Recycling of Aluminosilicate-Based Solid Wastes through Alkali-Activation: Preparation, Characterization, and Challenges

Recycling aluminosilicate-based solid wastes is imperative to realize the sustainable development of constructions. By using alkali activation technology, aluminosilicate-based solid wastes, such as furnace slag, fly ash, red mud, and most of the bio-ashes, can be turned into alternative binder materials to Portland cement to reduce the carbon...

Characterization of one-part alkali-activated slag with rice straw ash

In this paper, fresh (setting and rheology) and hardened properties (strength and shrinkage) of one-part alkali-activated slag (AAS) with and without rice straw ash (RSA) are comprehensively investigated. The reaction kinetics and microstructure of the mixtures are characterized by a series of experimental techniques. The results reveal that...

A comparison between alkali-activated slag/fly ash binders prepared with natural seawater and deionized water

In this research, the effects of natural seawater (SW) on the properties of alkali-activated slag/fly ash (AASF) are studied. AASF prepared with deionized water is set as the reference mixture. The results showed that the use of natural SW resulted in a prolonged setting time and lower heat release, but no obvious impact on the flowability of...

Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders

One-part alkali-activated slag (AAS) binders are more promising in large-scale constructions because one-part mixing procedure is safer and easier to handle compared to normal two-part method. Thus, this study aims at investigating different properties of one-part AAS binders and control samples prepared using the two-part method. Experimental...