A review of methods on buildability quantification of extrusion-based 3D concrete printing: From analytical modelling to numerical simulation

Herein, different kinds of methods for buildability quantification of 3D concrete printing are reviewed, including experimental approaches, analytical modelling, and numerical simulations. A brief introduction on printing process is first given. This discusses the material properties in different stages. Material printability, which...

An enhanced lattice beam element model for the numerical simulation of rate-dependent self-healing in cementitious materials

This paper describes the development of a discrete lattice model for simulating structures formed from self-healing cementitious materials. In particular, a new approach is presented for simulating time dependent mechanical healing in lattice elements. The proposed formulation is designed to simulate the transient damage and healing behaviour...

Nanowire-based integrated photonics for quantum information and quantum sensing

At the core of quantum photonic information processing and sensing, two major building pillars are single-photon emitters and single-photon detectors. In this review, we systematically summarize the working theory, material platform, fabrication process, and game-changing applications enabled by state-of-the-art quantum dots in nanowire...

Microstructure-informed deep convolutional neural network for predicting short-term creep modulus of cement paste

This study aims to provide an efficient alternative for predicting creep modulus of cement paste based on Deep Convolutional Neural Network (DCNN). First, a microscale lattice model for short-term creep is adopted to build a database that contains 18,920 samples. Then, 3 DCNNs with different consecutive convolutional layers are built to learn...

Combined Detection of Surface Changes and Deformation Anomalies Using Amplitude-Augmented Recursive InSAR Time Series

Synthetic aperture radar (SAR) missions with short repeat times enable opportunities for near real-time deformation monitoring. Traditional multitemporal interferometric SAR (MT-InSAR) is able to monitor long-term and periodic deformation with high precision by time-series analysis. However, as time series lengthen, it is time-consuming to...

Tracking traffic congestion and accidents using social media data: A case study of Shanghai

Traffic congestion and accidents take a toll on commuters' daily experiences and society. Locating the venues prone to congestion and accidents and capturing their perception by public members is invaluable for transport policy-makers. However, few previous methods consider user perception toward the accidents and congestion in finding and...

A Pitch-Matched Transceiver ASIC With Shared Hybrid Beamforming ADC for High-Frame-Rate 3-D Intracardiac Echocardiography

In this article, an application-specific integrated circuit (ASIC) for 3-D, high-frame-rate ultrasound imaging probes is presented. The design is the first to combine element-level, high-voltage (HV) transmitters and analog front-ends, subarray beamforming, and in-probe digitization in a scalable fashion for catheter-based probes. The...

A Pitch-Matched ASIC with Integrated 65V TX and Shared Hybrid Beamforming ADC for Catheter-Based High-Frame-Rate 3D Ultrasound Probes

Intra-cardiac echography (ICE) probes (Fig. 32.2.1) are widely used in electrophysiology for their good procedure guidance and relatively safe application. ASICs are increasingly employed in these miniature probes to enhance signal quality and reduce the number of connections needed in mm-diameter catheters [1]-[5]. 3D visualization in real...

Markov Modulated Process to Model Human Mobility

We introduce a Markov Modulated Process (MMP) to describe human mobility. We represent the mobility process as a time-varying graph, where a link specifies a connection between two nodes (humans) at any discrete time step. Each state of the Markov chain encodes a certain modification to the original graph. We show that our MMP model...

Process simulation development of a clean waste-to-energy conversion power plant: Thermodynamic and environmental assessment

Waste-to-energy (WTE) conversion technologies for generating renewable energy and solving the environmental problems have an important role in the development of sustainable circular economy. This paper presents a novel high-efficiency WTE power plant using refuse-derived fuel (RDF) as feedstock by integrating torrefaction (T) pretreatment...

Energy, exergy, and environmental analyses of renewable hydrogen production through plasma gasification of microalgal biomass

In this study, an energy, exergy, and environmental (3E) analyses of a plasma-assisted hydrogen production process from microalgae is investigated. Four different microalgal biomass fuels, namely, raw microalgae (RM) and three torrefied microalgal fuels (TM200, TM250, and TM300), are used as the feedstock for steam plasma gasification to...

Lattice Fracture Model for Concrete Fracture Revisited: Calibration and Validation

The lattice fracture model is a discrete model that can simulate the fracture process of cementitious materials. In this work, the Delft lattice fracture model is reviewed and utilized for fracture analysis. First, a systematic calibration procedure that relies on the combination of two uniaxial tensile tests is proposed to determine the input...

Lattice Model For Numerical Analysis Of Fracture Process Of Concrete Material Under Various Loading Conditions

The aim of this work is to investigate the fracture process of concrete under various boundary conditions. Although numerous concrete fracture tests have been reported, showing the failure behavior of concrete, their evaluation is ambiguous due to the limitations of specimen size and experimental conditions. Therefore, it is necessary to use...