- document
-
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...journal article 2024
- document
-
Shakeri, I. (author), Wu, W. (author), Michel, Alexander (author), Eder, Martin A. (author)The present study proposes a novel model to modify master S-N curves of components according to their load redistribution capability reflected in different boundary conditions (BCs) based on the fracture mechanics analysis. To that end, a comprehensive numerical study was conducted on a Single Edge Notch Bend (SENB) specimen constrained with...journal article 2024
- document
-
Gomez, A. (author), Banis, A. (author), Avella, M. (author), Molina-Aldareguia, J. M. (author), Petrov, R.H. (author), Dutta, A. (author), Sabirov, I. (author)Numerous studies have demonstrated the viability of lightweight Fe-Mn-Al-C steels for exhibiting an improved balance of high strength and high ductility in automotive applications. However, their high-cycle fatigue behaviour has been scarcely studied. This work examines the effect of κ-carbides formed during the aging treatment on the high...journal article 2024
- document
-
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)Wind turbine blades carry the risk of impact damage during transportation, installation, and operation. Such impacts can cause levels of damage that can propagate throughout the structure compromising performance and safety. In this study, the effect of impact damage on fatigue damage propagation in test specimens representative of a spar cap...journal article 2024
- document
-
Tsetas, A. (author)The ambitious goals towards the decarbonization of the global energy sector have amplified the demand for renewable energy resources. Amongst the renewables, offshore wind possesses a pivotal role in this endeavour, showcasing remarkable growth in recent years. However, this rapid expansion has been accompanied by a series of technical...doctoral thesis 2023
- document
-
Cheng, L. (author)In the past two decades, offshore wind has emerged as a new source of renewable energy. This highlights the requirement for the utilisation of larger and more efficient offshore wind turbines (OWTs). The connections used in support structures of OWTs are critical to ensure the excellent structural performance of OWFs. An alternative option is...doctoral thesis 2023
- document
-
Faucon, L.E.K. (author), Boot, T. (author), Riemslag, A.C. (author), Scott, S.P. (author), Liu, Ping (author), Popovich, V. (author)In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry that mimics a small-scale pipeline with high internal hydrogen gas pressure. The effect of hydrogen...journal article 2023
- document
-
Moradi, M. (author), Chiachío, Juan (author), Zarouchas, D. (author)Composite structures are highly valued for their strength-to-weight ratio, durability, and versatility, making them ideal for a variety of applications, including aerospace, automotive, and infrastructure. However, potential damage scenarios like impact, fatigue, and corrosion can lead to premature failure and pose a threat to safety. This...conference paper 2023
- document
-
Olivier, G. (author), Csillag, Fruzsina (author), Christoforidou, A. (author), Tromp, Liesbeth (author), Veltkamp, Martijn (author), Pavlovic, M. (author)Due to the low weight and excellent durability of composite materials, Fibre Reinforced Polymer (FRP) decks mounted on steel superstructures are becoming increasingly common in engineering practice. Bolted joints are generally used to facilitate connections between an FRP deck and steel girders in road bridges. The connections are subjected...journal article 2023
- document
-
Pascoe, J.A. (author), Tu, W. (author), Biagini, D. (author), Alderliesten, R.C. (author)Fibre reinforced polymer composites have found increasing use in aircraft structures. This means that fleet managers need damage assessment tools for such materials, in order to decide on appropriate sustainment strategies. Developing such tools is hindered by the difficulty of generalising from lab tests to predict the behaviour of full-scale...conference paper 2023
- document
-
Biagini, D. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author)Impacts on carbon fiber reinforced composites (CFRP) can produce a complex internal damage comprising multiple delaminations, which is hard to detect from visual inspection. This situation is known as barely visible impact damage (BVID). Considering that every airplane faces several impacts during its operational life, and that the majority of...conference paper 2023
- document
-
Moradi, M. (author), Gul, F.C. (author), Chiachío, Juan (author), Benedictus, R. (author), Zarouchas, D. (author)A health indicator (HI) serves as an intermediary link between structural health monitoring (SHM) data and prognostic models, and an efficient HI should meet prognostic criteria, i.e., monotonicity, trendability, and prognosability. However, designing a proper HI for composite structures is a challenging task due to the complex damage...conference paper 2023
- document
-
Niu, D. (author), Zhang, Zhao (author), Gao, Y. (author), Li, Yuanxiao (author), Yang, Zhengxian (author), Niu, Yanhui (author)Cow dung waste has caused severe environmental pollution and public health issues in China. In this study, the cow dung residues were used as a cheap renewable fiber to modify asphalt binder, providing a new solution for the proper disposal of cow dung waste. Three cow dung fibers with two lengths were prepared using different treatments,...journal article 2023
- document
-
Nikolic, Ksenija (author), Mattos Ferreira, V. (author), Malet, Loïc (author), Depover, Tom (author), Verbeken, Kim (author), Petrov, R.H. (author)The microstructure of a damaged bearing from the field was characterized in this work with the intention to better understand microstructural features behind formation of White Etching Cracks (WEC) in bearings. Microstructural characterization of the altered white etching area (WEA) involved conventional electron backscattered diffraction ...journal article 2023
- document
-
Cheng, L. (author), Yang, Fei (author), Seidel, Marc (author), Veljkovic, M. (author)The overall competitiveness of offshore wind turbine towers is significantly influenced by the selection of the connection. The following three types of connections: a conventional bolted ring flange (RF) connection, ring flange connection with defined contact surfaces (RFD), and C1 wedge connection (C1-WC) are considered. A quantitative...journal article 2023
- document
-
Liao, D.L. (author), Cheng, L. (author), Correia, J.H.G. (author), Veljkovic, M. (author), Zhu, Shun Peng (author), Winkes, Jasper (author), Creusen, Koen (author), Berto, Filippo (author)Hole patterns are common in engineering design for connections and/or assembly purposes. Geometrical discontinuities can cause stress concentration in localized areas, making them more prone to fatigue crack initiation and influencing the fatigue life of the overall unit. In the past, much effort has been exerted on fatigue modelling of holed...journal article 2023
- document
-
Leonetti, Davide (author), Mattos Ferreira, V. (author), Schotsman, B. (author)R350HT is a standard premium heat-treated rail steel and the reference for new rail steel development. The present study discusses an experimental characterization of fatigue crack growth rate and fracture toughness for this refined pearlitic rail steel in mode-I-loading. The tests are carried out on compact tension specimens extracted from...journal article 2023
- document
-
Feng, W. (author), Moreira Arouche, M. (author), Pavlovic, M. (author)Hybrid bi-material concepts in engineering structures where fibre-polymer composites are used together with steel structural members have potential to reduce material usage, extend fatigue life and improve structural reliability. The bond performance of the bi-material composite-to-steel interface is of crucial importance and highly relies on...journal article 2023
- document
-
Hofman, P. (author), van der Meer, F.P. (author), Sluys, Lambertus J. (author)In this work, a recently proposed high-cycle fatigue cohesive zone model, which covers crack initiation and propagation with limited input parameters, is embedded in a robust and efficient numerical framework for simulating progressive failure in composite laminates under fatigue loading. The fatigue cohesive zone model is enhanced with an...journal article 2023
- document
-
Galanopoulos, Georgios (author), Milanoski, Dimitrios (author), Eleftheroglou, N. (author), Broer, Agnes A.R. (author), Zarouchas, D. (author), Loutas, Theodoros (author)An increasing interest for Structural Health Monitoring has emerged in the last decades. Acoustic emission (AE) is one of the most popular and widely studied methodologies employed for monitoring, due to its capabilities of detecting, locating and capturing the evolution of damage. Most literature so far, has employed AE for characterizing...journal article 2023