Transonic Wing and Control Surface Loads Modelling for Aeroservoelastic Analysis

The exponential growth of the aviation sector combined with environmental and energy supply challenges have led companies to innovate to reduce aircraft fuel consumption. Among the many areas currently under research, this thesis investigates the possibility of making aircraft wings lighter thanks to flight load alleviation systems and more...

Unsteady Non-linear Control Surface Modelling for Aeroservoelastic Applications

In this paper, we present a data-driven method to model the unsteady non-linear response of aircraft control surfaces. This method relies on aerodynamic reduced-order models (ROM) derived from computational fluid dynamics with Reynolds averaged Navier-Stokes (CFD-RANS) analysis in the transonic domain. The ROM consists of a combination of look...

Transonic flight and movable load modelling for wing-box preliminary sizing

In this paper, a methodology is presented to size an aircraft wing-box accounting for steady and dynamic loads combined with active control. Several aerodynamic corrections are used and benchmarked to ensure a consistent level of fidelity during the load analysis. Reduced order models (ROM) of the aircraft movables, gust loads and maneuvers...

Effect of improved flight and control loads modelling on wing-box preliminary sizing

The proposed approach in this paper aims to bring the accuracy of CFD to quick linear aeroelastic simulations for structural sizing. This is achieved by deriving reduced-order models (ROM) of the aircraft movables, gust loads and manoeuvres loads from rigid CFD analysis and to use these as substitutes for the loads in the aeroelastic simulation....

Design and testing of a low subsonic wind tunnel gust generator

This paper summarises the design of a gust generator and the comparison between high fidelity numerical results and experimental results. The gust generator has been designed for a low subsonic wind tunnel in order to perform gust response experiments on wings and assess load alleviation. Special attention has been given to the different...

Investigation of the unsteady flow over a wing under gust excitation

A detailed performance investigation of the gust generator built for the Open Jet Facility wind tunnel at TU Delft is summarised in this paper. The influence of various parameters such as reduced frequency, measurement location, and excitation amplitude on the generated gust profile was quantified. In addition, unsteady lift measurements were...

Design and testing of a low subsonic wind tunnel gust generator

This paper summarises the design of a gust generator and the comparison between high fidelity numerical results and experimental results. The gust generator has been designed for a low subsonic wind tunnel in order to perform gust response experiments on wings and assess load alleviation. Special attention has been given to the different design...