A study of stone arch bridge’s flood reliability through a surrogate model approach

Europe’s historic masonry arch bridges are culturally and economically significant, but their long-term safety must be ensured. Scour effects are the most common cause of collapse, so it is necessary to carry out structural assessments to mitigate the risk and prevent potential failures. In this study, a metamodel-based method was used to...

A CPT-based multi-spring model for lateral monopile analysis under SLS conditions in sand

Monopiles are the most common Offshore Wind Turbine (OWT) foundations due to their simplicity in design, fabrication, and installation. However, large new-generation turbines have led to significant changes in monopile dimensions, necessitating extensive finite element analyses and ground investigations to meet design requirements. While Cone...

Influence of vertical loading on behavior of laterally loaded foundation piles: A review

The majority of installed offshore wind turbines are supported on large-diameter, open-ended steel pile foundations, known as monopiles. These piles are subjected to vertical and lateral loads while in service. In current design practice, interaction of vertical and lateral loads are not considered, rather piles are designed to resist...

PISA design model for monopiles for offshore wind turbines: Application to a stiff glacial clay till

Offshore wind turbines in shallow coastal waters are typically supported on monopile foundations. Although three-dimensional (3D) finite-element methods are available for the design of monopiles in this context, much of the routine design work is currently conducted using simplified one-dimensional (1D) models based on the p-y method. The p-y...

Finite-element modelling of laterally loaded piles in a stiff glacial clay till at Cowden

The PISA project was a combined field testing/numerical modelling study with the aim of developing improved design procedures for large-diameter piles subjected to lateral loading. This paper describes the development of a three-dimensional finite-element model for the medium-scale pile tests that were conducted in Cowden till as part of the...

Ground characterisation for PISA pile testing and analysis

This paper is the first of a set of linked publications on the PISA Joint Industry Research Project, which was concerned with the development of improved design methods for monopile foundations in offshore wind applications. PISA involved large-scale pile tests in overconsolidated glacial till at Cowden, north-east England, and in dense,...

Monotonic laterally loaded pile testing in a stiff glacial clay till at Cowden

This paper describes the results obtained from a field testing campaign on laterally loaded monopiles conducted at Cowden, UK, where the soil consists principally of a heavily overconsolidated glacial till. These tests formed part of the PISA project on the development of improved design methods for monopile foundations for offshore wind...

Monotonic laterally loaded pile testing in a dense marine sand at Dunkirk

The results obtained from a field testing campaign on laterally loaded monopiles, conducted at a dense sand site in Dunkirk, northern France are described. These tests formed part of the PISA project on the development of improved design methods for monopile foundations for offshore wind turbines. Results obtained from monotonic loading tests...

Finite-element modelling of laterally loaded piles in a dense marine sand at Dunkirk

The paper presents the development of a three-dimensional finite-element model for pile tests in dense Dunkirk sand, conducted as part of the PISA project. The project was aimed at developing improved design methods for laterally loaded piles, as used in offshore wind turbine foundations. The importance of the consistent and integrated...

PISA design model for monopiles for offshore wind turbines: Application to a marine sand

This paper describes a one-dimensional (1D) computational model for the analysis and design of laterally loaded monopile foundations for offshore wind turbine applications. The model represents the monopile as an embedded beam and specially formulated functions, referred to as soil reaction curves, are employed to represent the various...

New data analysis methods for instrumented medium-scale monopile field tests

The PISA Joint Industry Research Project was concerned with the development of improved design methods for monopile foundations in offshore wind applications. PISA involved large-scale pile tests in overconsolidated glacial till at Cowden, north-east England, and in dense, normally consolidated marine sand at Dunkirk, northern France. This...

Experimental application of FRF-based model updating approach to estimate soil mass and stiffness mobilised under pile impact tests

The dynamic response of structures in contact with soil is receiving increasing interest and there is a growing need for more accurate models capable of simulating the behaviour of these systems. This is particularly important in the field of offshore wind turbines, where accurate estimates of system frequency are needed to avoid resonance, and...