Searched for: subject%3A%22bim%22
(1 - 20 of 111)

Pages

document
Koutamanis, A. (author)
Building information modelling (BIM) has ushered in the era of symbolic building representation: building elements and spaces are described not by graphical elements but by discrete symbols, each with properties and relations that explicitly integrate all information. Digital twinning promises even more: a digital replica in complete sync with...
book chapter 2024
document
Koutamanis, A. (author)
Planning regulations determine a substantial part of buildings, but their constraints are usually not included in the setup of a BIM model or used explicitly for design guidance, but only tested in compliance checks once a model has been made. This is symptomatic of wider tendencies and ingrained biases that emphasize tacit knowledge and assume...
journal article 2024
document
Zamzuri, A. (author), Abdul Rahman, A. (author), Hassan, M.I. (author), van Oosterom, P.J.M. (author)
This paper discussed two International Organization for Standardization (ISO) standards, namely, ISO 19152 – Land Administration Domain Model (LADM) and ISO 16739 – Industry Foundation Classes (IFC), to identify three-dimensional (3D) multi-floor building rights. These days, it is challenging to characterize all multifunctional structures due to...
journal article 2024
document
van der Vaart, J.A.J. (author), Stoter, J.E. (author), Diakite, A.A. (author), Biljecki, F. (author), Arroyo Ohori, G.A.K. (author), Hakim, Amir (author)
Although level of detail (LoD) is a central concept in 3D city modelling, specifying different LoDs in an unambiguous manner is not straightforward. To resolve this, a set of frameworks have been developed. This paper evaluates the suitability of the LoD framework of (Biljecki et al. 2016) for 3D building models that have been generated directly...
conference paper 2024
document
Papachristos, George (author), Papadonikolaki, E. (author), Morgan, Bethan (author)
Sociotechnical transitions are mostly seen in the literature as processes where actors and technologies in small niches peripheral to an organizational field, accumulate momentum, scale up, aggregate, and eventually bring about large-scale regime change. Foundational examples include the British transition from sailing ships to steamships and...
journal article 2024
document
Demetriades, Pavlos (author), Kalogianni, Eftychia (author), Dimopoulou, Efi (author)
Building Information Model (BIM) is a powerful tool for managing and utilizing data throughout the lifecycle of buildings and infrastructure. This paper explores the options, and considerations, of using BIM data for the Land Administration (LA) domain. The ISO19152 Land Administration Domain Model (LADM), as a widely recognized international...
conference paper 2023
document
Wang, Jinpeng (author), Zhang, Shang (author), Fenn, Peter (author), Luo, Xiaowei (author), Liu, Y. (author), Zhao, Lilin (author)
Previous studies revealed that Building Information Modeling (BIM) has the potential to reduce project uncertainties, design errors, change orders, and delays, which might facilitate achieving effective dispute management in the construction industry. However, research into the adoption of BIM to holistically enhance effective dispute...
review 2023
document
Gordon, Matthew (author), Batallé Garcia, A. (author), De Wolf, Catherine (author), Sollazzo, Aldo (author), Dubor, Alexandre (author), Wang, T. (author)
To address the need for a shift from a linear to a circular economy in the built environment, this paper develops a semi-automated assistive process for planning building material deconstruction for reuse using sensing and scanning, Scan-to-BIM, and computer vision techniques. These methods are applied and tested in a real-world case study in...
journal article 2023
document
Phan, Anh Thu Thi (author), Huynh, Thi Ngoc (author), Truong-Hong, Linh (author)
Laser scanning (LS) is an effective technology for accurately capturing point clouds of visible surfaces of objects in 3D scenes. The point clouds were subsequently used for various applications, for example, generating 2D drawings of the floor or building information models (BIM) and structural inspection. However, in practice, the products...
conference paper 2023
document
Wills, Nadine (author), Díaz, Joaquín (author)
Background and aim - Facility management (FM) refers to multidisciplinary activities pertaining to performance-based or results-based delivery. Although results-based delivery provides economic benefits, missing definitions of the demands on executing facility services (FS) present a challenge to contractors. Existing sensor-based systems for...
conference paper 2022
document
Gürsoy Sürmeneli, Hicret (author), Alkan, Mehmet (author), Koeva, Mila (author)
Four basic concepts form the basis of a modern land management system: Land Tenure, Land Value, Land Use, and Land Development. Cadastral studies are seen as the cornerstone of these four basic concepts. Especially, complex buildings located underground and above ground form the basis of 3D cadastral studies. In addition, international research...
conference paper 2022
document
Sladić, Dubravka (author), Radulović, Aleksandra (author), Jovanović, Dušan (author), Ruskovski, Igor (author), Gavrilović, Milan (author), Šarkanović-Bugarinović, Milka (author), Govedarica, Miro (author)
LADM profile for Serbia was developed by Radulović et al. (2017) reflecting the current state of Serbian cadastral information system which is based on 2D spatial information. It also provides general discussion of the need for establishing 3D cadastre in Serbia without specific details about its possible implementations and developments. Given...
conference paper 2022
document
Feringa, J. (author)
The presented research addresses the question of how to bridge the divide between academic research and industry in the domain of by investigating aspects of computational design , robotic fabrication and their impact on practice via a series of experiments and case studies. Research sub-questions related to the architectural model , geometry...
doctoral thesis 2022
document
Fang, Zigeng (author), Liu, Y. (author), Lu, Qiuchen (author), Pitt, Michael (author), Hanna, Sean (author), Tian, Zhichao (author)
A building's strategic asset management (SAM) capability has traditionally been limited by its site-based management. With the emergence of needs from clients about delivering a long-term portfolio-based building asset management plan that minimizes the asset risk and optimizes the value of their asset portfolios, SAM Units have emerged as a...
journal article 2022
document
Peng, Panyu (author), Ao, Yibin (author), Li, Mingyang (author), Wang, Yan (author), Wang, T. (author), Bahmani, Homa (author)
With the popularization and application of Building Information Modeling (BIM), the demand for BIM technical talents in the construction industry is increasing. Exploring college students’ BIM technical learning behavior is of great practical significance to improve education activities. Based on the Unified Theory of Acceptance and Use of...
journal article 2022
document
Yang, Yapin (author), Sun, Ying (author), Chen, Mingsi (author), Zhou, Yuekuan (author), Wang, Ran (author), Liu, Zhengxuan (author)
Fire at a construction site usually results in serious accidents. Therefore, fire management at the construction site is critical to decreasing possible accidents. However, conventional fire safety management can be problematic in many aspects, such as visualization, multi-stage alarm systems, and dynamic escape route optimization. To solve...
journal article 2022
document
Ao, Yibin (author), Peng, Panyu (author), Li, Jiayue (author), Bahmani, Homa (author), Wang, T. (author)
Building Information Modeling (BIM) has become the development trend in the architecture, engineering, and construction (AEC) industry. BIM discipline competition is an effective way for students of AEC-related disciplines to integrate theory with practice, and it is a key link to cultivate qualified BIM practitioners. This study takes...
journal article 2022
document
Hopfe, Christina Johanna (author), McLeod, Robert Scot (author), Gustin, Matej (author), Brembilla, E. (author), McElroy, Lori (author)
Abstract The Erasmus+ project, entitled ?Digital Erasmus ? a roadmap to using building performance simulation to achieve resilient design? (DesRes), seeks to transform the learning experience of students in built environment disciplines using a continuous digital learning cycle. Three universities play a part in this project: Graz University of...
journal article 2022
document
Bruggeman, E.M. (author)
book 2022
document
Guler, Dogus (author), Alattas, A.F.M. (author), Broekhuizen, Marjan (author), Kalogianni, E. (author), Kara, A. (author), van Oosterom, P.J.M. (author)
Τhe built environment has a vast and ever-growing number of complex and multi-layered buildings and other structures. The number of those is growing because of the increasing pressure on the limited space in cities. It is important to note that different professional sectors are involved in the realization of a new building. These sectors are...
conference paper 2022
Searched for: subject%3A%22bim%22
(1 - 20 of 111)

Pages