Searched for: subject%3A%22Analytical%255C+model%22
(81 - 100 of 103)

Pages

document
Gonçalves, Romulo (author), Zlatanova, S. (author), Kyzirakos, Kostis (author), Nourian, Pirouz (author), Alvanaki, Foteini (author), van Hage, Willem (author)
3D digital city models form the basis for flow simulations (e.g. wind flow and water runoff), urban planning, underand over- ground formation analysis, and they are very important for automated anomaly detection on man made structures. They consist of large collections of semantically rich objects which have many properties such as material and...
conference paper 2016
document
Cai, H. (author), Toffolon, Marco (author), Savenije, Hubert (author)
An analytical model is used to investigate the resonant behavior in a semi-closed channel. The main integral quantities of the tidal wave are obtained by means of a linearized one-dimensional model as a function of three dimensionless parameters, representing cross-section convergence, friction and distance to the closed boundary. Arbitrary...
journal article 2016
document
Galanos, N. (author)
The concept of the More Electric Aircraft, where the majority of the aircraft’s secondary needs will be supplied by electrical power, is under continuous research over a number of years in order to conform the recent demand for more efficient and environmentally friendly aircrafts. Advancements in power electronics have contributed towards the...
master thesis 2015
document
Palaiogiannis, F. (author)
The impressive features, both in a design and technical aspect, of the Organic LED (OLED) lighting technology have attracted the interest of the research and commercial world and have recently be in the spotlight of the automotive industries, like the Lighting Department of Audi. Some of the most exciting features of these lights are the...
master thesis 2015
document
Hattangadi, N. (author)
In recent years, information technology (IT) has grown from an enabling technology to an important technology we depend on in our everyday lives. For example, IT is required for the proper functioning of personal devices that store our personal information, but is also present in the on-board computers in pacemakers and systems controlling...
master thesis 2015
document
Janic, M. (author)
This paper deals with the economic performances of supply chain(s) served by different including the mega freight transport vehicles. These performances are considered as a dimension of the supply chain’s sustainability together with the infrastructural, technical/technological, operational, environmental, and social performances. The supply...
conference paper 2014
document
Hoek, R.M. (author)
Since the 1980s, the modern single-lane roundabout has been applied in the Dutch road network. The roundabout offered major safety benefits compared to the conventional signalized intersection, however, it also required more space. Influenced by society’s growing mobility, the capacity requirements to intersections increased. This quest for...
master thesis 2013
document
Van Eekelen, S.J.M. (author), Bezuijen, A. (author), Van Tol, A.F. (author)
Most analytical models for the design of piled embankments or load transfer platforms with geosynthetic reinforcement (GR) include two calculation steps. Step 1 calculates the arching behaviour in the fill and step 2 the load-deflection behaviour of the GR. A calculation method for step 2 based on the results of model tests has been published by...
journal article 2013
document
Farajzadeh, R. (author), Meulenbroek, B.J. (author), Daniel, D. (author), Riaz, A. (author), Bruining, J. (author)
In this paper, we follow a similar procedure as proposed by Koval (SPE J 3(2):145–154, 1963) to analytically model CO2 transfer between the overriding carbon dioxide layer and the brine layer below it. We show that a very thin diffusive layer on top separates the interface from a gravitationally unstable convective flow layer below it. Flow in...
journal article 2013
document
Vu Xuan, H. (author)
In this thesis modeling, analysis, design and measurement of exterior rotor permanent magnet (PM) machines with concentrated windings are dealt with. Special attention is paid to slotting effect. The PM machine is integrated in flywheel and used for small-scale ship application. Analytical model and automated nonlinear transient finite-element...
doctoral thesis 2012
document
De Pater, P.D. (author)
The research objective of this thesis is to determine the new hydrodynamic and morphodynamic situation in case the Oosterschelde storm surge barrier is removed, with emphasis on the development of the intertidal area. To reach the objectives of this study a literature study is performed which describes the impact of the Deltaworks. An analytical...
master thesis 2012
document
Lawson, C.R. (author)
The paper details the role modelling (analytical, physical and numerical) has played in the development of design methods for basal reinforced piled embankments; specifically the level of embankment arching and the determination of the magnitude of the tensile loads in the basal reinforcement. The paper also reviews the major national design...
conference paper 2012
document
Jia, L. (author), d' Acunto, L. (author), Meulpolder, M. (author), Pouwelse, J.A. (author), Epema, D.H.J. (author)
Enhancing reciprocity has been one of the primary motivations for the design of incentive policies in BitTorrent-like P2P systems. Reciprocity implies that peers need to contribute their bandwidth to other peers if they want to receive bandwidth in return. However, the over-provisioning that characterizes today’s BitTorrent communities and the...
conference paper 2011
document
Jia, L. (author), Rahman, R (author), Vinko, T. (author), Pouwelse, J.A. (author), Epema, D.H.J. (author)
Many private BitTorrent communities employ Sharing Ratio Enforcement (SRE) schemes to incentivize users to contribute their upload resources. It has been demonstrated that communities that use SRE are greatly oversupplied, i.e., they have much higher seeder-to-leecher ratios than communities in which SRE is not employed. The first order effect...
conference paper 2011
document
Imoru, O. (author)
The principle of Inductive Power Transfer (IPT) is very old but it is rarely used for transferring power from source to load via a medium. This is because normally the medium restricts the power transfer due to losses or the shielding effects. However, for low energy applications, an acceptable amount of power could be transferred from the...
master thesis 2010
document
Ashuri, T. (author), Van Bussel, G.J.W. (author), Zaayer, M.B. (author), Van Kuik, G.A.M. (author)
A wind turbine blade has a complex shape and consists of different elements with dissimilar material properties. To do any aeroelastic simulation, the structural properties of the blade such as stiffnesses and mass per unit length should be known in advance, and extracting these properties is a difficult task. This paper presents an analytical...
conference paper 2010
document
Talmon, A.M. (author)
conference paper 2010
document
Abreu, R.F. (author), Gonzalez, A. (author), Zoeteweij, P. (author), Van Gemund, A.J.C. (author)
Preprint of paper published in: ENASE 2008 - Proceedings of the 3rd International Conference on Evaluation of Novel Approaches to Software Engineering, 4-7 May 2008 Fault screeners are simple software (or hardware) constructs that detect variable value errors based on unary invariant checking. In this paper we evaluate and compare the...
report 2008
document
Alles, J. (author), Mudde, R.F. (author)
Polychromatic x-ray beams traveling though material are prone to beam hardening, i.e., the high energy part of the incident spectrum gets over represented when traveling farther into the material. This study discusses the concept of a mean attenuation coefficient in a formal way. The total energy fluence is one-to-one related to the traveled...
journal article 2007
document
Holm, S.R. (author), Polinder, H. (author), Ferreira, J.A. (author)
journal article 2007
Searched for: subject%3A%22Analytical%255C+model%22
(81 - 100 of 103)

Pages