An enhanced high-resolution EMCCD-based gamma camera using SiPM side detection

To improve multi-pinhole single photon emission computed tomography (SPECT) devices we are developing a high-resolution gamma detector consisting of a 3-mm-thick scintillation crystal that converts gamma photons to light, on top of an optically coupled high-resolution, high-sensitivity light sensor (EMCCD). This gamma camera can detect...

LaBr3:Ce and SiPMs for time-of-flight PET: Achieving 100 ps coincidence resolving time

The use of time-of-flight (TOF) information in positron emission tomography (PET) enables significant improvement in image noise properties and, therefore, lesion detection. Silicon photomultipliers (SiPMs) are solid-state photosensors that have several advantages over photomultiplier tubes (PMTs). SiPMs are small, essentially transparent to 511...

Optical simulation of monolithic scintillator detectors using GATE/GEANT4

Much research is being conducted on position-sensitive scintillation detectors for medical imaging, particularly for emission tomography. Monte Carlo simulations play an essential role in many of these research activities. As the scintillation process, the transport of scintillation photons through the crystal(s), and the conversion of these...

A novel, SiPM-array-based, monolithic scintillator detector for PET

Silicon photomultipliers (SiPMs) are of great interest to positron emission tomography (PET), as they enable new detector geometries, for e.g., depth-of-interaction (DOI) determination, are MR compatible, and offer faster response and higher gain than other solid-state photosensors such as avalanche photodiodes. Here we present a novel detector...

Monolithic scintillator PET detectors with intrinsic depth-of-interaction correction

We developed positron emission tomography (PET) detectors based on monolithic scintillation crystals and position-sensitive light sensors. Intrinsic depth-of-interaction (DOI) correction is achieved by deriving the entry points of annihilation photons on the front surface of the crystal from the light sensor signals. Here we characterize the...