Searched for: subject%253A%2522conductivity%2522
(41 - 60 of 180)

Pages

document
Kumru, B. (author)
Solar irradiation provides critical energy to conduct chemical reactions. Many light-sensitive materials, such as semiconductors, guide photoredox-induced chemical pathways to tailor favored chemical conversions. Polymer synthesis by light is popular, however mainly addressed by conducting radical-based polymerization strategies. Oxidative...
journal article 2022
document
Akram, Naveed (author), Hosseini, M. (author), Sadri, Rad (author), Kazi, S.N. (author), Kasaeian, Alibakhsh (author), Yarmand, H. (author), Hooman, K. (author), Ahmad, Roslina (author)
In the present research, the synthesis of highly stable multiwalled carbon nanotubes in aqueous media is developed using a one-pot, covalent and green functionalization technique to improve the heat transfer and hydrodynamic behavior of a horizontal stainless-steel tube subjected to a uniform heat flow at its outer surface. Instead of using...
journal article 2022
document
Tijs, B.H.A.H. (author), Doldersum, M.H.J. (author), Turon, A. (author), Waleson, J. E.A. (author), Bisagni, C. (author)
The capability of joining two thermoplastic composite parts by welding is a key technology to reduce the weight and cost of assembled parts and enables high volume manufacturing of future aeronautical structures made of thermoplastic composite materials. However, there is not much experimental understanding of the mechanisms involving welded...
journal article 2022
document
Chen, Jing (author), Liu, X. (author), Zeng, Xiao Liang (author), Ye, Huai Yu (author), Zhang, Kouchi (author)
Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...
journal article 2022
document
Chaudhary, A. (author), Hos, Jan (author), Lossen, Jan (author), Huster, Frank (author), Kopecek, Radovan (author), van Swaaij, R.A.C.M.M. (author), Zeman, M. (author)
In this article, we investigate the passivation quality and electrical contact properties for samples with a 150 nm thick n+ polysilicon layer in comparison to samples with a phosphorus diffused layer. High level of passivation is achieved for the samples with n+ polysilicon layer and an interfacial oxide underneath it. The contact properties...
journal article 2022
document
van Wijk, J. M. (author), de Hoog, E. (author), Talmon, A.M. (author), van Rhee, C. (author)
The hydraulic transport of sediments in sediment–water multiphase mixtures is an important process in nature and many industrial applications. The flows are characterized by complex transient phenomena, in which the overall system scale and the particle scale are equally important. Experimental research into dense mixture flows is focused on...
journal article 2022
document
van der Cruijsen, J. (author), Dooren, R.F. (author), Schouten, A.C. (author), Oostendorp, Thom F. (author), Frens, Maarten A. (author), Ribbers, G.M. (author), van der Helm, F.C.T. (author), Kwakkel, Gert (author), Selles, R.W. (author)
Transcranial direct current stimulation (tDCS) is a promising tool to improve and speed up motor rehabilitation after stroke, but inconsistent clinical effects refrain tDCS from clinical implementation. Therefore, this study aimed to assess the need for individualized tDCS configurations in stroke, considering interindividual variability in...
journal article 2022
document
Gebert, J. (author), de Jong, T. (author), Meza Ramos, P.N. (author), Rees-White, T. (author), Beaven, R.P. (author), Lammen, J.K. (author)
Within the framework of the Dutch sustainable landfill project iDS, four compartments of the Dutch landfill Braambergen have been treated by in-situ aeration since 2017. The aeration infrastructure comprises 230 wells with a spacing of 15 to 20 m, distrib-uted over an area of around 10 ha, intercepting a waste body of 1.2 × 10<sup>6</sup> t...
journal article 2022
document
Bozali, B. (author), Ghodrat, Dr. Sepideh (author), Plaude, L. (author), van Dam, J.J.F. (author), Jansen, K.M.B. (author)
In recent years, knitted strain sensors have been developed that aim to achieve reliable sensing and high wearability, but they are associated with difficulties due to high hysteresis and low gauge factor (GF) values. This study investigated the electromechanical performance of the weft-knitted strain sensors with a systematic approach to...
journal article 2022
document
Han, C. (author), Santbergen, R. (author), van Duffelen, Max (author), Procel Moya, P.A. (author), Zhao, Y. (author), Yang, G. (author), Zhang, Xiaodan (author), Zeman, M. (author), Mazzarella, L. (author), Isabella, O. (author)
Reducing indium consumption, which is related to the transparent conductive oxide (TCO) use, is a key challenge for scaling up silicon heterojunction (SHJ) solar cell technology to terawatt level. In this work, we developed bifacial SHJ solar cells with reduced TCO thickness. We present three types of In<sub>2</sub>O<sub>3</sub>-based TCOs,...
journal article 2022
document
de Vrijer, T. (author), Miedema, Sander (author), Blackstone, Thijs (author), van Nijen, D.A. (author), Han, C. (author), Smets, A.H.M. (author)
A logical next step for achieving a cost price reduction per Watt peak of photovoltaics (PV) is multijunction PV devices. In two-terminal multijunction PV devices, the photo-current generated in each subcell should be matched. Intermediate reflective layers (IRLs) are widely employed in multijunction devices to increase reflection at the...
journal article 2022
document
Tuluk, A. (author), Brouwer, J.C. (author), van der Zwaag, S. (author)
BiFeO <sub>3</sub> is a multiferroic material with a perovskite structure that has a lot of potential for use in sensors and transducers. However, obtaining pure single-phase BiFeO <sub>3</sub> ceramic with a low electrical conductivity via solid-state reactions remains a problem that limits its application. In this work, the suppression of...
journal article 2022
document
Al-Khoury, Rafid (author), BniLam, Noori (author), Musivand Arzanfudi, M. (author), Saeid, S. (author)
This paper introduces an analytical model analyzing the effect of groundwater flow on heat transfer in an infinite conductive-convective porous domain representing shallow geothermal systems with arbitrarily configured cylindrical heat sources. The model is formulated based on the moving source concept and solved based on the spectral...
journal article 2021
document
Rietdijk, Wim (author), Renes, Sander (author)
Background: We examine the incidence of medical tribunal decisions and disciplinary actions (DAs) against healthcare professionals (HCPs). In addition, we studied whether an intimate relationship between an HCP and patient as part of the medical tribunal decision is associated with an increased likelihood of disciplinary actions. Methods: We...
journal article 2021
document
Quan, D. (author), Moloney, Peter (author), Carolan, Declan (author), Abourayana, Hisham (author), Ralph, Calvin (author), Ivankovic, Alojz (author), Dowling, Denis (author), Murphy, Neal (author)
This work studied the effects of adding short basalt fibers (BFs) and multi-walled carbon nanotubes (MWCNTs), both separately and in combination, on the mechanical properties, fracture toughness, and electrical conductivity of an epoxy polymer. The surfaces of the short BFs were either treated using a silane coupling agent or further...
journal article 2021
document
Celebi, A.T. (author), Vlugt, T.J.H. (author), Moultos, O. (author)
Accurate knowledge and control of thermal conductivities is central for the efficient design of heat storage and transfer devices working with deep eutectic solvents (DESs). The addition of water is a straightforward and cost-efficient way of tuning many properties of DESs. In this work, the thermal conductivities of aqueous solutions of...
journal article 2021
document
van der Cruijsen, J. (author), Piastra, Maria Carla (author), Selles, R.W. (author), Oostendorp, Thom F. (author)
The inconsistent response to transcranial electric stimulation in the stroke population is attributed to, among other factors, unknown effects of stroke lesion conductivity on stimulation strength at the targeted brain areas. Volume conduction models are promising tools to determine optimal stimulation settings. However, stroke lesion...
journal article 2021
document
Kraft, Marvin A. (author), Gronych, Lara M. (author), Famprikis, T. (author), Zeier, Wolfgang G. (author)
Exploration of sulfidic sodium solid electrolytes and their design contributes to advances in solid-state sodium batteries. Such a design is guided by a better understanding of fast sodium transport, for instance, in the herein studied Na11Sn2PS12-type materials. By using Rietveld refinements against synchrotron X-ray diffraction and...
journal article 2021
document
Rong, Jian (author), Zhu, Jia-Ning (author), Xiao, Wenlong (author), Zhao, Xinqing (author), Ma, Chaoli (author)
Thermal conductivity is a key parameter for high performance material needed for electronic devices. While most commercially used Mg foundry alloys exhibit low thermal conductivities. In this work, we developed an Mg–3RE–0.5Zn alloy that is suitable for high pressure die cast (HPDC) ultrathin wall cellphone components. The thermal...
journal article 2021
document
Tabakovic, A. (author), Mohan, Joseph (author), Karač, Aleksandar (author)
This paper explores the potential use of conductive alginate capsules encapsulating a bitumen rejuvenator as a new extrinsic self-healing asphalt method. The capsules combine two existing self-healing asphalt technologies: (1) rejuvenator encapsulation and (2) induction heating to create a self-healing system that will provide rapid and...
journal article 2021
Searched for: subject%253A%2522conductivity%2522
(41 - 60 of 180)

Pages