- document
- Bauer, R.A. (author), Van den Assem, A. (author), Van der Put, P.J. (author), Scarlett, B. (author), Schoonman, J. (author) conference paper 1990
- document
- Butchereit, E. (author), Schoonman, J. (author), Zandbergen, H.W. (author), Lutz-Elsner, C. (author), Schreiber, M. (author), Wang, P. (author) conference paper 1995
- document
-
The paper systematically describes the evolution of the microstructure of a styrene acrylate polymer cement concrete in relation to its mechanical properties and durability. The results presented and discussed at the present paper involve the interaction of the polymer dispersion with portland cement; the effect of the polymer modification on...journal article 1995
- document
- Sloof, W.G. (author) doctoral thesis 1996
- document
- Mantel, O.C. (author), Van der Zant, H.S.J. (author), Steinfort, A.J. (author), Traeholt, C. (author), Dekker, C. (author) journal article 1997
- document
-
Pietersen, H.S. (author)A Portland fly ash cement containing 20% of a fine fly ash and a blast furnace slag cement of approximately 290 days old were examined with analytical transmission electron microscopy, in order to examine the (local) microstructure in these cements in detail. In the Portland fly ash cement the fly ash reacted with CH resulting from the cement...journal article 1999
- document
-
Van Breugel, K. (author), Fraaij, A.L.A. (author)This paper describes an ultrasonic experimental set-up to monitor the development of the microstructure of fresh concrete at different temperatures (isothermal curing at 10, 20, 30 and 50 °C) and water/cement ratios (0.40, 0.45 and 0.55). The Ultrasonic Pulse Velocity (UPV) is used as an indication for microstructure development of concrete at...journal article 2001
- document
-
Ye, Guang (author)The aim of this thesis was to investigate and to simulate the development of the microstructure, porosity and permeability in hardening cement-based materials. Based on experimental information and the cement hydration model HYMOSTRUC, the microstructural details including porosity, connectivity of pores and pore size distribution were...doctoral thesis 2003
- document
- Fratila-Apachitei, E.L. (author) doctoral thesis 2004
- document
-
Elsner, A. (author)Steel producers are forced to reduce the production cost on the one hand and increase the performances of the products on the other hand, to maintain or even increase their market share. A likely method to save on production costs is to cut down the rather long production chain for conventional cold rolled strip, and to substitute certain cold...doctoral thesis 2005
- document
-
Copuroglu, O. (author)Blast furnace slag cement concrete is used extensively in a number of countries. In comparison with OPC, it is particularly well known for its excellent performance in marine environments. One dis-advantage of slag cement is its vulnerability to scaling under the combined load of freezing-thawing and de-icing salts. The current investigation was...doctoral thesis 2006
- document
- Ye, G. (author), Liu, X. (author), Poppe, A.M. (author), De Schutter, G. (author), Van Breugel, K. (author) journal article 2007
- document
-
Mecozzi, M.G. (author)Abstract not availabledoctoral thesis 2007
- document
-
Pujada, B.R. (author), Tichelaar, F.D. (author), Janssen, G.C.A.M. (author)Tungsten carbide-diamond like carbon (WC-DLC) multilayer coatings have been prepared by sputter deposition from a tungsten-carbide target and periodic switching on and off of the reactive acetylene gas flow. The stress in the resulting WC-DLC multilayers has been studied by substrate curvature. Periodicity and microstructure have been studied by...journal article 2007
- document
-
Simonov, A.N. (author), Grabarnik, S. (author), Vdovine, G.V (author)We have investigated the possibility of using transparent stretchable diffraction gratings for spectrometric applications. The gratings were fabricated by replication of a triangular-groove master into a transparent viscoelastic. The sample length, and hence the spatial period, can be reversibly changed by mechanical stretching. When used in a...journal article 2007
- document
- Tjahjanto, D.D. (author) doctoral thesis 2008
- document
-
Jankovic, D. (author)Novel modifications of an environmental scanning electron microscope (ESEM) were made in order to measure the local deformations in drying cement paste. These nondestructively determined moisture-induced plane strains, obtained in 1 mm thick cement paste samples, are orthotropic. They vary with variations of relative humidity between 70%-80% and...conference paper 2008
- document
- Andersson, R.A. (author) doctoral thesis 2008
- document
-
Luzginova, N.V. (author)With the aim of reaching a better understanding of the microstructure evolution and the overall phase transformation kinetics in hyper-eutectoid steels a commercial SAE 52100 bearing steel and 7 model alloys with different concentrations of chromium, cobalt and aluminum have been studied in this work, both experimentally and theoretically. The...doctoral thesis 2008
- document
-
Rajaraman, V. (author), Pakula, L.S. (author), Pham, H.T.M. (author), Sarro, P.M. (author), French, P.J. (author)This paper presents a new low-cost, CMOS-compatible and robust wafer-level encapsulation technique developed using a stress-optimised PECVD SiC as the capping and sealing material, imparting harsh environment capability. This technique has been applied for the fabrication and encapsulation of a wide variety of surface- and thin-SOI...conference paper 2009