A Control Method for Converter-interfaced Sources to Improve Operation of Directional Protection Elements

The traditional fault control strategy of converter-interfaced renewable energy sources (CIRESs) may bring about a lower sensitivity level or misoperation of fault component-based directional elements. To overcome this problem, a new control scheme is proposed to adjust sequence impedance angles of CIRESs by computing suitable current...

Rank classification method for cascade reservoirs considering scale, benefits, and risk consequences

Cascade reservoirs are essential in water resource utilization, flood control, and disaster mitigation. They have been built in several rivers worldwide. The rank classification for cascade reservoirs has significant practical implications for resource distribution decisions and risk management strategies and is also essential for ensuring the...

High-Performance Flexible Strain Sensor Fabricated Using Laser Transmission Pyrolysis

In recent years, metal crack-based stretchable flexible strain sensors have attracted significant attention in wearable device applications due to their extremely high sensitivity. However, the tradeoff between sensitivity and detection range has been an intractable dilemma, severely limiting their practical applications. Herein, we propose a...

Risk consequence assessment of dam breach in cascade reservoirs considering risk transmission and superposition

Compared with a single reservoir, the risk in cascade reservoirs has the transmission and superposition effect, which increases the complexity of its risk consequence assessment. In view of this problem, the direct consequence (DC) and potential consequence (PC) were defined as two parts of the dam breach risk consequence of cascade reservoirs....

Calculation of dam risk probability of cascade reservoirs considering risk transmission and superposition

Because of the risk transmission and superposition among dams in cascade reservoirs, the analysis and probability calculation of dam risk become more complex compared with a single reservoir. By analyzing the main risk sources and actionmechanisms, the disaster-causing factors, disaster-transmitting body and disaster-bearing body in the cascade...

Ventilation regimes of school classrooms against airborne transmission of infectious respiratory droplets: A review

Airborne transmission of small respiratory droplets (i.e., aerosols) is one of the dominant transmission routes of pathogens of several contagious respiratory diseases, which mainly takes place between occupants when sharing indoor spaces. The important role of ventilation in airborne infection control has been extensively discussed in...

Risk assessment methods of cascade reservoir dams: a review and reflection

Risk assessment of cascade reservoir dams is not only the key to ensure the safety of the basin, but also the objective requirement of dam risk management. Based on the development status of cascade reservoirs in China, the complexity of dam risk management of cascade reservoirs compared with a single reservoir was analyzed. By reviewing the...

The effect of a mobile HEPA filter system on ‘infectious’ aerosols, sound and air velocity in the SenseLab

High efficiency air filtration has been suggested to reduce airborne transmission of ‘infectious’ aerosols. In this study the ‘air cleaning’ effect as well as the effect on sound and air velocity (draught risk) of a mobile High-Efficiency Particulate Air (HEPA) filter system was tested for different settings and positions in the Experience room...

Low Leakage and High Forward Current Density Quasi-Vertical GaN Schottky Barrier Diode With Post-Mesa Nitridation

In this brief, a high-performance quasi-vertical GaN Schottky barrier diode (SBD) on sapphire substrate with post-mesa nitridation process is reported, featuring a low damaged sidewall with extremely low leakage current. The fabricated SBD with a drift layer of 1 μm has achieved a very high ON/OFF current ratio (Iscriptscriptstyle ON...

Microstructure, precipitate and property evolution in cold-rolled Ti-V high strength low alloy steel

A cold-rolled Ti-V high strength low alloy (HSLA) steel was isothermally annealed at 650 °C and 700 °C for different times. A unique combination of techniques including visible light microscopy (VLM), transmission electron microscopy (TEM), matrix dissolution, small angle neutron scattering (SANS) and hardness measurement has been employed to...

Hydrodynamic performance of a multi-Oscillating Water Column (OWC) platform

A rectangular barge consisting of multiple oscillating water columns (OWCs) is considered in this paper, hereinafter referred to as a multi–OWC platform. Each OWC chamber is enclosed by two partially submerged vertical walls and the deck of the platform. An incident wave produces oscillation of the water column in each OWC chamber and hence air...