Searched for: subject%3A%22batteries%22
(21 - 40 of 42)

Pages

document
Yu, G. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
In a wireless charging system, a back-end DC/DC converter can be used after the coil rectification stage to match the battery charging requirements and to optimize the resonant converter operation. In this paper, a synchronous boost converter is selected according to suggested coil parameters from SAE J2954 standards on a WPT1 3.7 kW power class...
conference paper 2021
document
Koolman, George (author), Stecca, M. (author), Bauer, P. (author)
The high pulsating demand of fast charging stations (FCS) may cause monthly demand charges to account for a significant fraction of a station's electric bill. To reduce these costs, demand charge management can be applied to suppress peak power demands at FCSs, also using battery energy storage systems (BESS). This paper proposes a multi...
conference paper 2021
document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), van Duijsen, P.J. (author), Bauer, P. (author)
In high-power wireless battery charging that uses inductive power transfer, a considerable amount of power losses are located in the transmitter and receiver coils because they carry high resonant currents and typically have a loose coupling between them which increases eddy current losses. Therefore, the nominal operation needs to be chosen...
conference paper 2020
document
Vermeer, W.W.M. (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
This paper proposes a two-stage smart charging algorithm for future buildings equipped with an electric vehicle, battery energy storage, solar panels, and a heat pump. The first stage is a non-linear programming model that optimizes the charging of electric vehicles and battery energy storage based on a prediction of photovoltaïc (PV) power,...
journal article 2020
document
Stecca, M. (author), Soeiro, Thiago B. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author), Palensky, P. (author)
This paper discusses a qualitative comparison between Two and Three-Level Voltage Source Converter (VSC) topologies for battery energy storage applications. Three-Level Neutral Point Clamped (NPC) and T-Type circuit topologies are benchmarked versus the state-of-art Two-Level VSC in terms of efficiency and power density considering a 100 kW...
conference paper 2020
document
Chandra Mouli, G.R. (author), van Duijsen, P.J. (author), Grazian, F. (author), Jamodkar, Ajay (author), Bauer, P. (author), Isabella, O. (author)
If electric vehicles have to be truly sustainable, it is essential to charge them from sustainable sources of electricity, such as solar or wind energy. In this paper, the design of solar powered e-bike charging station that provides AC, DC and wireless charging of e-bikes is investigated. The charging station has integrated battery storage...
journal article 2020
document
Bandyopadhyay, S. (author), Chandra Mouli, G.R. (author), Qin, Z. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
Microgrid with integrated photo-voltaics (PV) and battery storage system (BSS) is a promising technology for future residential applications. Optimally sizing the PV system and BSS can maximise self-sufficiency, grid relief, and at the same time can be cost-effective by exploiting tariff incentives. To that end, this paper presents a...
journal article 2019
document
Narayan, N.S. (author), Chamseddine, Ali (author), Vega Garita, V.E. (author), Qin, Z. (author), Popovic, J. (author), Bauer, P. (author), Zeman, M. (author)
Off-grid solar home systems (SHSs) currently constitute a major source of providing basic electricity needs in un(der)-electrified regions of the world, with around 73 million households having benefited from off-grid solar solutions by 2017. However, in and of itself, state-of-the-art SHSs can only provide electricity access with adequate...
journal article 2019
document
Narayan, N.S. (author), Chamseddine, Ali (author), Vega Garita, V.E. (author), Qin, Z. (author), Popovic, J. (author), Bauer, P. (author), Zeman, M. (author)
With almost 1.1 billion people lacking access to electricity, solar-based off-grid products like Solar Home Systems (SHS) have become a promising solution to provide basic electricity needs in un(der)-electrified regions. Therefore, optimal system sizing is a vital task as both oversizing and undersizing a system can be detrimental to system...
journal article 2019
document
Vega Garita, V.E. (author), Hanif, Ali (author), Narayan, N.S. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
The use of batteries is indispensable in stand-alone photovoltaic (PV) systems, and the physical integration of a battery pack and a PV panel in one device enables this concept while easing the installation and system scaling. However, the influence of high temperatures is one of the main challenges of placing a solar panel close to a battery...
journal article 2019
document
Vega Garita, V.E. (author), Faizal Sofyan, Muhammad (author), Narayan, N.S. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
Given the complementary nature of photovoltaic (PV) generation and energy storage, the combination of a solar panel and a battery pack in one single device is proposed. To realize this concept, the PV Battery-Integrated Module (PBIM), it is fundamental to analyze the system architecture and energy management. This paper focuses on selecting a...
journal article 2018
document
Narayan, N.S. (author), Papakosta, Thekla (author), Vega Garita, V.E. (author), Qin, Z. (author), Popovic, J. (author), Bauer, P. (author), Zeman, M. (author)
The rapid increase in the adoption of Solar Home Systems (SHS) in recent times hopes to ameliorate the global problem of energy poverty. The battery is a vital but usually the most expensive part of an SHS; owing to the least lifetime among other SHS components, it is also the first to fail. Estimating battery lifetime is a critical task for...
journal article 2018
document
Vega Garita, V.E. (author), Ramirez Elizondo, L.M. (author), Narayan, N.S. (author), Bauer, P. (author)
Due to the variable nature of the photovoltaic generation, energy storage is imperative, and the combination of both in one device is appealing for more efficient and easy‐to‐use devices. Among the myriads of proposed approaches, there are multiple challenges to overcome to make these solutions realistic alternatives to current systems. This...
journal article 2018
document
Yu, Y. (author), Narayan, N.S. (author), Vega Garita, V.E. (author), Popovic, J. (author), Qin, Z. (author), Wagemaker, M. (author), Bauer, P. (author), Zeman, M. (author)
The past few years have seen strong growth of solar-based off-grid energy solutions such as Solar Home Systems (SHS) as a means to ameliorate the grave problem of energy poverty. Battery storage is an essential component of SHS. An accurate battery model can play a vital role in SHS design. Knowing the dynamic behaviour of the battery is...
journal article 2018
document
Vega Garita, V.E. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
Solar-battery systems are still expensive, bulky, and space consuming. To tackle these issues, we propose a novel device that combines all the components of a solar-battery system in one device. This device might help reduce installation cost compared to the current solar-battery systems as well as provide a plug-and-play solution. However, this...
journal article 2017
document
Chandra Mouli, G.R. (author), Bauer, P. (author), Zeman, M. (author)
This paper investigates the possibility of charging battery electric vehicles at workplace in Netherlands using solar energy. Data from the Dutch Meteorological Institute is used to determine the optimal orientation of PV panels for maximum energy yield in the Netherlands. The seasonal and diurnal variation in solar insolation is analyzed to...
journal article 2016
document
Chandra Mouli, G.R. (author), Kaptein, Johan (author), Bauer, P. (author), Zeman, M. (author)
Dynamic charging of electric vehicles (EV) refers to charging the EV using variable charging power. This is important for applications where the EV is charged from intermittent renewable energy sources like wind or solar. Dynamic charging can be implemented using three standards - AC charging, DC charging via Chademo and CCS/COMBO. This paper...
conference paper 2016
document
Vega Garita, V.E. (author), Ramirez Elizondo, L.M. (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
This paper focuses on the most common PV-storage architectures that are designed for residential applications and that incorporate storage devices like batteries, hydrogen systems, supercapacitors, and flywheels. The main motivations and a comparison of the advantages and disadvantages of the architectures are presented. Moreover, some common...
conference paper 2016
document
Ashok, VV (author), Onwudinanti, C (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
Currently PV modules are positioned to receive the highest amount of incident radiation in a year. Therefore, the generation pattern is independent of the consumption and a large storage is required to compensate for the same. This paper studies the possibility of orienting the modules differently in order to match the consumption more efficiently.
conference paper 2015
document
Sridhar, Jeyakrishna (author), Chandra Mouli, G.R. (author), Bauer, P. (author), Raaijen, Evert (author)
conference paper 2015
Searched for: subject%3A%22batteries%22
(21 - 40 of 42)

Pages