- document
-
Wang, C. (author)Lack of facilities in supporting design reuse is a serious problem in product shape modeling, especially in computer-aided design systems. This becomes a bottleneck of fast shape conceptualization and creation in consumer product design, which consequently prohibits creativity and innovation. In the past, several efforts have been made in order...doctoral thesis 2005
- document
-
Chu, A. (author), Wang, Z.B. (author), De Vriend, H.J. (author), Stive, M.J.F. (author)A process-based model for the Yangtze Estuary is constructed to study the sediment transport in the estuary. The proposed model covers the entire tidal region of the estuary, the Hangzhou Bay and a large part of the adjacent sea. The dominant processes, fluvial and tidal, are included in the model. The calibration of the model against extensive...conference paper 2010
- document
-
Wang, Z. (author), Krasnov, O.A. (author), Babur, G.P. (author), Ligthart, L.P. (author), Van der Zwan, F. (author)This paper presents the development of a reconfigurable receiver to undertake challenging signal processing tasks for a novel polarimetric radar system. The field-programmable gate arrays (FPGAs)-based digital receiver samples incoming signals at intermediate frequency (IF) and processes signals digitally instead of using conventional analog...journal article 2011
- document
-
Gan, S. (author), Wang, S. (author), Chen, Y. (author), Qu, S. (author), Zu, S. (author)Direct imaging of simultaneous-source (or blended) data, without the need of deblending, requires a precise subsurface velocity model. In this paper, we focus on the velocity analysis of simultaneous-source data using the normal moveout-based velocity picking approach.We demonstrate that it is possible to obtain a precise velocity model directly...journal article 2016
- document
-
Wang, F. (author), van Halem, D. (author), Liu, G. (author), Lekkerkerker, K. (author), van der Hoek, J.P. (author)H2O2 residuals from advanced oxidation processes (AOPs) may have critical impacts on the microbial ecology and performance of subsequent biological treatment processes, but little is known. The objective of this study was to evaluate how H2O2 residuals influence sand systems with an emphasis on dissolved organic carbon (DOC) removal, microbial...journal article 2017
- document
-
Wang, H. (author), Chen, Chuyi (author), Qu, B. (author), Li, Daqing (author)The participation of individuals in multi-layer networks allows for feedback between network layers, opening new possibilities to mitigate epidemic spreading. For instance, the spread of a biological disease such as Ebola in a physical contact network may trigger the propagation of the information related to this disease in a communication...journal article 2017
- document
-
Fast ℓ1-regularized space-Time adaptive processing using alternating direction method of multipliersQin, Lilong (author), Wu, Manqing (author), Wang, X. (author), Dong, Zhen (author)Motivated by the sparsity of filter coefficients in full-dimension space-Time adaptive processing (STAP) algorithms, this paper proposes a fast ℓ1-regularized STAP algorithm based on the alternating direction method of multipliers to accelerate the convergence and reduce the calculations. The proposed algorithm uses a splitting variable to...journal article 2017
- document
-
Noori, Nadia Saad (author), Wang, Y. (author), Comes, M. (author), Lukosch, H.K. (author)Simulation exercises as a training tool for enhancing preparedness for emergency response are widely adopted in disaster management. This paper addresses current scenario design processes, proposes an alternative approach for simulation exercises and introduces a conceptual design of an adaptive scenario generator. Our work is based on a...conference paper 2017
- document
-
Luan, Hualong (author), Ding, P (author), Wang, Zhengbing (author), Yang, S.L. (author), Lu, Jin You (author)Morphodynamics of world's river deltas are increasingly affected by human activities, which are of great ecological, economic and social implications. However, impacts of human interventions in deltaic regions are insufficiently<br/>understood, especially superimposed upon diminishing sediment supplies. This study uses the heavily interfered...journal article 2018
- document
-
Wang, Y. (author), Hulstijn, Joris (author), Tan, Y. (author)Nowadays, as international trade with cross-border logistics increases, the administrative burden of regulatory authorities has been dramatically raised. In order to reduce repetitive and redundant supervisory controls and promote automatic administration procedures, electronic data interchange (EDI) 1 and other forms of information sharing...conference paper 2018
- document
-
Managed aquifer recharge as a barrier for ozone-based advanced oxidation by-products: BrO3- and H2O2Wang, F. (author)Managed Aquifer Recharge (MAR) is a technology that relies on soil passage - after pond infiltration - for water treatment. MAR is a proven technology for the removal of pathogenic micro-organisms, turbidity and a selection of specific organic micro-pollutions (OMPs). Nevertheless, removal of the wide variety of OMPs found in surface waters...doctoral thesis 2018
- document
-
Zhang, Weizhao (author), Bostanabad, Ramin (author), Liang, Biao (author), Su, Xuming (author), Zeng, Danielle (author), Bessa, M.A. (author), Wang, Yanchao (author), Chen, Wei (author), Cao, Jian (author)Carbon fiber reinforced plastics (CFRPs) are attracting growing attention in industry because of their enhanced properties. Preforming of thermoset carbon fiber prepregs is one of the most common production techniques of CFRPs. To simulate preforming, several computational methods have been developed. Most of these methods, however, obtain...journal article 2019
- document
-
Wang, W. (author), Munro, D.P. (author), Wang, C.C. (author), van Keulen, A. (author), Wu, J. (author)The design of optimal structures and the planning of (additive manufacturing) fabrication sequences have been considered typically as two separate tasks that are performed consecutively. In the light of recent advances in robot-assisted (wire-arc) additive manufacturing which enable addition of material along curved surfaces, we present a...journal article 2019
- document
-
Wang, G. (author), Marradia, Chiara (author), Albayrak, A. (author), van der Cammen, T.J.M. (author)Co-designing with people with dementia (PwD) can uncover their needs and preferences, which have been often overlooked. It is difficult for PwD to understand designers and express themselves in a conventional co-design session. This study aims to evaluate the effects of involving PwD in design research on both PwD and the design process; to...review 2019
- document
-
Wei, Mingqiang (author), Tian, Yang (author), Pang, Wai-Man (author), Wang, C.C. (author), Pang, Ming-Yong (author), Wang, Jun (author), Qin, Jin (author), Heng, Pheng-Ann (author)Bas-relief is characterized by its unique presentation of intrinsic shape properties and/or detailed appearance using materials raised up in different degrees above a background. However, many bas-relief modeling methods could not manipulate scene details well. We propose a simple and effective solution for two kinds of bas-relief modeling (i...journal article 2019
- document
-
Wang, H. (author)Railway catenary is the main infrastructure that delivers electric power for train operation. It is a structure commonly constructed along the railway line with contact wires suspended above the track. One or multiple pantographs mounted on the roof of a moving train collects electric current from the catenary through the sliding contact with a...doctoral thesis 2019
- document
-
Wang, Y. (author), Storms, J.E.A. (author), Martinius, A.W. (author), Karssenberg, Derek (author), Abels, H.A. (author)Formation of alluvial stratigraphy is controlled by autogenic processes that mix their imprints with allogenic forcing. In some alluvial successions, sedimentary cycles have been linked to astronomically-driven, cyclic climate changes. However, it remains challenging to define how such cyclic allogenic forcing leads to sedimentary cycles when...journal article 2020
- document
-
Zhang, Zheming (author), Wang, Fang (author), Pang, Y. (author), Yan, Gaowei (author)The problem of misalignment of the original measurement model is caused by nonlinear, time-varying characteristic of the batch process. In this paper, a method based on geodesic flow kernel (GFK) for feature transfer is proposed. By mapping data into the manifold space, the feature transfer from source domain to target domain is implemented....conference paper 2020
- document
-
Zhan, X. (author), Li, Z. (author), Masuda, Naoki (author), Holme, Petter (author), Wang, H. (author)Link prediction can be used to extract missing information, identify spurious interactions as well as forecast network evolution. Network embedding is a methodology to assign coordinates to nodes in a low-dimensional vector space. By embedding nodes into vectors, the link prediction problem can be converted into a similarity comparison task....journal article 2020
- document
-
Wu, Juan (author), Bai, Min (author), Zhang, D. (author), Wang, Hang (author), Huang, Guangtan (author), Chen, Yangkang (author)Five-dimensional (5D) seismic data reconstruction becomes more appealing in recent years because it takes advantage of five physical dimensions of the seismic data and can reconstruct data with large gap. The low-rank approximation approach is one of the most effective methods for reconstructing 5D dataset. However, the main disadvantage of...journal article 2020