Searched for: subject%3A%22flows%22
(1 - 20 of 74)

Pages

document
Prades, Lledó (author), Fabbri, Stefania (author), Dorado, Antonio D. (author), Gamisans, Xavier (author), Stoodley, Paul (author), Picioreanu, C. (author)
Experimental data showed that high-speed microsprays can effectively disrupt biofilms on their support substratum, producing a variety of dynamic reactions such as elongation, displacement, ripple formation, and fluidization. However, the mechanics underlying the impact of high-speed turbulent flows on biofilm structure is complex under such...
journal article 2020
document
Schoenmaker, Lars (author)
In this thesis diffuser performance will be simulated with computational fluid dynamics, which will be done with the program Ansys Fluent. The expanding geometry creates an adverse pressure gradient and under certain conditions there will also be separation.<br/><br/>At first a relative simple simulation will be done of a one-directional...
master thesis 2017
document
Smyrnis, A. (author)
Block mattresses or block mats are, nowadays, very commonly applied as protection in a large range of applications either against flow or wave loads. Specifically, this large range of applications contains offshore pipeline protection and stabilization, erosion and scour protection, protection of embankments and river banks (slope protection)....
master thesis 2017
document
Boersma, B.J. (author), Pecnik, R. (author), Nemati, H. (author), Peeters, J.W.R. (author)
In this paper we discuss the effect of sharp property variations on the turbulent heat transfer in fluids close the critical point. The governing equations for this flow regime are discussed, a short description of the numerical tools that have been developed to study these flows is given. Finally, some results for supercritical heat transfer in...
journal article 2015
document
Tokgöz, S. (author)
Taylor-Couette flow is defined as the flow confined between two coaxial cylinders which can rotate independently. Several different flow states can be observed in the gap between the cylinders by changing the rotation speeds and the rotating directions of the cylinders. The aim of this thesis is to investigate the previously reported change of...
doctoral thesis 2014
document
Warncke, N.G.W. (author)
This thesis studies the hydrodynamics of froth flotation, a process that is used in industry as a means of removing small inclusions from the treated liquid by gas bubble injection. This work is particularly motivated by the removal of aluminium and silicon oxides from liquid steel. Hydrodynamic aspects have a strong influence on the efficiency...
doctoral thesis 2014
document
Steenstra, R.S. (author)
For the design of granular bed protections often a stability parameter is used. The stability parameter represents the forces that are acting on the stones and is used to predict the response of the bed to these forces. Existing parameters are often derived for a limited range of application. When the parameter is used outside this range, the...
master thesis 2014
document
Sun, Z. (author)
The micro vortex generator (MVG) is used extensively in low speed aerodynamic problems and is now extended into the supersonic flow regime to solve undesired flow features that are associated with shock wave boundary layer interactions (SWBLI) such as flow separation and associated unsteadiness of the interaction system. Numerous experimental...
doctoral thesis 2014
document
Van Campen, L.J.A.M. (author)
Separation of oil and water is an essential step in the treatment of the production streams from fossil oil wells. Settling by gravity is a robust though voluminous process and therewith expensive method at remote locations, leading to a need for smaller separation equipment. In this thesis, we describe the research performed on the development...
doctoral thesis 2014
document
Burchard, H. (author), Schuttelaars, H.M. (author), Rockwell Geyer, W. (author)
In this idealized numerical modeling study, the composition of residual sediment fluxes in energetic (e.g., weakly or periodically stratified) tidal estuaries is investigated by means of one-dimensional water column models, with some focus on the sediment availability. Scaling of the underlying dynamic equations shows dependence of the results...
journal article 2013
document
Derakhshani, S.M. (author), Schott, D.L. (author), Lodewijks, G. (author)
Dust emissions can have significant effects on the human health, environment and industry equipment. Understanding the dust generation process helps to select a suitable dust preventing approach and also is useful to evaluate the environmental impact of dust emission. To describe these processes, numerical methods such as Computational Fluid...
conference paper 2013
document
Voermans, J.J. (author)
Little research was done in the past concerning the propagation of three dimensional effect in shallow wake flow caused by a roughness patch. Today’s research on related subjects is dominated by emerging obstructions in shallow water where the flow can be assumed as (quasi) two dimensional. However the relevance of a submerged obstruction with...
master thesis 2013
document
Violato, D. (author), Scarano, F. (author)
The three-dimensional behavior of jet core breakdown is investigated with experiments conducted on a free water jet at Re = 5000 by time-resolved tomographic particle image velocimetry (TR-TOMO PIV). The investigated domain encompasses the range between 0 and 10 jet diameters. The characteristic pulsatile motion of vortex ring shedding and...
journal article 2013
document
Lay-Ekuakille, A. (author), Palamara, I. (author), Caratelli, D. (author), Morabito, F.C. (author)
Subterranean waters are often polluted by industrial and anthropic effluents that are drained in subsoil. To prevent and control pollution, legislations of different developed countries require an online monitoring measurement, especially for detecting organic solvents (chlorinated and unchlorinated ones). Online measurements include both real...
journal article 2013
document
Trip, R. (author), Kuik, D.J. (author), Westerweel, J. (author), Poelma, C. (author)
The transitional regime of a sinusoidal pulsatile flow in a straight, rigid pipe is investigated using particle image velocimetry. The main aim is to investigate how the critical Reynolds number is affected by different pulsatile conditions, expressed as the Womersley number and the oscillatory Reynolds number. The transition occurs in the...
journal article 2012
document
Violato, D. (author), Scarano, F. (author)
The three-dimensional behavior of flow transition in circular and 6-chevron jets at Re?=?5000 is investigated with experiments conducted on a free water jet by time-resolved tomographic particle image velocimetry. The emphasis is on the unsteady organization of coherent flow structures, which play a role in the generation of acoustic noise....
journal article 2011
document
Kuik, D.J. (author)
In this thesis the transition to turbulence in pipe flow is investigated. At low Reynolds numbers, the flow returns to the laminar state spontaneously. At high Reynolds number a small perturbation causes the flow to suddenly become turbulent. In the intermediate regime localized turbulence is observed. This regime is investigated using...
doctoral thesis 2011
document
Kenjeres, S. (author)
Motivated by the concept of interdependency of turbulent flow and electromagnetic fields inside the spiraling galaxies, we explored the possibilities of generating a localized Lorentz force that will produce a three-dimensional swirling flow in weakly conductive fluids. Multiple vortical flow patterns were generated by combining arrays of...
journal article 2011
document
Van Balen, W. (author), Uijttewaal, W.S.J. (author), Blanckaert, K. (author)
Large-eddy simulation (LES) is performed of a curved open-channel flow over topography based on the laboratory experiment by Blanckaert [“Topographic steering, flow circulation, velocity redistribution and bed topography in sharp meander bends,” Water Resour. Res., doi:10.1029/2009WR008303 (in press)] . In the experiment, the large-scale bed...
journal article 2010
document
Van Sabben, A.J. (author)
For a proper management of rivers and river bends in particular, it is important to have good models to predict the flows through bends. It is important that those developed models are well validated with measurements to demonstrate the usefulness of the models. This research is a validation of the Delft3D-FLOW model which is a model that is...
master thesis 2010
Searched for: subject%3A%22flows%22
(1 - 20 of 74)

Pages