Unfolding the Early Fatigue Damage Accumulation for Cross-ply Laminates

Fatigue damage of composite laminates has attracted considerable attention from research community and industry, in view that laminated structures are inevitable to suffer from fatigue loading during their service life. It is rather complicated to understand and explain, what governs the initiation, accumulation, interaction (synergy or...

Autogenous shrinkage of alkali-activated slag and fly ash materials: From mechanism to mitigating strategies

Alkali-activated materials (AAMs), as eco-friendly alternatives to Ordinary Portland cement (OPC), have attracted increasing attention of researchers in the past decades. Unlike cement, which requires calcination of limestone, AAMs can be made from industrial by-products, or even wastes, with the use of alkali-activator. The production of AAMs...

Development of an Integrated Analytical Model to Predict the Wet Collapse Pressure of Flexible Risers

A flexible riser is a multi-layered pipe device which enables deep-water production by connecting seabed facilities to floating vessels. To withstand huge hydro-static pressure, it is required to have strong collapse capacities. At present, the collapse capacity of a flexible riser is designed based on a "wet collapse'' concept, in which the...

Surface Crack Growth in Metallic Pipes Reinforced with Composite Repair System

Surface cracks are serious threats to the structural integrity of offshore metallic pipes. This dissertation proposes a protocol of composite reinforcement on surface cracked metallic pipes subjected to cyclic loads, aiming to decrease the crack growth rate and prolong the residual fatigue life. The main objective of this dissertation is to...

Visual Navigation and Optimal Control for Autonomous Drone Racing

Drones, especially quadrotors, have shown their great value for applications like aerial photography, object delivery and warehouse inspection. At the same time, with the de- velopment of Artificial Intelligence (AI), computers can replace humans and even per- form better than humans in some areas where it was impossible before like the AI pro-...

Response of monopiles subjected to combined vertical and lateral loads, lateral cyclic load, and scour erosion in sand

Although wind energy capacity has increased significantly in the last few decades, the installed capacity of offshore wind turbine still lags far behind that of onshore wind turbines due to the installation and foundation cost. The aim of this research project has been to clarify the influence of combined vertical and lateral loads, lateral...

Characterization and Design of Complex Networks

Characteristics of Chinese Driver Behavior

The high growth rate of vehicle ownership and many novel drivers in China determine the special features of Chinese driver behavior. This thesis introduces a comparative study on driver behavior by the analysis of saturation flow at urban intersections, Driver Behavior Questionnaire surveys, focus group discussion, and in-car tests. The main...

Mathematical modelling of morphological changes and hyperconcentrated floods in the Yellow River

Hyperconcentrated flow/flood is a water-driven sediment transport phenomenon, which is characterized by high sediment concentrations between normal sediment-laden flow and debris/mud flow. In a hyperconcentrated flow, strong interactions exist between water flow, sediment, and river bed, which may not only change the flow rheological properties,...

Probabilistic estimation of dune erosion and coastal zone risk

Coastal erosion has gained global attention and has been studied for many decades. As a soft sea defence structure, coastal sandy dunes protect coastal zones all over the world, which usually are densely populated areas with tremendous economic value. The coastal zone of the Netherlands, one of the most well-known vulnerable areas to coastal...

Tyre - Road Noise, Surface Characteristics and Material Properties

Noise levels due to road traffic have reached intolerable high levels in and around many urban areas all around the world. Because of health reasons and reasons of well- being these noise levels have to be reduced. The noise produced from the interaction between the rolling tyre and road surface is one of the most important contributions in the...

Micromilling of hardened tool steels

Miniaturized parts are increasingly demanded in different fields like medical, transportation, environmental, and communication industries. In order to manufacture these parts in an economical way, mass replication methods, such as micro injection molding, have to be applied. Currently, Electro Discharge Machining (EDM) process is mainly used to...