- document
-
Jiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)Due to various advantages of Fibre-Reinforced Polymer (FRP) decks, the FRP to steel composite bridge system is being increasingly used in new bridge structures as well as rehabilitation projects for old bridges. This paper focuses on the mechanical behaviours and failure modes of the adhesively-bonded joins between FRP sandwich decks and steel...conference paper 2013
- document
-
Liu, X. (author), Tzimiris, G. (author), Li, J. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...conference paper 2015
- document
-
Akram, M. (author), Bhowmik, S. (author), Jansen, K. (author), Ernst, L.J. (author)Titanium is one of the most effective materials for structural application of space craft and aviation. Titanium alloys are widely used in solid rocket booster cases, guidance control pressure vessel and other different applications demanding light weight and reliability. Aerospace industry is also a larger market for titanium products and...conference paper 2010
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...conference paper 2013
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...conference paper 2012
- document
-
Liu, X. (author), Tzimiris, G. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...conference paper 2014
- document
-
Teixeira De Freitas, S. (author), Sinke, J. (author)The purpose of this research is to study the effect of temperature on the static behavior of an hybrid structure consisting of adhesively bonded Fiber Metal Laminate skin to a composite stiffener. This hybrid structure was tested using stiffener pull-off tests, which is a typical set-up used to simulate the structural behaviour of full-scale...conference paper 2015
- document
- Li, C. (author), Rans, C.D. (author), LaPlante, G. (author), Marsden, C. (author) conference paper 2015
- document
-
Papadakis, V. (author), Teixeira De Freitas, S. (author), Colijn, R.M. (author), Goedhart, J.J. (author), Poulis, J.A. (author), Groves, R.M. (author)The adhesion process of bonded structures is a very sensitive manufacturing process, namely to surface contaminations. Nowadays, the adhesion quality of bonded joints can only be detected by destructive testing such as peel tests. But, for actual structures destructive testing of every bonded part is obviously not an option and industry is...conference paper 2016
- document
-
Lavalette, N. (author), Bergsma, O.K. (author), Zarouchas, D. (author), Benedictus, R. (author)In the context of lightweight structure design for the transportation and robotics industries, new types of composite structures are being developed, in the form of trusses made of fiber-reinforced polymer composite members of small diameter. The main objective of this work is to study adhesive joints, bonding pultruded composite tubes inside...conference paper 2018
- document
-
Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)Measurement of the energy dissipation during fatigue crack growth is used as a technique to gain more insight into the physics of the crack growth process. It is shown that the amount of energy dissipation required per unit of crack growth is determined by Gmax, whereas the total amount of energy available for crack growth in a single cycle is...conference paper 2016
- document
-
Romijn, J. (author), Vollebregt, S. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author), Leijtens, Johan (author), Sarro, Pasqualina M (author)In this paper we present a sun position sensor platform with a scalable approach for the 3D integration of the sensor optics. This would facilitate the sun position sensor miniaturization, reduces fabrication cost and mitigates the need for sensor calibration. The sun position sensor platform is implemented in a seven mask BICMOS technology with...conference paper 2021
- document
-
Kupski, J.A. (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author), Benedictus, R. (author)The goal of this study is to investigate new designs of composite bonded joints in order to improve their strength under tensile loading. Multiple stacked overlaps are compared with single overlap designs. The concept of multiple stacking is well known as ply-interleaving technique for co-curing dissimilar materials. For a secondary bonding...conference paper 2019
- document
-
Wang, W. (author), Poulis, J.A. (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author)Adhesive bonding is a highly desirable joining technique to join composites to metals. The surfaces of both composite and metal substrates have to be carefully treated before bonding them together, in order to avoid interface failure between the adherend's surface and adhesive. This paper describes the surface pretreatments on carbon fiber...conference paper 2020
- document
-
Priesnitz, K. (author)For many joining applications, adhesive bonding is the favoured method. It provides the ability to join dissimilar materials such as metals and plastics. Adhesive bonds can be formed over large flange areas subsequently increasing the overall stiffness of the assembly. In some cases, however, the bonding process can lead to distortions, i.e....doctoral thesis 2015
- document
-
Akram, M. (author)Major industrial sectors like automotive, aerospace and others are increasingly using polymer composites in their structural parts. Polyimide sheet and adhesives, are high performance polymers. They are widely used in various engineering applications due to their excellent thermal, mechanical and chemical properties and their resistance to...doctoral thesis 2015
- document
-
Jiang, X. (author)During the last two decades, fiber-reinforced polymer (FRP) bridge decks have been increasingly used as a competitive alternative for wood, concrete and orthotropic steel decks, due to their various advantages: light-weight, good corrosion resistance, low maintenance cost and rapid installation for minimizing the traffic disturbing time. These...doctoral thesis 2013
- document
-
Abrahami, S.T. (author)For more than six decades, chromic acid anodizing (CAA) has been the central process in the surface pre-treatment of aluminium for adhesively bonded aircraft structures in Europe. Unfortunately, this electrolyte contains hexavalent chromium (Cr(VI)), a compound known for its toxicity and carcinogenic properties. The approaching ban on the use of...doctoral thesis 2016
- document
-
Kupski, J.A. (author)Adhesive bonding is one of the most suitable joining technologies in terms of weight and mechanical performance for current carbon fiber reinforced polymer aircraft fuselage structures. However, traditional joint topologies such as single overlap joints induce high peel stresses, resulting in sudden failure and low joint strength when compared...doctoral thesis 2020
- document
- Pascoe, J.A. (author) doctoral thesis 2016