Experimental and numerical study on the mitigation of autogenous shrinkage of cementitious material

This study experimentally investigated the effects of surfactants and water-repelling agents on the hydration process, relative humidity, and mechanical properties of Portland cement pastes. Based on the measurement results, the degree of hydration, degree of saturation, capillary tension of autogenous shrinkage, and magnitude of autogenous...

Carbonation and related behaviors of hardened cement pastes under different hydration degrees

This paper develops a kind of molded disc samples to investigate the carbonation and related behaviors of hardened cement pastes under different previous hydration degrees. Weight and length changes of cement pastes over time are monitored during a multistep process including carbonation, drying, rewetting, and redrying. The combination of X...

Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?

Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....

Bayesian Inverse Modelling of Early-Age Stress Evolution in GGBFS Concrete Due to Autogenous Deformation and Aging Creep

Stress evolution of restrained concrete is directly related to early-age cracking (EAC) potential of concrete, which is a tricky problem that often happens in engineering practice. Due to the global objective of carbon reduction, Ground granulated blast furnace slag (GGBFS) concrete has become a more promising binder comparing with Ordinary...

Stress evolution in restrained GGBFS concrete due to autogenous deformation: bayesian optimization of aging creep

Stress evolution of restrained concrete is a significant direct index in early-age cracking (EAC) analysis of concrete. This study presents experiments and numerical modelling of the early-age stress evolution of Ground granulated blast furnace slag (GGBFS) concrete, considering the development of autogenous deformation and creep. Temperature...

The Influence of Autogenous Shrinkage and Creep on the Risk of Early Age Cracking

The study aims to investigate the mechanism of early-age cracks in different massive concrete structures (i.e. tunnels, bridge foundations and underground parking garages), with the objective of answering the following three specific questions: <br/><br/>1) How does the parameters of concrete proportion mix (e.g. w/c ratio, cementitious...

Effect of metakaolin on the autogenous shrinkage of alkali-activated slag-fly ash paste

The high autogenous shrinkage of alkali-activated materials made from slag and fly ash is recognised as a major drawback with regard to the use as construction materials. In this study, metakaolin was introduced into the alkali-activated slag-fly ash (AASF) paste to mitigate the autogenous shrinkage. The shrinkage mitigation mechanism of...

Cracking Potential of Alkali-Activated Concrete Induced by Autogenous Shrinkage

Alkali activated concrete (AAC) has not received broader industry acceptance, one reason of which lies in the uncertainties in the durability against shrinkage and potential cracking. Many studies reported that AAC exhibit larger autogenous shrinkage than OPC concrete. However, it is unable to deduce that AAC should show higher cracking...

Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes

This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the...

Cracking potential of alkali-activated slag and fly ash concrete subjected to restrained autogenous shrinkage

This study aims to investigate the cracking potential of alkali-activated slag (AAS) and alkali-activated slag-fly ash (AASF) concrete subjected to restrained autogenous shrinkage. Temperature Stress Testing Machine (TSTM) is utilized, for the first time, to monitor the stress evolution and to measure the cracking time of alkali-activated...

Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers

This study investigates the influences of internal curing on reducing the autogenous shrinkage of alkali-activated slag/fly ash (AASF) paste. The influences of internal curing with superabsorbent polymers (SAPs) on the reactions and microstructure of AASF paste are investigated. It is found that the SAPs absorb liquid mainly before the...