Searched for: subject%3A%22batteries%22
(41 - 60 of 217)

Pages

document
Fredon, R. (author)
Mankind has started taking the global warming problem into consideration, and has been doing so for decades. The relevance of the problem is slowly reaching everyone’s mind, which has resulted in fast growth in important related research topics, among which energy materials. One of the most important challenges has to do both with transportation...
doctoral thesis 2015
document
Chandra Mouli, G.R. (author), Bauer, P. (author), Zeman, M. (author)
This paper investigates the possibility of charging battery electric vehicles at workplace in Netherlands using solar energy. Data from the Dutch Meteorological Institute is used to determine the optimal orientation of PV panels for maximum energy yield in the Netherlands. The seasonal and diurnal variation in solar insolation is analyzed to...
journal article 2016
document
Grazioli, D. (author), Magri, M. (author), Salvadori, A. (author)
This review focuses on energy storage materials modeling, with particular emphasis on Li-ion batteries. Theoretical and computational analyses not only provide a better understanding of the intimate behavior of actual batteries under operational and extreme conditions, but they may tailor new materials and shape new architectures in a...
journal article 2016
document
Alavi, F. (author), van de Wouw, N. (author), De Schutter, B.H.K. (author)
Recently, the idea of using fuel cell vehicles as the future way of producing electricity has emerged. A fuel cell car has all the necessary devices on board to convert the chemical energy of hydrogen into electricity. This paper considers a scenario where a parking lot for fuel cell cars acts as a virtual power plant. In order to describe the...
conference paper 2016
document
Chandra Mouli, G.R. (author), Kaptein, Johan (author), Bauer, P. (author), Zeman, M. (author)
Dynamic charging of electric vehicles (EV) refers to charging the EV using variable charging power. This is important for applications where the EV is charged from intermittent renewable energy sources like wind or solar. Dynamic charging can be implemented using three standards - AC charging, DC charging via Chademo and CCS/COMBO. This paper...
conference paper 2016
document
Vega Garita, V.E. (author), Ramirez Elizondo, L.M. (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
This paper focuses on the most common PV-storage architectures that are designed for residential applications and that incorporate storage devices like batteries, hydrogen systems, supercapacitors, and flywheels. The main motivations and a comparison of the advantages and disadvantages of the architectures are presented. Moreover, some common...
conference paper 2016
document
Liu, Zhao (author), Verhallen, T.W. (author), Singh, D.P. (author), Wang, Hongqian (author), Wagemaker, M. (author), Barnett, Scott (author)
One of the main goals in lithium ion battery electrode design is to increase the power density. This requires insight in the relation between the complex heterogeneous microstructure existing of active material, conductive additive and electrolyte providing the required electronic and Li-ion transport. FIB-SEM is used to determine the three...
journal article 2016
document
Ganapathy, S. (author), Vasileiadis, A. (author), Heringa, J.R. (author), Wagemaker, M. (author)
Phase transitions play a crucial role in Li-ion battery electrodes being decisive for both the power density and cycle life. The kinetic properties of phase transitions are relatively unexplored and the nature of the phase transition in defective spinel Li<sub>4+</sub> <sub>x</sub>Ti<sub>5</sub>O<sub>12</sub> introduces a controversy as the...
journal article 2017
document
Peng, B. (author), Xu, Y. (author), Mulder, F.M. (author)
Si-based anode materials in Li-ion batteries (LIBs) suffer from severe volume expansion/contraction during repetitive discharge/charge, which results in the pulverization of active materials, continuous growth of solid electrolyte interface (SE!) layers, loss of electrical conduction, and, eventually, battery failure. Herein, we present...
journal article 2017
document
Vega Garita, V.E. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
Solar-battery systems are still expensive, bulky, and space consuming. To tackle these issues, we propose a novel device that combines all the components of a solar-battery system in one device. This device might help reduce installation cost compared to the current solar-battery systems as well as provide a plug-and-play solution. However, this...
journal article 2017
document
Qian, Kun (author), Tang, Linkai (author), Wagemaker, M. (author), He, Yan Bing (author), Liu, Dongqing (author), Li, Hai (author), Shi, Ruiying (author), Li, Baohua (author), Kang, Feiyu (author)
Through a facile sodium sulfide (Na<sub>2</sub>S)-assisted hydrothermal treatment, clean and nondefective surfaces are constructed on micrometer-sized Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> particles. The remarkable improvement of surface quality shows a higher first cycle Coulombic efficiency (≈95%), a significantly enhanced cycling...
journal article 2017
document
Basak, S. (author)
With the focus in automobile industry to switch from petroleum-based vehicles to all electric vehicles, the increasing demand on harvesting energy from renewable sources for a safer and greener future and the ever-increasing demand of the portable electronics systems, the need for better batteries is eminent. The ultimate aim of battery research...
doctoral thesis 2017
document
Tang, Linkai (author), He, Yan Bing (author), Wang, Chao (author), Wang, Shuan (author), Wagemaker, M. (author), Li, Baohua (author), Yang, Quan Hong (author), Kang, Feiyu (author)
Nanosized Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> (LTO) materials enabling high rate performance suffer from a large specific surface area and low tap density lowering the cycle life and practical energy density. Microsized LTO materials have high density which generally compromises their rate capability. Aiming at combining the favorable...
journal article 2017
document
Peng, B. (author), Xu, Y. (author), Wang, Xiaoqun (author), Shi, Xinghua (author), Mulder, F.M. (author)
Super P carbon black (SPCB) has been widely used as a conducting additive in Li/Na ion batteries to improve the electronic conductivity. However, there has not yet been a comprehensive study on its structure and electrochemical properties for Li/Na ion uptake, though it is important to characterize its contribution in any study of active...
journal article 2017
document
Peng, B. (author), Xu, Y. (author), Liu, Kai (author), Wang, Xiaoqun (author), Mulder, F.M. (author)
Black phosphorus (BP) has received increasing research attention as an anode material in sodium-ion batteries (SIBs), owing to its high capacity, electronic conductivity, and chemical stability. However, it is still challenging for BP-based SIB anodes to achieve a high electrochemical performance utilizing cost-effective materials and...
journal article 2017
document
Yu, C. (author), Ganapathy, S. (author), van Eck, Ernst R H (author), Wang, H.. (author), Basak, S. (author), Li, Z. (author), Wagemaker, M. (author)
Solid-state batteries potentially offer increased lithium-ion battery energy density and safety as required for large-scale production of electrical vehicles. One of the key challenges toward high-performance solid-state batteries is the large impedance posed by the electrode-electrolyte interface. However, direct assessment of the lithium...
journal article 2017
document
Kelder, E.M. (author), Marijnissen, J.C.M. (author), Karuga, S.W. (author)
journal article 2018
document
Liu, Yanyan (author), Zhang, Long (author), Wang, Hongqiang (author), Yu, C. (author), Yan, Xinlin (author), Liu, Qiunan (author), Xu, Bo (author), Wang, Li min (author)
Exploration of advanced anode materials is a highly relevant research topic for next generation lithium-ion batteries. Here, we report severe lattice distorted MoS<sub>2</sub> nanosheets with a flower-like morphology prepared with PEG400 as additive, which acts not only as surfactant but importantly, also as reactant. Notably, in the absence...
journal article 2018
document
Gioutsos, Dean Marcus (author), Blok, K. (author), van Velzen, Leonore (author), Moorman, Sjoerd (author)
Cost-optimal electricity system configurations with increasing renewable energy penetration were determined in this article for six islands of different geographies, sizes and contexts, utilizing photovoltaic energy, wind energy, pumped hydro storage and battery storage. The results of the optimizations showed strong reasoning for islands to...
journal article 2018
document
Sahu, Aarav Vijay (author), Park Lee, E.H. (author), Lukszo, Z. (author)
The vehicle-to-grid (V2G) service is slowly gaining momentum in its capacity to engage as a means of distributed generation. An aggregator's role is pivotal in the need to coordinate vehicles for V2G and maintain the security of supply of its customer base. The paper focuses on comparing the performance of the energy system when an aggregator...
conference paper 2018
Searched for: subject%3A%22batteries%22
(41 - 60 of 217)

Pages