Influence of the slope angle on wave overtopping at rubble mound breakwaters

The objective of this research is to gather more information about a possible relation between the slope angle of a rubble mound breakwater and the wave overtopping at this breakwater. The following research question is covered in this thesis: What is the influence of the slope angle of rubble mound breakwaters on wave overtopping? To answer...

Wave overtopping layer thickness on the crest of rubble mound seawalls

During storms, ensuring the protection of people, vehicles and infrastructure on the crest of coastal structures from wave overtopping hazards is crucial. The thickness of the wave overtopping layer is a key variable used for assessing safety and maintaining a secure design. Traditionally, this parameter is associated with the height...

Numerical modelling of wave overtopping discharges at rubble mound breakwaters using OpenFOAM®

Numerical modelling of wave interaction with rock-armoured rubble mound breakwaters has been performed to study wave overtopping. The influences of the slope angle, a berm in the seaward slope, a protruding crest wall, a recurved parapet, and the wave steepness have been studied using a validated CFD model (OpenFOAM). The numerical modelling...

Experimental study of wave overtopping at rubble mound seawalls

Seawalls play a significant role in protecting coastal areas against wave attack and flooding. The accurate estimation of wave overtopping at seawalls is therefore crucial to adequately protect people and infrastructure in these regions. In this study, the mean wave overtopping rate at rubble mound seawalls was investigated through 140 small...

Wave overtopping discharges at rubble mound breakwaters including effects of a crest wall and a berm

Physical model tests have been performed to study wave overtopping at rubble mound breakwaters, including breakwaters with a crest wall, breakwaters with a berm, and breakwaters with a crest wall and a berm. For rubble mound structures with a protruding crest wall or with a stable berm, limited information is available in literature even...

Climate Adaptation of Rubble Mound Breakwaters: A study to the accuracy of overtopping formulas for combination of solutions

Rubble mound structures are often constructed to prevent severe wave damage to ships. By constructing the crest at a certain level, the waves are reduced such that safety is ensured. However, a large increase in sea level rise is expected in the next century due to climate change. Because of this, multiple adaptations might be necessary to meet...

An efficient numerical approach to model wave overtopping of rubble mound breakwaters

Worldwide, rubble mound breakwaters are designed and built to shelter and protect coastal areas from overtopping and flooding, especially harbours and shorelines. Rubble mound breakwaters are essential to preserve desired hydraulic conditions within the hinterland, avoiding damage to inhabited or industrial areas. This research focuses on the...

Tolerable wave overtopping during construction of a breakwater

Wave overtopping is an important aspect for the design of rubble mound breakwaters. Acceptable overtopping limits are usually based on the mean overtopping discharge or the maximum overtopping volume (EurOtop, 2018). For temporary situations, such as breakwaters under construction, overtopping limits are not clearly defined. This complicates the...