Searched for: subject%3A%22Behaviour%22
(1 - 20 of 303)

Pages

document
Haase, Louise Møller (author), Mugge, R. (author), Mosgaard, Mette Alberg (author), Bocken, Nancy (author), Jaeger-Erben, Melanie (author), Pizzol, Massimo (author), Jørgensen, Michael Søgaard (author)
Value preservation is key for the transition from a linear economy to a sufficiency-based circular economy. However, to keep the value of products and materials at the highest level possible over time, different actors such as businesses, designers, consumers, and policymakers must know when value is reduced during a product's lifetime, and how...
journal article 2024
document
Li, Qiang (author), Wang, Xinquan (author), Gavin, Kenneth (author), Jiang, Shengxiang (author), Diao, Hongguo (author), Wang, Mingyuan (author), Wang, Kangyu (author)
Scour leads to the loss of soil around monopile foundations for offshore wind turbines, which affects their structural safety. In this paper, the effect of scour on the lateral behaviour of monopiles was extensively investigated using finite element analysis, and calibration and comparison were undertaken using centrifuge tests. Piles with three...
journal article 2024
document
van Schaik, L. (author), Duives, D.C. (author), Hoogendoorn-Lanser, S. (author), Hoekstra, Jan Willem (author), Daamen, W. (author), Gavriilidou, A. (author), Krishnakumari, P.K. (author), Rinaldi, M. (author), Hoogendoorn, S.P. (author)
Physical distancing has been an important asset in limiting the SARS-CoV-2 virus spread during the COVID-19 pandemic. This study aims to assess compliance with physical distancing and to evaluate the combination of observed and self-reported data used. This research shows that it is difficult to operationalize new rules, that context affects...
journal article 2024
document
Cardinali, M. (author), Beenackers, Mariëlle A. (author), van Timmeren, A. (author), Pottgiesser, U. (author)
Introduction: Non-communicable diseases are the global disease burden of our time, with physical inactivity identified as one major risk factor. Green spaces are associated with increased physical activity of nearby residents. But there are still gaps in understanding which proximity and what characteristics of green spaces can trigger...
journal article 2024
document
Nijland, Timo G. (author), Lubelli, B. (author), van Zundert, Kim (author), van Hunen, Michiel (author)
The impregnation of the exterior surface of a masonry wall with a water repellent is a common intervention in (historic) building renovation and maintenance. Such treatments, whilst degrading at the surface with time under influence of ultra violet light, remain effective below the surface several decades after their application. During...
journal article 2024
document
State, Sabrina Patricia (author), Costovici, Stefania (author), Mousavi, M. (author), Gonzalez Garcia, Y. (author), Zanella, Caterina (author), Cojocaru, Anca (author), Anicai, Liana (author), Visan, Teodor (author), Enachescu, Marius (author)
In this work we present the pulsed current (PC) electrodeposition of Sn-Cu-Ni alloy as lead-free solder candidate, from choline chloride – ethylene glycol eutectic mixtures (1:2 molar ratio) onto copper metallic substrates. Electrolytes containing Sn<sup>2+</sup>, Cu<sup>2+</sup> and Ni<sup>2+</sup> salts in the selected deep eutectic solvent...
journal article 2024
document
De Haas, Mathijs (author), Ecke, Lisa (author), Chlond, Bastian (author), Hoogendoorn-Lanser, S. (author), Vortisch, Peter (author)
Longitudinal travel surveys are needed to capture individual travel behaviour changes. Only two longitudinal tavel surveys of national relevance are currently in operation, the German Mobility Panel (MOP) since 1994 and the Netherlands Mobility Panel (MPN) since 2013. This paper provides an overview of both panels' differences and...
journal article 2024
document
Onencan, A. M. (author), Ou, J. (author), de Koning, J.I.J.C. (author)
The Netherlands Climate Change Agreement aims to reduce CO<sub>2</sub> emissions and seismic events by halting natural gas usage by 2050. This will require widespread societal acceptance by 90% of households. The study investigates the social acceptance of a district heating network (DHN) among social housing tenants in Haarlem, Netherlands....
journal article 2024
document
Kaye, Sherrie Anne (author), Nandavar, Sonali (author), Lewis, Ioni (author), Blackman, Ross (author), Schramm, Amy (author), McDonald, Melinda (author), Oviedo-Trespalacios, O. (author), Haworth, Narelle (author)
The study applied the Theory of Planned Behaviour (TPB) to explore motorcycle riders’ underlying behavioural, normative, and control beliefs towards Advanced Rider Assistance Systems (ARAS). Each belief was explored in terms of three categories of technologies, (i) advanced technologies that help riders manage riding according to situations...
journal article 2024
document
Wallner, T.S. (author), Haslbeck, Jonas M.B. (author), Magnier, L.B.M. (author), Mugge, R. (author)
Refurbishment can extend the lifetime of an electronic product and reduce its environmental footprint. However, consumers often perceive refurbished electronics as less attractive than new ones, resulting in lower purchase intentions. While prior research has identified several factors that influence consumer choices regarding refurbished...
journal article 2024
document
Horvath, I. (author), Tepjit, Sirasak (author)
Application-specific reasoning mechanisms (ASRMs) development is a rapidly growing domain of systems engineering. A demonstrative implementation of an active recommender system (ARS) was realized to support designing ASRMs and to circumvent procedural obstacles by providing context-sensitive recommendations. The specific problem for the...
journal article 2024
document
Mendez-Morales, Mariela (author), Branco, Ricardo (author), Tankova, T. (author), Rebelo, Carlos (author)
Wire Arc Additive Manufacturing (WAAM) has gained popularity due to its speed and cost-effectiveness. However, the current knowledge on the cyclic deformation behaviour of WAAM materials is limited. To address this issue, this study investigates the cyclic deformation behaviour of WAAM ER70S-6 carbon steel. Coupons were extracted from printed...
journal article 2024
document
Visser, Mirjam (author), Schoormans, J.P.L. (author)
To reduce energy consumption of households, many appliances contain eco-settings, which when used, reduce energy consumption. However, the effectivity of the eco-settings in reducing energy consumption is hardly tested. Other design for sustainable behaviour strategies like coercion and feedback might be more effective. To test the...
journal article 2023
document
Yuan, Y. (author), Wang, X. (author), Calvert, S.C. (author), Happee, R. (author), Wang, M. (author)
Current driver behaviour models (DBMs) are primarily designed for the general driver population under specific scenarios, such as car following or lane changing. Hence DBMs capturing individual behaviour under various scenarios are lacking. This paper presents a novel method to quantify individual perceived driving risk in the longitudinal...
journal article 2023
document
Magnier, L.B.M. (author), Gil-Pérez, Ignacio (author)
This research investigates how consumers evaluate returnable packaging for fast-moving consumer goods. Through three online studies, we analysed how returnable packaging influences consumer behavioural intentions (intention to recommend and repurchase intention), overall attitudes and product perceptions (attitude towards the product,...
journal article 2023
document
Ponzoni, Elisa (author), Muraro, S. (author), Nocilla, Alessandra (author), Jommi, C. (author)
This study characterises the effects of naturally varying organic content on the compression and shear behaviour of a marine silty-clay from the Netherlands. Index properties and mechanical properties are determined through laboratory tests, including oedometer and multistage loading-unloading triaxial stress paths. The results indicate a...
journal article 2023
document
Mouri Sardar Abadi, P. (author), Baluch, Abrar H. (author), Sebaey, T. A. (author), Peeters, D.M.J. (author), Barzegar, M. (author), Lopes, C. S. (author)
This work aims to improve the flexural behaviour of unidirectional fibre-reinforced laminates by means of coupling an optimization procedure for quasi-isotropic configurations with the design space opened by dispersed-ply orientations. The design approach consists of finding suitable alternatives to traditional laminates (with fibre...
journal article 2023
document
Ni, Ying (author), Li, Y. (author), Yuan, Y. (author), Sun, Jian (author)
In recent years, the interest in riding in cities using the two-wheeler (e.g., bicycles, electric bicycles, electric mopeds, etc.) increases. Mixed-traffic road segments are one of the most common traffic scenes where the mixed two-wheeler flows exist. Because the movements are often not restricted by lanes, the two-wheeler uses lateral road...
journal article 2023
document
Tao, Y. (author), van Ham, M. (author), Petrović, A. (author), Ta, Na (author)
Research on the experienced utility of commuting time is dominated by an individualistic view of choice concerning the trade-offs between long commutes and job- or housing-related benefits. The widely discussed phenomenon of the commuting paradox shows that individuals systematically report worse subjective wellbeing as commuting time...
journal article 2023
document
Miao, X. (author), Magnier, L.B.M. (author), Mugge, R. (author)
Reusable packaging systems (RPSs) can significantly reduce single-use packaging waste. However, knowledge about consumers’ adoption of this kind of packaging is scarce. We adopted a qualitative approach using in-depth interviews with consumers (n = 27) who had actually used an RPS and follow-up phone interviews to capture consumer behaviour...
journal article 2023
Searched for: subject%3A%22Behaviour%22
(1 - 20 of 303)

Pages