Searched for: subject%3A%22coatings%22
(1 - 20 of 215)

Pages

document
Ding, Z. (author)
Thermal barrier coatings (TBCs) are applied on the surface of metallic components of<br/>modern jet engines such as combustion chambers, blades and vanes, in order to increase the<br/>engine efficiency by allowing higher operating temperatures. However, during cooling from<br/>the operating temperature (i.e. 1000 °C) to room temperature high...
doctoral thesis 2024
document
Madelat, Negin (author), Wouters, Benny (author), Visser, Peter (author), Jiryaeisharahi, Zahra (author), Marcoen, Kristof (author), Abrahami, S.T. (author), Hubin, Annick (author), Terryn, H.A. (author), Hauffman, Tom (author)
In this work, the correlation between electrolyte transport properties and the variation of pigment volume concentration (PVC) in a series of organic coatings is explored. Using an odd random phase electrochemical impedance spectroscopy (ORP-EIS) approach, the diffusion of ions independent from water take-up is analysed. A higher PVC resulted...
journal article 2024
document
Li, Z. (author), Visser, Peter (author), Hughes, Anthony E. (author), Homborg, A.M. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author)
The quest for novel alternatives to hexavalent-chromium-based corrosion inhibitors is of utmost significance and urgency. Strict international health and safety regulations, due to growing concerns regarding the impact of hexavalent chromium on human health and the environment, have pushed the commercial introduction of many alternative...
journal article 2024
document
Lin, B. (author), Heijman, Sebastiaan (author), Rietveld, L.C. (author)
Ceramic nanofiltration (NF) is a promising alternative for direct surface water treatment, but is hampered for full-scale applications by fouling and a lack of eco-friendly cleaning regimes. In this work, an innovative reactive pre-coat layer, consisting of an iron oxychloride catalyst, was constructed on top of commercial ceramic NF...
journal article 2024
document
Zamponi, R. (author), Avallone, F. (author), Ragni, D. (author), Schram, C. (author), van der Zwaag, S. (author)
This paper elucidates the link between the near-wake development of a circular cylinder coated with a porous material in a low Mach-number flow and the related aerodynamic sound attenuation. It accomplishes this by formulating the cylinder flow-induced noise as a diffraction problem. The necessity for such an approach is driven by...
journal article 2024
document
Li, Z. (author), Homborg, A.M. (author), Visser, Peter (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author)
In this work, the corrosion mechanism of AA2024-T3 covered by a lithium-based conversion layer is studied with high spatial and temporal resolution. Although the aluminium alloy surface is protected by a multi-layered conversion layer, areas around intermetallic phases (IMPs) represent weak spots due to an insufficient generation of a...
journal article 2024
document
Magri, Etienne (author), Buhagiar, Vincent (author), Overend, M. (author)
The design trend of most commercial and office buildings over the past three decades focused on attaining a façade design with the highest possible window to wall ratio. Whereas this approach appears to satisfy the aesthetic scope of developing buildings that look ‘modern and transparent’ to maximise on real estate value, the demand for...
journal article 2023
document
Santos, Janaina S. (author), Márquez, Victor (author), Buijnsters, J.G. (author), Praserthdam, Supareak (author), Praserthdam, Piyasan (author)
This study presents environmentally friendly and low-cost synthetic routes to produce antimicrobial coatings over 5052 Al alloy based on plasma electrolytic oxidation (PEO) technology. Two methodologies were explored: the decoration with copper and anodic doping with copper ions. The porous oxide layers produced in silicate media presented...
journal article 2023
document
Ali, A.Z. (author), Jagannathan, Sadhna (author), Bennani, Yasmina-Doekhi (author), van der Hoek, J.P. (author), Spanjers, H. (author)
In this research, photoelectrocatalytic (PEC) based advanced oxidation process (AOP) was studied for the removal of multiple OMPs through an oxidative mechanism. This study investigated the application of a BiVO4 photoanode in simultaneous removal of three selected OMPs: acetaminophen (ACT), benzotriazole (BTA) and propranolol (PRO). This study...
journal article 2023
document
Okonkwo, Bright O. (author), Jeong, Chaewon (author), Lee, Hyeon Bae (author), Jang, Changheui (author), Rahimi, E. (author), Davoodi, Ali (author)
In this study, we developed and optimized a trivalent chromium coating electrodeposited on 304L stainless steel (SS) from a Cr-trivalent bath. The results reveal that the Cr coatings at all bath temperatures except for 80 °C showed clusters of polyhedral grains, however, the grain sizes decreased with an increase in bath temperature. Also,...
journal article 2023
document
Cutz, L. (author), Tiringer, U. (author), de Jong, W. (author), Mol, J.M.C. (author)
Long transport distances and extended storage of biomass pellets especially in humid environments provide a suitable setting for enhanced degradation in the form of moisture sorption, cracking and attrition. We developed an optically transparent, low-cost and environmentally friendly coating to reduce moisture sorption and storage degradation...
journal article 2023
document
Jahanmard, F. (author), Khodaei, A. (author), Flapper, Jasper (author), Dogan, O. (author), Roohi, K. (author), Taheri, P. (author), Weinans, Harrie (author), Storm, G. (author), Croes, M. (author), Mastrobattista, E. (author), Amin Yavari, S. (author)
Despite being the most widely used biomaterials in orthopedic surgery, metallic implants do not induce new bone growth because they are bioinert. Surface biofunctionalization of implants with immunomodulatory mediators is a recent approach to promote osteogenic factors that facilitate bone regeneration. Liposomes (Lip) can be used as a low-cost,...
journal article 2023
document
Wu, Wentao (author), Chu, Liangyong (author), Garcia, Santiago J. (author), van der Zwaag, S. (author), Li, Ming (author), Shen, Liming (author), Bao, Ningzhong (author)
In this paper, graphene oxide (GO) modified microcapsules have been developed for use in self-healing Cardanol-based epoxy anti-corrosion coatings on steel substrates. The microcapsules had a polymethyl methacrylate (PMMA) shell, covered with aminated GO flakes and contained either of the two complementary healing agents mixed with nanosized...
journal article 2023
document
Meeusen, M. (author), van Dam, J.P.B. (author), Madelat, N. (author), Jalilian, E. (author), Wouters, B. (author), Hauffman, T. (author), Van Assche, G. (author), Mol, J.M.C. (author), Hubin, A. (author), Terryn, H.A. (author)
In this work, a new finite element modelling (FEM) approach is followed to model spatiotemporally resolved water uptake in organic coatings. To this aim, we start from a physical model, where not only Fickian diffusion of water is taken into account but also the adsorption/desorption reaction of water on the polymer matrix. Starting from a...
journal article 2023
document
Mirhosseini, Seyed Hossein (author), Mosallaee, Masoud (author), Razavi, Mansour (author), Fotouhi, M. (author)
In this study, Al<sub>2</sub>O<sub>3</sub>-TiB<sub>2</sub> coating was successfully deposited on steel substrates by in situ plasma spraying (IPS) using H<sub>3</sub>BO<sub>3</sub>, Al, and TiO<sub>2</sub> reactants. Beside TiB<sub>2</sub> and Al<sub>2</sub>O<sub>3</sub>, Al<sub>18</sub>B<sub>4</sub>O<sub>33</sub> was formed as a by-product...
journal article 2023
document
Zhao, Guofeng (author), Moulijn, J.A. (author), Kapteijn, F. (author), Dautzenberg, Frits M. (author), Xu, Bin (author), Lu, Yong (author)
Heterogeneous catalysis plays a pivotal role in the current chemical and energy vectors production. Notably, to fully utilize the intrinsic activity and selectivity of a catalyst, the chemical reactor has to be designed and operated optimally to achieve enhanced heat/mass transfer, well-defined contact time of reactants, uniform flow pattern,...
journal article 2023
document
Sider, A. (author), Di Fronzo, C. (author), Amez-Droz, L. (author), Amorosi, A. (author), Badaracco, F. (author), Baer, P. (author), Bruno, G. (author), Cebeci, P. (author), Loicq, J.J.D. (author)
To achieve the expected level of sensitivity of third-generation gravitational-wave (GW) observatories, more accurate and sensitive instruments than those of the second generation must be used to reduce all sources of noises. Amongst them, one of the most relevant is seismic noise, which will require the development of a better isolation...
journal article 2023
document
Mirhosseini, Seyed Hossein (author), Mosallaee, Masoud (author), Razavi, Mansour (author), Fotouhi, M. (author)
This paper aims to study the effect of adding different SiC content on the wear performance of Al<sub>2</sub>O<sub>3</sub>-TiB<sub>2</sub>-SiC ternary composite coatings produced by the air plasma spraying process. The study used SHS powders as primary materials, consisting of H<sub>3</sub>BO<sub>3</sub>, Al, and TiO<sub>2</sub>, and 5, 10,...
journal article 2023
document
Zhang, Ying (author), Mao, Binbin (author), Yang, M. (author), Lu, Kaihua (author), Tian, Fuchao (author)
contribution to periodical 2023
document
Liu, Tong (author), Zhang, Dawei (author), Zhang, Rongjun (author), Wang, Jinke (author), Ma, Lingwei (author), Keil, Patrick (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Organic coatings are one of the most used and versatile technologies to mitigate corrosion of metals. However, organic coatings are susceptible to defects and damages that may not be easily detected. If not repaired timely, these defects may develop into major coating failures due to corrosion occurring in the damaged region, thereby limiting...
journal article 2023
Searched for: subject%3A%22coatings%22
(1 - 20 of 215)

Pages