insight into their current innovation processes and provide them with recommendations on how these could be improved. A design project was executed to illustrate the strategic recommendations. This led to the design of ASICS Vibe. Vibe is a wearable device which...
master thesis 2017
document
Oude Nijhuis, R. (author)
Avalanches cause injuries to more than 1500 people on an annual basis. 150 of those victims do not live to tell the tale. As such, avalanches are the most prominent safety concern for freeriders. Most lives can be saved by prolonging the breathing period that buried avalanche victims have from 15 minutes (after which acute asphyxiation occurs)...
master thesis 2016
document
Van Berchum, V.A.H. (author)
This masker thesis describes the design process of the basketball backstop of the future. A basketball backstop is the piece of equipment with a ring, on which the players score during a game of basketball. The game of basketball is changing; fans want a more engaging game experience and sports marketing becomes increasingly important. Schelde...
master thesis 2016
document
Wibbens, B.P. (author)
In the early 2000’s, the field hockey stick faced a transition from wood towards composites. Since then, the trend is to produce stiffer sticks by applying more carbon fibre to reinforce the composite. With the use of composites, sticks became lighter and stiffer, resulting in hitting the ball harder. However, the stiffer stick reduced the...
master thesis 2016
document
Konietschke, V.L.M. (author)
Climbing indoors is growing in popularity and is even considered to be included in the Olympic games of 2020 in Japan. Despite the fact that numerous new climbing gyms are being built, there has been little innovation in the gyms themselves. For decades, climbing gyms have wooden walls with plastic holds screwed onto them, and the question...
master thesis 2015
Searched for: contributor%3A%22Jansen%2C+A.J.+%28mentor%29%22
(1 - 20 of 40)

Pages