Pages
- 1
- 2
- document
-
Yañez Diaz, Daniel (author)Hydrogen has emerged as a promising candidate for energy storage, offering an alternative to fossil fuels as a primary fuel source. It can be safely stored in a liquid organic hydrogen carrier (LOHC) and recovered upon demand through the reversible hydrogenation/dehydrogenation of the LOHC. Voyex, a technology-driven startup, is developing a...master thesis 2023
- document
-
de Vries, Irene (author)Polders water canals are sometimes exposed to brackish seepage from the nearby saline sea (salinization). This is a problem because the canal water is used to irrigate crops. A characteristic of water is that less dense (fresh) water floats on top of dense (saline) water. In lakes and oceans, it is common that water layers with various densities...master thesis 2023
- document
-
Hosseini, A. (author), Hage, Johannes (author), Meijer, Koen (author), Offerman, S.E. (author), Yang, Y. (author)In this paper a CFD analysis of HIsarna off-gas system for post combustion of CO-H2-carbon particle mixture is presented to evaluate the effect of different sub-models and parameters on the accuracy of predictions and simulation time. The effects of different mesh type, mesh grid size, radiation models, turbulent models, kinetic mechanism,...journal article 2023
- document
-
Daugulis, Edgars (author)An accurate estimation of gas turbine nozzle guide vane metal temperature locally on its surface is crucial for predicting vane lifetime. The stagnation region at the vane leading edge is, typically, exposed to the highest thermal load, thus, the showerhead configuration of film cooling is often applied on the leading edge. Widely used lean-...master thesis 2022
- document
-
Hosseini, A. (author), Dhiman, Vinod (author), Meijer, Koen (author), Zeilstra, Christiaan (author), Hage, Johannes (author), Peeters, Tim (author), Offerman, S.E. (author), Yang, Y. (author)A three-dimensional computational fluid dynamics (CFD) model for the HIsarna off-gas system is set up and validated by real plant data. In the model detailed reaction mechanism and kinetic data for post-combustion of CO-H2 mixture and carbon particles are incorporated. The results are presented and discussed in another study (Part 1) by the...journal article 2022
- document
- van Alderwegen, E. (author), Mosselman, E. (author), Zijlema, A. (author), Bahrami-Yarahmadi, M. (author), Reedijk, B (author) conference paper 2022
- document
- Ahrendt, S.M. (author), Blom, A. (author), van Denderen, R. Pepijn (author), Schielen, R.M.J. (author), Horner-Devine, Alexander (author) conference paper 2022
- document
-
Grolleman, Thomas (author)In the port of Ostend a discharge sluice is going to be constructed as part of an enforced dike ring. The proposed location of this discharge sluice is close to an already existing marina, the Royal Yachtclub Oostende (RYCO), and hindrance is expected regarding the outflow of the sluice in marina direction. When designing the sluice, an optimal...master thesis 2021
- document
-
van Put, Max (author)This study presents the numerical modeling of boundary layer flame flashback in premixed tube burners with turbulent flow and high hydrogen content. The modeling approach is based on a RANS turbulence model and a flamelet combustion model using a flame surface density approach in combination with multiple turbulent flame speed correlations to...master thesis 2021
- document
-
Aflaki, Ardalan (author), Esfandiari, Masoud (author), Mohammadi, S. (author)Natural ventilation has been used widely in buildings to deliver a healthy and comfortable indoor environment for occupants. It also reduces the consumption of energy in the built environment and dilutes the concentration of carbon dioxide. Various methods and techniques have been used to evaluate and predict indoor airspeed and patterns in...review 2021
- document
-
Vesper, J.E. (author), Obiji, Chibuikem S. (author), Westerwaal, Ruud (author), Boelsma, Christiaan (author), Kenjeres, S. (author), Kleijn, C.R. (author)In recent years, Physical Vapor Deposition has been advanced to a continuous process which makes it amenable for in-line, high-quality and energy-efficient galvanization. To achieve the high and uniform mass flow required for in-line production, a Vapor Distribution Box is used, in which the zinc is evaporated. The zinc fills the Vapor...journal article 2021
- document
-
Muhammad Rasyid Salam, Rasyid (author)The work presented in this report investigates the effect of replacing natural gas fuel in a radiant tube burner in an industrial furnace with hydrogen fuel. The flue gas is fully contained inside the radiant tube burner and does not come into contact with the iron products inside the furnace. The burner interacts with the process side of the...master thesis 2020
- document
-
Fidllan Nurkhoir, Fidllan Nurkhoir (author)The CFD modeling based on the two-fluid model (TFM) was used on studying the novel indirectly heated bubbling fluidized bed steam reformer (IHBFB-SR). This is a collaborative project between Petrogas and TU Delft for testing the advance’s reactor configuration, which indirectly supplies the heat via radiant burner on the center toward the...master thesis 2020
- document
-
Nonhebel, Jochem (author)Natural gas accounts for just under a quarter of global energy demand. The gas is mainly delivered through pipelines, but is increasingly shipped overseas by liquefying it to LNG at -162 degrees Celcius. Fluids, containing free surfaces inside ships are likely to start sloshing, as ships move on waves. These fluids induce impact loading on the...master thesis 2019
- document
-
Patil, Akshay (author)During the 2011 Great East Japan Tsunami, the world’s deepest breakwaters in Kamaishi and Ofunato, which had been designed to reduce tsunami damage, partially failed after over-topping. The failure was due to a combination of sliding, over-topping induced foundation scour and foundation bearing capacity failure. Hindcasting this failure required...student report 2018
- document
-
Nootebos, Bas (author)Ever since the late seventies great engineering effort has gone into increasing the fuel efficiency and reduction of the noise profile of aircraft. A concept that has been explored is the wingtip-mounted (pusher) propeller. In all wings energy is lost due to the lift-induced vortex at the wingtip. Wingtip-mounted pusher propellers can recover...master thesis 2018
- document
-
Stevens, Thieu (author)In this thesis, it is studied if the stability of a stone in a granular bed protection, can be predicted by the local output of a three-dimensional (3D) eddy resolving simulation technique.<br/><br/>In earlier studies regarding stone stability, Reynolds-Averaged Navier-Stokes (RANS) models are used to determine the loads on the bed. In the...master thesis 2018
- document
-
Hilgersom, K.P. (author), Zijlema, Marcel (author), van de Giesen, N.C. (author)The three-dimensional (3-D) modelling of water systems involving double-diffusive processes is challenging due to the large computation times required to solve the flow and transport of constituents. In 3-D systems that approach axisymmetry around a central location, computation times can be reduced by applying a 2-D axisymmetric model set-up....journal article 2018
- document
-
Chit Yan Toe, Chit (author)In this research two problem statements are defined, namely (1) the validity of the assumption that groynes and weirs are equivalent in hydraulic models, and (2) the difficulty of modelling groynes and weirs in the 3D numerical solver package OpenFOAM. Using the incompressible 3D Navier-Stokes equations solver for multiphase phase flows, the so...master thesis 2018
- document
-
van Loon, Orin (author)This study treats the calculation of longitudinal forces on a ship in a lock chamber due to the levelling procedure. The focus will be on the force resulting from the filling jet through the levelling door in the lock, with the main point of interest being the interaction between the ship and the flow resulting from the jet. To understand more...master thesis 2017
Pages
- 1
- 2