Searched for: mods_note_programme_s%3A%22Electrical%255C+Engineering%255C+%257C%255C+Sustainable%255C+Energy%255C+Technology%22
(1 - 20 of 628)

Pages

document
Agten, Melvin (author)
During the development of an aerodynamic analysis tool to predict non-linear lift and drag coefficients, research was performed on arbitrary wing configurations focusing on airborne wind energy (AWE) applications. The purpose of this research is to develop and examine the accuracy of computationally fast aerodynamic methods. The non-linear part...
master thesis 2012
document
Benlevi, Aksel (author)
master thesis 2014
document
Joshi, Hardik (author)
Unmanned aerial vehicles (UAV) for science missions are becoming increasingly popular in the present context. Science missions require high altitude operation and long endurance (HALE). With rising awareness of climate change phenomenon it becomes imperative to look into more efficient and more sustainable means of powering these missions. A ...
master thesis 2014
document
Ramelis, Vaidas (author)
As building insulation and airtightness are constantly improving, ventilation plays a dominant role in fresh air supply, thermal comfort and managing heat losses and cooling needs. By designing an integrated ventilation system, it is possible to improve air quality and thermal comfort, at the same time enhancing energy efficiency. This thesis...
master thesis 2015
document
Cao, Jiongyi (author)
master thesis 2015
document
Kalenteridis, Stefanos (author)
The reduction of the Levelised Cost of Electricity (LCoE) in wind energy, and offshore in particular, is among the main objectives of research in the academia nowadays, and a demanding task as well. Offshore wind farms are capital intensive investments and lowering uncertainties and costs throughout design, planning, installation and operational...
master thesis 2015
document
Dijkstra, Pieter (author)
The thesis is focused on designing a tip-region airfoil for a multi-MW wind turbine. It is approached with the objective of optimizing the geometry of the airfoil for the best trade-off between aero-acoustics and aerodynamic requirements. Using the wind turbine noise prediction tool SILANT it is established that trailing edge noise is the most...
master thesis 2015
document
Katsouris, George (author)
As part of the effort to reduce the cost of offshore wind energy, this thesis addresses the problem of the design of the infield cable topology for offshore wind farms. The final outcome of the project is a tool that can be implemented in a more general optimization platform for offshore wind farm design. Therefore, the main objective is to...
master thesis 2015
document
Wessels, Rik (author)
The EU goals to decrease wind energy prices are driving the wind energy industry to give more attention to monitoring and improving turbine performance. Meanwhile, as turbines grow bigger and more are placed offshore, performance monitoring costs are increasing, making it more interesting to consider novel devices to measure turbine performance....
master thesis 2015
document
Weninger, Bernhard (author)
In the study described in this thesis, it is demonstrated that combined short-term and long-term energy storage in one device, the battolyzer, is possible. The battolyzer is a device that works as a rechargeable battery, and that is capable of performing highly efficient electrolysis with any excess electricity. The battolyzer was based on the...
master thesis 2016
document
van Eijk, Stefan (author)
Wind turbine design is subject to load calculation standards. These determine material use which in turn affects wind turbine costs. Wind turbine cost reductions are important as they contribute to the economic feasibility of wind turbines. Therefore careful evaluation of the load standards is paramount for wind turbine design. This thesis...
master thesis 2016
document
Valkema, Veerle (author)
Several operational optimization problems occur in the current situation related to the district heating system (DHS) of Utrecht. The present control strategy is not optimized for the current operation of the DHS. This leads to energy losses, exergy losses and higher operational cost.<br/>The goal of this research is to find improved control...
master thesis 2016
document
Gerry Julian Faturrochman, Gerry (author)
Integration of bifacial photovoltaic module with a noise barrier (PVNB) has emerged as one of the promising innovation in the building integrated PV (BIPV) system application. By having the advantage to absorb both the light incident from the front and the rear side of the cell, bifacial PV module is suitable for a vertical installation...
master thesis 2017
document
Chaudhary, Aditya (author)
A tremendous amount of research in improving the efficiency of the single junction crystalline silicon (c-Si) based solar cells has brought its efficiency (26.6%) close to the theoretical maximum achievable conversion<br/>efficiency (29.43%) [1–3]. Thus to further improve the efficiency, new avenues of reducing losses need to be opened up. One...
master thesis 2017
document
Diab, Ibrahim (author)
The past few decades have seen a revival of the interest in wireless power transfer (WPT) long after the first experiments dating as far back as Nikolai Tesla in the 19th century. The rise of the autonomous electronic devices like medical implants, or portable devices like mobile phones, have motivated the search for wireless power charging...
master thesis 2017
document
Rioja Cabanillas, Adriana (author)
Energy demand is constantly increasing and the use of fossil fuels causes an accumulation of carbon dioxide (CO2) which is an important environmental problem that needs to be solved. A promising solution to this problem would be the electrochemical reduction of CO2 to useful products, using the surplus of electricity from renewable sources. This...
master thesis 2017
document
Prakasha, Anand (author)
In the modern world, the load demands on the electrical grids are increasing at a very high rate. Due to increasing power demands and deregulation of the electrical power, the power systems are operated to their maximum capacities.<br/>Many renewable sources are integrated to the conventional grids to meet the increasing load demands. The HVDC...
master thesis 2017
document
Kulkarni, Raunak (author)
Outage scheduling for maintenance in asset management of electrical transmission and distribution system plays an important role in power system reliability. For instance, failure probability of transmission line may change from time to time due to exogenous conditions. Impact of failure or service interruption can be described by using...
master thesis 2017
document
Castillo Gonzalez, Hugo (author)
Despite the fact of the outstanding efficiency of the perovskite-based devices, their current size is<br/>around a few square millimeters. The application of this thin-film technology in module scale requires<br/>an interconnection with optimal laser processing to create a channel for the photo current. In<br/>this project, the relation between...
master thesis 2017
document
Kulkarni, Raunak (author)
Outage scheduling for maintenance in asset management of electrical transmission and distribution system plays an important role in power system reliability. For instance, failure probability of transmission line may change from time to time due to exogenous conditions. Impact of failure or service interruption can be described by using...
master thesis 2017
Searched for: mods_note_programme_s%3A%22Electrical%255C+Engineering%255C+%257C%255C+Sustainable%255C+Energy%255C+Technology%22
(1 - 20 of 628)

Pages