Influence of pore property and alkalinity on the bio-deposition treatment efficiency of recycled aggregates

Microbial induced calcium carbonate precipitation (MICP) technology has been successfully used to enhance the properties of recycled concrete aggregates. However, the complex source and varied physical and chemical properties of recycled aggregates may have influence on the modification efficiency since microbes are often sensitive to the...

Revealing the influence of Mo addition on interphase precipitation in Ti-bearing low carbon steels

Mo is widely used as an effective microalloying element to improve mechanical performance of interphase precipitation steels, but the precise role of Mo in interphase precipitation behavior is not fully understood. In this contribution, interphase precipitation behavior in a series of Ti-Mo-bearing low carbon steels is systematically studied,...

Tailoring precipitation/properties and related mechanisms for a high-strength aluminum alloy plate via low-temperature retrogression and re-aging processes

The retrogression and re-aging (RRA) processes, aimed mainly at tailoring intergranular precipitates, could significantly improve the corrosion resistance (i.e., stress corrosion cracking resistance) without considerably decreasing the strength, which signifies that an efficient control of the size, distribution and evolution of intergranular...

Precipitation of supersaturated solute in H ion irradiated Fe-Au and Fe-Au-W alloys studied by positron annihilation spectroscopy

The effect of thermal aging of homogenized Fe-Au and Fe-Au-W alloys, irradiated at room temperature with hydrogen ions, was studied for an aging treatment at 300 °C for aging times up to 100 h. The aging behavior of the Fe-based alloys is compared to the results for pure Fe. The precipitation behavior of Au-rich and W-rich precipitates and...

Microstructure, precipitate and property evolution in cold-rolled Ti-V high strength low alloy steel

A cold-rolled Ti-V high strength low alloy (HSLA) steel was isothermally annealed at 650 °C and 700 °C for different times. A unique combination of techniques including visible light microscopy (VLM), transmission electron microscopy (TEM), matrix dissolution, small angle neutron scattering (SANS) and hardness measurement has been employed to...

Self healing of radiation-induced damage in Fe–Au and Fe–Cu alloys: Combining positron annihilation spectroscopy with TEM and ab initio calculations

Self healing of early stage radiation damage by site selective solute segregation is a promising approach to extend the lifetime of nuclear reactor components. In the present study, the creation and autonomous healing of irradiation-induced damage is investigated in pure Fe and high purity Fe–Au and Fe–Cu model alloys. To create radiation...

Mediation of high temperature radiation damage in bcc iron by Au or Cu precipitation

High temperature radiation damage in binary bcc Fe alloys containing 1 atomic % Au or Cu due to Fe ion irradiation at 550 °C to a peak dose of 2.8 and 8.3 dpa is studied. The precipitation behavior of gold and copper and its correlation to the irradiation-induced defects is studied by transmission electron microscopy and variable energy...

Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

The interaction between moving α/γ interfaces and interphase precipitated (IPd) carbides during the austenite (γ) to ferrite (α) and the ferrite (α) to austenite (γ) transformation has been systematically investigated through cyclic phase transformation experiments for a 0.1C-1.5Mn alloy containing 0.1 wt% Niobium (Nb) and its Nb-free...

Early stage precipitation in aluminum alloys: An ab initio study

Multiscale computational materials science has reached a stage where many complicated phenomena or properties that are of great importance to manufacturing can be predicted or explained. The word “ab initio study” becomes commonplace as the development of density functional theory has enabled the predictions to be independent of experimental...

Self healing of damage in Fe-based alloys

Steel components can exhibit premature and low-ductility creep fracture, when exposed to high temperatures for long times. The failure arises from the formation, growth and coalescence of ultra-fine cracks and cavities. Self healing of damage is a promising new approach to enhance the lifetime of the steel components, in particular for...

Self healing by Cu precipitation in deformed Fe-Cu-B-N-C

Steels are among the most widely used construction materials as their mechanical properties can be tuned over a very wide range of desired combinations of strength formability and other properties. However, when exposed for long times to high temperatures steel components can exhibit premature and low-ductility creep fracture, which arises from...

Self healing by Cu precipitation in deformed Fe-Cu-B-N-C

Steels are among the most widely used construction materials as their mechanical properties can be tuned over a very wide range of desired combinations of strength formability and other properties. However, when exposed for long times to high temperatures steel components can exhibit premature and low-ductility creep fracture, which arises from...

Enhancing the creep life of steels by self-healing through dynamic in-service precipitation

Abstract only.