Searched for: faculty%3A%22Mechanical%252C%255C+Maritime%255C+and%255C+Materials%255C+Engineering%22
(101 - 120 of 2,066)
- document
- Rietveld, L.P.W. (author) master thesis 2017
- document
-
Schuttevaer, D. (author)Confidential thesis, only summary available.master thesis 2017
- document
-
Cramer, S.J.E. (author)Apnea of prematurity is one of the most common diagnoses in the Neonatal Intensive Care Unit. Frequent breathing pauses occur in almost all infants born at <28 weeks gestational age or with a birth weight of <1000g and can result in serious brain damage. Medicines are used to suppress the apnea but are not able to eliminate it. Manual tactile...master thesis 2017
- document
-
de Winter, A.J. (author)At this moment a revolution is going on in the development of our vehicles. The driver is going to be replaced by the vehicle itself. To investigate this autonomy Delft University of Technology (TU Delft) is project leader of a partnership called Dutch Automated Vehicle Initiative (DAVI). This group of industry and academics are combining their...master thesis 2017
- document
-
Zwart, W.E. (author)In order to guarantee safe operations in the offshore industry, at all time it is necessary to predict motion behaviour of structures in specific sea states accurately. Safety is very important for the offshore industry, which can come in jeopardy when motions are either extreme or unexpected with regards to predicted motion behaviour. This...master thesis 2017
- document
- Wagter, A.F. (author) master thesis 2017
- document
- Scheepers, T.H.E. (author) master thesis 2017
- document
- Joziasse, B.L. (author) master thesis 2017
- document
- Prieckaerts, V.E.M. (author) master thesis 2017
- document
-
Bouhuys, C.W. (author)On one hand, welded hulls of aluminium high speed craft are found to have a decreased displacement. On the other hand, ship stability is determined based on an inclination test and the design lines plan. The combination of reduced displacement, results of an inclination test and the design lines plan reduce the stability. This reduction is...master thesis 2017
- document
-
Komninakidis, E. (author)Purpose: This study aims on the automated generation of IMRT treatment plans for lung cancer patients. We systematically evaluated the input number of beams, the comparison between the equal distance versus optimized beam directions and the comparison between coplanar and non-coplanar plans. Finally, a dose escalation problem tried to be solved...master thesis 2017
- document
-
Bierbaum, S. (author)Myoelectric as well as body-powered hand prostheses, the two commercially available prosthetic control types, have both their specific advantages. Advanced myoelectric prostheses for example have the characteristic of facilitating multiple degrees of freedom due to grip type variation and/or wrist movements. Compared to prosthetic devices with...master thesis 2017
- document
-
van Bodegom, R.M.G.P. (author)Background: Minimally Invasive Surgery (MIS) gained increasing support in the surgical community over the last decades. Due to the rigid tip of current used rigid instruments the maneuverability is limited during a procedure. To increase maneuverability steerable instruments have been developed. However current handheld steerable instruments...master thesis 2017
- document
- de Bode, A. (author) master thesis 2017
- document
- Loos, B. (author) master thesis 2017
- document
-
Scholten, T.C. (author)Topology optimization is widely used within the academic environment. It is however not yet a standard design tool within the commercial industry. My research aims to shorten this gap by applying a topology optimization for an industrial design load. The design load is from a Printed Circuit Assembly (PCA) that requires active cooling in order...master thesis 2017
- document
- Niewold, F.W.J. (author) master thesis 2017
- document
-
Pedrero Pérez, A. (author)Introduction: Preterm neonates suffer frequent thermal alterations that result in increased morbidity and mortality rates. Thermal support is used to provide stability until thermal maturation is reached. The first manifestation of thermal control is peripheral vasoconstriction, estimated as the difference between central and peripheral...master thesis 2017
- document
-
Hengeveld, S. (author)Recently a new framework to predict fatigue crack growth has been developed based on the Thick Level Set method. The aim of this thesis is to extend this framework to allow for realistic loading spectra. First, a calibration method for this framework is presented. This method decouples crack growth, defined by a Paris like equation, from the...master thesis 2017
- document
-
De Jong, P.H. (author)The design of the ordinary bicycle has barely changed since the end of the 19th century. Until then it evolved to a well ridable machine with no need for further drastic modifications. However, around 2011 it was shown that, just like an ordinary bicycle, strange appearing designs could also be stable. One of these designs was a bicycle that...master thesis 2017
Searched for: faculty%3A%22Mechanical%252C%255C+Maritime%255C+and%255C+Materials%255C+Engineering%22
(101 - 120 of 2,066)