Searched for: subject%253A%2522Transducers%2522
(1 - 20 of 88)

Pages

document
Zou, Z.H. (author), Fokkema, J.T. (author), Baeten, G.J.M. (author), Ziolkowski, A.M. (author)
conference paper 1990
document
Chen, C. (author), Chen, Z. (author), Chang, Z.Y. (author), Pertijs, M.A.P. (author)
This paper presents a power- and area-efficient 9-channel LNA array for piezoelectric ultrasound transducers to enable real-time 3D imaging with miniature endoscopic and catheter-based probes. In view of the relatively low impedance of piezoelectric transducers, the LNA is implemented as a capacitive feedback voltage amplifier, rather than a...
conference paper 2015
document
Gul, F.C. (author), Moradi, M. (author), Benedictus, R. (author), HADJRIA, RAFIK (author), LUGOVTSOVA, YEVGENIYA (author), Zarouchas, D. (author)
Under in-plane compressive load conditions, the growth of a delamination initially induced by an impact can be followed by a fast growth after a threshold level, which leads to a catastrophic failure in composite structures. To avoid reaching this critical level, it is essential to uncover the delamination size and growth pattern in real time....
conference paper 2023
document
Galiana, Shankar (author), Moradi, M. (author), Wierach, Peter (author), Zarouchas, D. (author)
Acousto-ultrasonic composite transducers (AUCT), which are made of piezoceramic materials embedded in a reinforced polymeric matrix, are promising for the health monitoring of composite structures. However, when they are integrated into highly loaded thermoplastic composite structures, ensuring proper joining properties is a challenge. The...
conference paper 2023
document
Saccher, M. (author), Kawasaki, S. (author), Dekker, R. (author)
Recently, focused ultrasound has been proposed to power deeply implanted medical devices. Almost exclusively, lead zirconate titanate (PZT) transducers are used to convert acoustic energy into electrical energy. Unfortunately, these lead containing devices cannot be hermetically encapsulated since that would block the ultrasound. We propose the...
conference paper 2021
document
Hakakzadeh, Soheil (author), Mozaffarzadeh, M. (author), Mostafavi, Seyed Masood (author), Amjadian, Mohammadreza (author), Kavehvash, Zahra (author), Verweij, M.D. (author), de Jong, N. (author)
In circular photoacoustic computed tomography, for data acquisition, a single-element transducer rotates around the region of interest (ROI). Due to the limited acceptance angle of the finite size transducer, the reconstructed image becomes blurred, and tangential resolution/contrast degrades in off-center locations in the ROI. In this paper, we...
conference paper 2021
document
Ramirez, Ana B (author), van Dongen, K.W.A. (author)
The design of ultrasound scanning systems for applications such as breast cancer detection is a challenging task, especially when the number of sources and receivers increases and they become spread over a large surface. In order to determine the number of transducers and above all their position, several approaches could be followed. A simple...
conference paper 2016
document
Saccher, M. (author), Schaijk, Rob van (author), Kawasaki, Shinnosuke (author), Klootwijk, Johan H. (author), Rashidi, A. (author), Giagka, Vasiliki (author), Savoia, Alessandro Stuart (author), Dekker, R. (author)
Capacitive Micromachined Ultrasound Transducers (CMUTs) have many advantages compared to other ultrasonic transducer technologies, especially for implantable devices. However, they require a high bias voltage for efficient operation. To eliminate the need for an external bias voltage, a charge storage layer can be embedded in the dielectric....
conference paper 2023
document
Yue, X. (author), Zou, Yiwei (author), Chen, Zhelun (author), Liang, Junrui (author), Du, S. (author)
Synchronized switch harvesting on inductor (SSHI) is an efficient active rectifier to extract energy generated from piezoelectric transducer in piezoelectric energy harvesting system. Unlike passive rectifiers, SSHI rectifiers require a power supply to drive synchronized switches. Unfortunately, there is no stable supply when the system starts...
conference paper 2022
document
Simoes dos Santos, D. (author), Fool, F. (author), Kim, Taehoon (author), Noothout, E.C. (author), Vos, H.J. (author), Bosch, Johan G. (author), Pertijs, M.A.P. (author), Verweij, M.D. (author), de Jong, N. (author)
Over the past decades, real-time three-dimensional (3D) medical ultrasound has attracted much attention since it enables clinicians to diagnose more accurately. This calls for ultrasound matrix transducers with a large number of elements, which can be interfaced with an application-specific integrated circuit (ASIC) for data reduction. An...
conference paper 2021
document
Kawasaki, S. (author), Westhoek, Y. (author), Subramaniam, I. (author), Saccher, M. (author), Dekker, R. (author)
Using ultrasound to power deeply implanted biomedical devices is a promising technique due to its low attenuation in body tissue and its short wavelength that allows precise focusing of the energy. Ultrasound energy harvesting conventionally has been done using lead zirconate titanate (PZT) ultrasound transducers, which uses the piezoelectric...
conference paper 2021
document
Rivandi, H. (author), Ghosh, Ishaan (author), Lopes Marta da Costa, T.M. (author)
New non-imaging ultrasound applications, such as ultrasound stimulation and ultrasonic power transfer, need sub-millimeter volumetric spatial resolution, electronically control of the focal spot location, high ultrasound intensity, and a tiny form factor. Satisfying these requirements demands a high-frequency phased array ultrasound transducer....
conference paper 2022
document
Yue, X. (author), Chen, Zhelun (author), Zou, Yiwei (author), Du, S. (author)
Ultrasonic wireless power transfer (WPT) has been proved to be a promising approach to power biomedical implants. To extract the energy generated from the transducer, a rectifier is typically required. Previous inductor-based rectifiers (SSHI and SECE) require a large off-chip inductor to achieve good performance, which is not desired for...
conference paper 2022
document
Cai, Z. (author), van Veldhoven, Robert (author), Suy, Hilco (author), de Graaf, G. (author), Makinwa, K.A.A. (author), Pertijs, M.A.P. (author)
The measurement of carbon-dioxide (CO2) concentration is very important in home and building automation, e.g. to control ventilation in energy-efficient buildings. This application requires compact, low-cost sensors that can measure CO<sub>2</sub> concentration with a resolution of &lt;200 ppm over a 2500ppm range. Conventional optical (NDIR...
conference paper 2018
document
Mohd Isa, W.H.B. (author), Hunt, A. (author), Hassan HosseinNia, S. (author)
Limitations of conventional actuators and sensors in small-scaled and complex devices have diverted the researches' attentions towards smart material transducers such as ionic polymer-metal composites (IPMCs). In addition to actuation capabilities, IPMCs generate voltage when subjected to mechanical deformation. Utilization of IPMCs as...
conference paper 2020
document
Saccher, M. (author), Lolla, Sai Sandeep (author), Kawasaki, S. (author), Dekker, R. (author)
Ultrasound (US) has recently gained attention for powering and communication with implantable devices due to its short wavelength and low attenuation. However, beam mis-alignments cause a sharp decrease in the amount of transferred power and quality of communication. This work investigates a telemetry protocol that relies on the difference in...
conference paper 2022
document
Wardhana, G.K. (author), Mastrangeli, Massimo (author), Lopes Marta da Costa, T.M. (author)
2D phased array ultrasonic transducers realized through the combination of bulk piezoelectric ceramics and complementary metal-oxide-semiconductor (CMOS) integrated circuits (IC) are enabling a new range of wearable ultrasound therapeutic applications. Traditional therapeutic ultrasound transducers have an air backing layer to maximize...
conference paper 2022
document
Simoes dos Santos, D. (author), Fool, F. (author), Kim, Taehoon (author), Noothout, E.C. (author), Rozsa, N.N.M. (author), Vos, H.J. (author), Bosch, Johan G. (author), Pertijs, M.A.P. (author), Verweij, M.D. (author), De Jona, Nico (author)
Over the past decades, ultrasound imaging has made considerable progress based on the advancement of imaging systems as well as transducer technology. With the need for advanced transducer arrays with complex designs and technical requirements, there is also a need for suitable tools to characterize such transducers. However, despite the...
conference paper 2022
document
Colas, Quorentin (author), Bantignies, Claire (author), Perroteau, Marie (author), Porcher, Nicolas (author), Vassal, Steeven (author), Bosch, Johan G. (author), de Jong, N. (author), Verweij, M.D. (author), Pertijs, M.A.P. (author)
Three-dimensional ultrasound has initially been used to address volumetric imaging for diagnostic purposes and represents the leading-edge technological orientation in both transducer and IC (integrated circuit) architecture and design. However, new applications are coming up like biomarker measurements, preoperative navigation, real time...
conference paper 2022
document
Adelmann, C. (author), Ciubotaru, F. (author), Meng, F. (author), Cotofana, S.D. (author), Couet, S. (author)
While magnetic solid-state memory has found commercial applications to date, magnetic logic has rather remained on a conceptual level so far. Here, we discuss open challenges of different spintronic logic approaches, which use magnetic excitations for computation. While different logic gate designs have been proposed and proof of concept...
conference paper 2023
Searched for: subject%253A%2522Transducers%2522
(1 - 20 of 88)

Pages