Searched for: subject%3A%22Inductors%22
(1 - 20 of 33)

Pages

document
Marangalu, Milad Ghavipanjeh (author), Kurdkandi, Naser Vosoughi (author), Monfared, Kourosh Khalaj (author), Talebian, Iman (author), Neyshabouri, Yousef (author), Vahedi, H (author)
Switched capacitor multilevel inverter topologies are attractive among industrial power electronics researchers due to their applicability in sustainable energy systems such as renewable energy source (RES) applications. In this paper, a new switched capacitor (SC)-based grid-tied seven-level inverter is proposed for renewable energy sources ...
journal article 2024
document
Yue, X. (author), Javvaji, L.S. (author), Tang, Z. (author), Makinwa, K.A.A. (author), Du, S. (author)
Bias-flip rectifiers are commonly employed for piezoelectric energy harvesting (PEH). This article proposes a synchronized switch harvesting on an inductor (SSHI) rectifier with a duty-cycle-based (DCB) maximum power point tracking (MPPT) algorithm. The proposed DCB MPPT algorithm is based on the mathematically derived relation between the...
journal article 2024
document
Chakravarty, Saurabh (author)
Photovoltaic (PV) modules have considerable difficulty when exposed to shading since even partial blockages can significantly reduce energy production. To make the PV module shade-resilience, sub-module maximum power point tracking(MPPT) can be done for each string in the module. One way of doing it is by using converters at the sub-module level...
master thesis 2023
document
Li, Zhen (author), Chen, Zhiyuan (author), Wang, Jing (author), Wang, Jiawei (author), Jiang, Junmin (author), Du, S. (author), Cheng, Xu (author), Zeng, Xiaoyang (author), Han, Jun (author)
This article presents a piezoelectric energy harvesting (PEH) interface circuit using a new self-bias-flip with the charge recycle (SBFR) technique without employing any additional energy reservoir. Traditional designs, including synchronous-switch harvesting on inductor (SSHI), synchronous-switch harvesting on capacitor (SSHC), synchronous...
journal article 2023
document
Concha, Esteban (author), Rivera, Sebastian (author), Dekka, Apparao (author), Lizana F., Ricardo (author)
Modular multilevel series-parallel converters (MM-SPC) have become a suitable solution to provide higher operating voltages, fault tolerance operation, and reliability at a reduced cost, due to their ability to achieve a simpler internal voltage balance. Therefore, MMSPC is a promising solution for applications where the nominal operating...
conference paper 2023
document
Yue, X. (author), Du, S. (author)
In the past decades, inductor-based synchronized switch harvesting on inductor (SSHI) rectifiers have been widely employed in many active rectification systems for piezoelectric energy harvesting. Although SSHI rectifiers achieve high energy extraction performance compared to passive full-bridge rectifier (FBR), the performance greatly...
journal article 2023
document
Voorn, Jim (author)
With the integration of solar panels in urban areas, where shading is a common issue, it is desired to realize more shade-resilient designs. A DC-DC boost converter is an electronic device that can be used for maximum power point tracking (MPPT). When implementing MPPT at sub-module level, the shade resilience of the module can be increased....
master thesis 2022
document
Heidary, Amir (author), Yazdani-Asrami, Mohammad (author), Hesami, Morteza (author), Sood, Vijay (author)
Utilizing superconducting technology in fault current limiters for power grid applications is a practical solution to achieve a more modern and efficient power system. This is due to their low-loss profile, high efficiency, and ability to transmit about 5x more power in the same footprint compared to conventional counterparts. In addition,...
journal article 2022
document
Barzgari, Mohammad (author), Ghafari, A. (author), Meghdadi, Masoud (author), Medi, Ali (author)
This article presents the theory and implementation of a quadrature and differential RF front-end receiver. Combining balun, low-noise amplifier (LNA), mixer, and oscillator in a single stage, the proposed circuit, named the Blixator, is well suited for low-power applications. The baseband's transimpedance amplifier (TIA) also shares part of...
journal article 2022
document
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Zhu, G. (author), Yao, Y. (author), Bauer, P. (author)
This article introduces a three-mode variable-frequency zero-voltage switching (ZVS) modulation method for the four-switch buck+boost converter. This method makes this circuit concept well suited for applications, such as wireless power charging of electric vehicles, where this circuit operates as a power buffer between the resonant converter...
journal article 2022
document
Liu, Zhou (author), Mirhosseini, S.S. (author), Liu, L. (author), Popov, M. (author), Ma, Kaiqi (author), Hu, Weihao (author), Jamali, Sadegh (author), Palensky, P. (author), Chen, Zhe (author)
To promote the integration of renewable energy resources into modern energy systems, high-voltage dc (HVdc) and circuit breaker (CB) technologies have become critical to achieving secure and efficient energy transmission. This article reviews the technical development of the related areas, compares diverse breaker concepts and topologies,...
journal article 2022
document
Chen, Y. (author), Gong, J. (author), Staszewski, R.B. (author), Babaie, M. (author)
In this article, we present a 4.5-5.1-GHz fractional-N digitally intensive phase-locked loop (DPLL) capable of maintaining its performance in face of a large supply ripple, thus enabling a direct connection to a switched-mode dc-dc converter. Supply pushing of its inductor-capacitor (LC) oscillator is suppressed by properly replicating the...
journal article 2022
document
Chourzamanis, Andreas (author)
Renewable energy sources and in particular solar energy represent our mean to mitigate global warming and reduce the dependency from fossil fuel. Also, photovoltaic panels allow for production of clean energy anywhere, also in the urban environment where, unfortunately, non-ideal working conditions such as partial shading happen often and can...
master thesis 2021
document
Beikmirza, M.R. (author), Shen, Y. (author), de Vreede, L.C.N. (author), Alavi, S.M. (author)
We present a wideband, 12-bit four-way Doherty Cartesian digital transmitter (DTX) featuring an innovative 50%-LO signed I/Q interleaved up-conversion technique that enables close to perfect orthogonal I/Q summation. The DTX incorporates a compact four-way lumped-element Doherty power combining network to enhance its average efficiency at...
journal article 2021
document
Yu, G. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
In a wireless charging system, a back-end DC/DC converter can be used after the coil rectification stage to match the battery charging requirements and to optimize the resonant converter operation. In this paper, a synchronous boost converter is selected according to suggested coil parameters from SAE J2954 standards on a WPT1 3.7 kW power class...
conference paper 2021
document
Li, Chao Chieh (author), Yuan, Min Shueh (author), Liao, Chia Chun (author), Chang, Chih Hsien (author), Lin, Yu Tso (author), Tsai, Tsung Hsien (author), Huang, Tien Chien (author), Liao, Hsien Yuan (author), Staszewski, R.B. (author)
In this article, we introduce a fractional-N all-digital phase-locked loop (ADPLL) architecture based on a single LC-tank, featuring an ultra-wide tuning range (TR) and optimized for ultra-low area in 10-nm FinFET CMOS. Underpinned by excellent switches in the FinFET technology, a high turn-on/off capacitance ratio of LC-tank switched...
journal article 2021
document
Patra, B (author), Mehrpoo, M. (author), Ruffino, A. (author), Sebastiano, F. (author), Charbon-Iwasaki-Charbon, E. (author), Babaie, M. (author)
This paper presents the characterization and modeling of microwave passive components in TSMC 40-nm bulk CMOS, including metal-oxide-metal (MoM) capacitors, transformers, and resonators, at deep cryogenic temperatures (4.2 K). To extract the parameters of the passive components, the pad parasitics were de-embedded from the test structures using...
journal article 2020
document
Bhati, Dhruv (author)
The DC-Link capacitor of tractive inverters is designed to meet the Voltage Ripple requirement set by the manufacturer. The State-of-the-art capacitor design takes into account the minimum most capacitance required for the power rating to achieve the required voltage ripple and to ensure minimum power losses. This master’s work is based on the...
master thesis 2019
document
Khalilnezhad, H. (author), Popov, M. (author), van der Sluis, L. (author), Bos, Jorrit A. (author), de Jong, Jan P.W. (author), Ametani, Akihiro (author)
Zero-missing is a phenomenon in shunt compensated cable systems in which the current through the line breaker does not cross the zero point for several cycles. This paper deals with a thorough investigation on countermeasures of the zero-missing phenomenon in transmission systems and determines the requirements, benefits, and risks of...
journal article 2018
document
Ronchini Ximenes, A. (author), Vlachogiannakis, G. (author), Staszewski, R.B. (author)
In this paper, we apply various area reduction techniques on an inductor–capacitor (LC)-tank oscillator in order to make its size comparable to that of ring oscillators (ROs), while still retaining its salient features of excellent phase noise and low sensitivity to supply variations. The resulting oscillator employs a proposed ultracompact...
journal article 2017
Searched for: subject%3A%22Inductors%22
(1 - 20 of 33)

Pages