Thermal deformation and stress of alkali-activated slag concrete under semi-adiabatic condition: Experiments and simulations

This study investigates the deformation of free and stress of restrained alkali-activated slag concrete (AASC), respectively, under semi-adiabatic condition. The concrete shows first thermal expansion, which is compensated soon by autogenous shrinkage. The subsequent cooling down of the concrete aggravates shrinkage and development of tensile...

Strain-Hardening Cementitious Composite (SHCC) For Durable Concrete Repair

Infrastructure is ageing and we are facing a serious challenge on how to deal with it. One possible solution is to repair it, but the life of current concrete repairs, including all types of repairs and application of different materials, is not satisfactory and there is an urgent need for improvement. Understanding the damage development in a...

Mesoscopic modeling of the impact behavior and fragmentation of porous concrete

This study presents the numerical analyses conducted to investigate the impact behavior of different porous concretes, which have also been cast and tested experimentally. For a realistic representation of the real porous concretes containing arbitrary shaped air pores, a mesh generation code was developed in which the aggregates in the...

Impact behavior of model porous concretes

In this work, findings of a numerical study performed to investigate the impact behavior of porous concrete, modeled as a four phase cementitious composite consisting of aggregates, cement paste, interfacial transition zones (ITZ) and air, are presented. The numerical analyses contributed to the process of designing a special type of concrete...

Numerical analysis of heating rate effect on spalling of high-performance concrete under high temperature conditions

High-performance concrete (HPC) is vulnerable to spalling under high temperature conditions and it has been found that the heating rate can exert a tremendous effect on spalling of HPC. To prevent HPC from spalling, the heating rate effect should be understood. However, quantitative analyses are still lacking and the heating rate effect has...

Modeling framework for fracture in multiscale cement-based material structures

Multiscale modeling for cement-based materials, such as concrete, is a relatively young subject, but there are already a number of different approaches to study different aspects of these classical materials. In this paper, the parameter-passing multiscale modeling scheme is established and applied to address the multiscale modeling problem...

Societal Burden and Engineering Challenges of Ageing Infrastructure

Ageing is an inherent feature of nature and, hence, of materials, structures and systems. Yet, it seems a rather new topic in both science and engineering. The main reason for increasing attention for ageing as a topic is the growing awareness that, particularly in industrialized countries, ageing of our assets is a financial burden for the...

Determination of Chloride Content in Cementitious Materials: From Fundamental Aspects to Application of Ag/AgCl Chloride Sensors

This paper reports on the advantages and drawbacks of available test methods for the determination of chloride content in cementitious materials in general, and the application of Ag/AgCl chloride sensors in particular. The main factors that affect the reliability of a chloride sensor are presented. The thermodynamic behaviour of silver in the...

A 3D Lattice Modelling Study of Drying Shrinkage Damage in Concrete Repair Systems

Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems. The magnitude of induced stresses depends on many factors, for example the degree of restraint, moisture gradients caused by curing and drying conditions, type of repair material, etc. Numerical...

Effect of corrosion on the fatigue service-life on steel and reinforced concrete beams

Chloride-induced corrosion is a point of big concern in reinforced concrete (RC) structures. To monitor the actual health and to predict the remaining service-life of structures, it is important to understand the structural behaviour and the failure mechanism of structures exposed to chlorides under fatigue loading conditions. A beam test,...

A modelling study of drying shrinkage damage in concrete repair systems

Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems (Martinola, Sadouki et al. 2001, Beushausen and Alexander 2007). Magnitude of induced stresses depends on many factors, for example the amount of restraint, moisture gradients caused by different curing...

Bio-inspired control of material properties in civil engineering: Current concept for corrsoion protection via the application of bacteria and bio-polymers

The improvement of material properties of cement-based materials e.g. reduced permeability, porosity, uniform distribution of hydration products, etc. is of a significant importance and related to durability and sustainability of concrete and reinforced concrete structures. With this respect, a recent and novel approach is to "create" self...