Pages
- 1
- 2
- document
-
Zhu, Xuezhen (author), Zhang, Minghu (author), Shi, Jinyan (author), Weng, Yiwei (author), Yalçınkaya, Çağlar (author), Šavija, B. (author)High-strength engineered cementitious composites (ECC) typically require higher cement content, which is negative from the sustainability point of view. To alleviate this problem, herein a low-cost and eco-friendly high-strength ECC (with a compressive strength of over 100 MPa) was developed, and diatomite was used to replace a small amount...journal article 2024
- document
-
Lv, Leyang (author), Zhang, Xiangyu (author), Šavija, B. (author), Zhang, Mingzhong (author), Han, Kaihang (author), Zhang, Honghzhi (author), Pei, Chun (author), Zhu, Jihua (author), Xing, Feng (author)Self-healing concrete using encapsulated healing agent has shown great potential in enhancing concrete durability. However, the capsules are expensive to make and can lower the mechanical properties of concrete. In this study, a new type of manufactured aggregate that employs waste-derived fly ash cenosphere as a carrier of healing agent (SH...journal article 2024
- document
-
Tawfek, Abdullah M. (author), Ge, Zhi (author), Yuan, Huaqiang (author), Zhang, Ning (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Guan, Yanhua (author), Šavija, B. (author)The mechanical performance of engineered cementitious composite (ECC) depends greatly on fiber orientation and distribution. In this paper, the effect of fiber orientation on ECC's mechanical properties was investigated using two different casting methods: a flow-induced casting was used to enhance the fiber orientation within ECC mixture and...journal article 2023
- document
-
Portero, Vincent (author), Deng, Shanliang (author), Boink, Gerard J.J. (author), Zhang, Kouchi (author), de Vries, Antoine (author), Pijnappels, Daniël A. (author)Atrial fibrillation (AF) is the most prevalent cardiac arrhythmia, progressive in nature, and known to have a negative impact on mortality, morbidity, and quality of life. Patients requiring acute termination of AF to restore sinus rhythm are subjected to electrical cardioversion, which requires sedation and therefore hospitalization due to...review 2023
- document
-
Wang, Chuan (author), Sun, Renjuan (author), Hu, Xinlei (author), Guan, Yanhua (author), Yang, Yingzi (author), Lu, Wei (author), Tian, Jun (author), Zhang, Hongzhi (author), Ge, Zhi (author), Šavija, B. (author)This paper presents a research on the chloride penetration behavior of engineered cementitious composites (ECC) under sustained flexural loads. Three load levels, i.e. 30 %, 60 % and 75 % of the ultimate flexural load were used. Chloride diffusion depth and concentration profile were measured 30, 60 and 150 days after the specimen was exposed...journal article 2023
- document
-
Bao, Hesheng (author), Han, Jinlin (author), Zhang, Yan (author), Di Matteo, Andrea (author), Roekaerts, D.J.E.M. (author), Van Oijen, Jeroen (author), Somers, Bart (author)In the current work, the Flamelet Generated Manifold (FGM) method is applied with large-eddy simulation (LES) to investigate the effect of methane on dual-fuel (DF) spray ignition. The diesel surrogate n-dodecane is injected as the so-called pilot fuel into selected lean methane–air mixtures, ranging from ϕ<sub>CH<sub>4</sub></sub>=0 to ϕ<sub...journal article 2023
- document
-
Tawfek, Abdullah M. (author), Ge, Zhi (author), Li, Jian (author), Zhang, Kangkang (author), Jiang, Nengdong (author), Shao, Yingxuan (author), Ling, Yifeng (author), Šavija, B. (author)An engineered cementitious composite (ECC) belongs to a type of high-performance fiber-reinforced materials. Fiber alignment causes the anisotropy of such materials. Herein, the influence of the fiber orientation on water and ion penetration into an ECC was studied. Fiber alignment was achieved using an extrusion approach. Water absorption,...journal article 2023
- document
-
Li, Yonghao (author), Zhang, Ning (author), Sun, Renjuan (author), Guan, Yanhua (author), Liu, Lemin (author), Tian, Changjin (author), Ling, Yifeng (author), Zhang, Hongzhi (author), Šavija, B. (author)The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end,...journal article 2023
- document
-
Gomez de Santos, Patricia (author), González-Benjumea, Alejandro (author), Fernandez-Garcia, Angela (author), Aranda, Carmen (author), Wu, Y. (author), But, A. (author), Molina-Espeja, Patricia (author), Zhang, W. (author), Hollmann, F. (author)The hydroxylation of fatty acids is an appealing reaction in synthetic chemistry, although the lack of selective catalysts hampers its industrial implementation. In this study, we have engineered a highly regioselective fungal peroxygenase for the ω-1 hydroxylation of fatty acids with quenched stepwise over-oxidation. One single mutation near...journal article 2023
- document
-
Sattari, R. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author)This study presents a novel manufacturing process and design towards an enhanced sensitivity of an in-package relative humidity sensor. The device comprises multi-width interdigital electrodes which make oxide pillars appear during wet chemical etching in the fabrication process. Those oxide pillars appear only in wider areas while completely...conference paper 2023
- document
-
Xie, Mingjing (author), Qiu, Yangzi (author), Liang, Yishuang (author), Zhou, Yuekuan (author), Liu, Zhengxuan (author), Zhang, Guoqiang (author)The application of building information modeling (BIM) technology has effectively supported the high-quality development of building sustainability and informatization in China. However, few studies comprehensively analyzed the enacted policies, prevalent applications, and existing barriers of the latest application and development of BIM...review 2022
- document
-
Zhang, J. (author)Cracks, which could nucleate and propagate in engineering structures, could have an adverse effect on mechanical performance and even lead to catastrophic failure. Thus, it is critical to investigate structural behavior under fracture, which requires an appropriate modeling methodology for fracture analysis. Furthermore, designing structures...doctoral thesis 2022
- document
-
Zhang, Z. (author), Wu, Chenming (author), Dai, C. (author), Shi, Qingqing (author), Fang, G. (author), Xie, Dongfang (author), Zhao, Xiangjie (author), Liu, Yong Jin (author), Wang, C.C. (author), Wang, Xiu Jie (author)Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces...journal article 2022
- document
-
Wu, Bin (author), Hedayati, R. (author), Li, Zhehua (author), Aghajanpour, Mahsa (author), Zhang, Guichang (author), Zhang, Junhong (author), Lin, Jiewei (author)Bird strikes are one major accident for aircraft engines and can inflict heavy casualties and economic losses. In this study, a smoothed particle hydrodynamics (SPH) mallard model has been used to simulate bird impact to rotary aero-engine fan blades. The simulations were performed using the finite element method (FEM) at LS-DYNA. The...journal article 2022
- document
-
Zhang, J. (author), Zhebel, E.V. (author), van den Boom, S.J. (author), Liu, D. (author), Aragon, A.M. (author)In this work, an object-oriented geometric engine is proposed to solve problems with discontinuities, for instance, material interfaces and cracks, by means of unfitted, immersed, or enriched finite element methods (FEMs). Both explicit and implicit representations, such as geometric entities and level sets, are introduced to describe...journal article 2022
- document
-
Zhang, Hongzhi (author), Shao, Yingxuan (author), Zhang, Ning (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Sun, Renjuan (author), Tian, Changjin (author), Šavija, B. (author)Engineered cementitious composites (ECCs) belong to a broad class of fibre-reinforced concrete. They incorporate synthetic polyvinyl alcohol (PVA) fibres, cement, fly ash and fine aggregates, and are designed to have a tensile strain capacity typically beyond 3%. This paper presents an investigation on the carbonation behaviour of engineered...journal article 2022
- document
-
Zhang, X. (author), Valle Torre, M. (author), Specht, M.M. (author)Our life is surrounded by digital devices. Engineering education is one of the cornerstones in higher education for future generations and computational thinking (CT) is deemed as a core component in various engineering curricula. The Delft University of Technology (TU Delft), is the largest technical university in the Netherlands and computing;...conference paper 2022
- document
-
Zhang, Qiang (author), Zhang, X. (author), Xu, Lei (author)Modelling slab track-bridge interaction subject to a moving train usually involves solving complex high-dimensional matrix equations which is time-consuming. This research works to optimize the auto-assembling process in the slab track-bridge coupling matrices formulation and improve the computational efficiency by truncating the dynamic...journal article 2022
- document
-
Sun, Renjuan (author), Lu, Wei (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Hu, Xinlei (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)The resistance of cracked ECC against chloride ingress is mainly governed by the accumulated crack width of all the cracks rather than the maximum width of multiple cracks. However, most studies focus on the influence of a single fine crackjournal article 2022
- document
-
Sun, Renjuan (author), Han, Lebing (author), Zhang, Hongzhi (author), Ge, Zhi (author), Guan, Yanhua (author), Ling, Yifeng (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a study on cracking characterization of engineered cementitious composites (ECC) under flexural cyclic load using digital image correlation (DIC) technique. Five stress levels, namely 0.65, 0.75, 0.8, 0.85 and 0.9 of the flexural strength, were applied. Strain map at the side surface was obtained by DIC and used to drive...journal article 2022
Pages
- 1
- 2