Searched for: subject%3A%22solid%22
(1 - 20 of 345)

Pages

document
Recalde Moreno Del Rocio, M.D.R. (author)
The global market for the wastewater treatment industry has been compelled to devise new concepts due to several factors. Currently, approximately 80% of untreated wastewater is discharged worldwide. The conventional technology for municipal solid waste treatment, which has been in use for over a century, is only partially effective in terms of...
doctoral thesis 2024
document
Amladi, Amogh (author), Venkataraman, V. (author), Woudstra, T. (author), Aravind, P.V. (author)
Energy storage is vital for the energy transition, enabling reliable power grids based on intermittent renewables. Reversible solid oxide cell (rSOC) technology is promising for seasonal energy storage. The novel finding from this work is that optimised air recirculation for rSOC in endothermic electrolyser mode leads to efficiency being...
journal article 2024
document
Wang, C. (author), Liu, M. (author), Bannenberg, L.J. (author), Zhao, C. (author), Thijs, M.A. (author), Boshuizen, B. (author), Ganapathy, S. (author), Wagemaker, M. (author)
Lithium metal with its high theoretical capacity and low negative potential is considered one of the most important candidates to raise the energy density of all-solid-state batteries. However, lithium filament growth and its induced solid electrolyte decomposition pose severe challenges to realize a long cycle life. Here, dendrite growth in...
journal article 2024
document
Graas, Adriaan B.M. (author), Wagner, E.C. (author), van Leeuwen, Tristan (author), van Ommen, J.R. (author), Batenburg, K. Joost (author), Lucka, Felix (author), Portela, L. (author)
A new X-ray computed tomography technique for the purpose of imaging fluidized beds is presented. It consists of an experimental set-up with three stationary X-ray source and flat panel detector pairs, a geometric calibration and data processing workflow, and an image reconstruction algorithm. The technique enables sparse-angular tomographic...
journal article 2024
document
Xie, Weihang (author), Deng, Zeyu (author), Liu, Zhengyu (author), Famprikis, T. (author), Butler, Keith T. (author), Canepa, Pieremanuele (author)
Extended defects, including exposed surfaces and grain boundaries (GBs), are critical to the properties of polycrystalline solid electrolytes in all-solid-state batteries (ASSBs). These defects can alter the mechanical and electronic properties of solid electrolytes, with direct manifestations in the performance of ASSBs. Here, by building a...
journal article 2024
document
Chen, B. (author), Ye, G. (author)
This research explored the microstructure formation and strength development of blended cement pastes prepared with municipal solid waste incineration (MSWI) bottom ash. A new sample preparation approach involving water treatment of MSWI bottom ash was developed to prevent sample cracking caused by the presence of metallic aluminum (Al) in...
journal article 2024
document
Pinto, D. (author), Minorello, S. (author), Zhou, Zhouping (author), Urakawa, A. (author)
Carbon dioxide capture and reduction (CCR) process emerges as an efficient catalytic strategy for CO<sub>2</sub> capture and conversion to valuable chemicals. K-promoted Cu/Al<sub>2</sub>O<sub>3</sub> catalysts exhibited promising CO<sub>2</sub> capture efficiency and highly selective conversion to syngas (CO + H<sub>2</sub>). The dynamic...
journal article 2024
document
Piaggio, A.L. (author), Smith, Geo (author), de Kreuk, M.K. (author), Lindeboom, R.E.F. (author)
Particle-bubble collisions in dissolved air flotation (DAF) systems play a crucial role in the removal of total suspended solids (TSS). DAF particle-bubble collision models incorporate factors such as particle diameters, charge and density, bubble diameters, and collision factors. The challenge lies in accounting for the wide range of...
journal article 2024
document
Chen, B. (author), Perumal, Priyadharshini (author), Aghabeyk, F. (author), Adediran, Adeolu (author), Illikainen, Mirja (author), Ye, G. (author)
The pursuit of low-carbon binders as alternatives to Portland cement has sparked interest in developing alkali-activated materials (AAM).<sup>1</sup> Using municipal solid waste incineration (MSWI) bottom ash as precursor for AAM has attracted increasing attention as it offers a sustainable, resource-efficient solution to mitigate the...
review 2024
document
Chen, B. (author), Chen, J. (author), França de Mendonça Filho, F. (author), Sun, Yubo (author), van Zijl, Marc Brito (author), Copuroglu, Oguzhan (author), Ye, G. (author)
Municipal solid waste incineration (MSWI) bottom ash, due to its high mineral content, presents great potential as supplementary cementitious material (SCM). Weathering, also known as aging, is a treatment process commonly employed in waste management to minimize the risk of heavy metal leaching from MSWI bottom ash. Using weathered MSWI...
journal article 2024
document
Leonetti, Leonardo (author), Verhelst, H.M. (author)
The present study aims to develop an original solid-like shell element for large deformation analysis of hyperelastic shell structures in the context of isogeometric analysis (IGA). The presented model includes a new variable to describe the thickness change of the shell and allows for the application of unmodified three-dimensional...
journal article 2024
document
Juárez Pastor, Lidia (author), Subramanian, Vrishali (author), Cucurachi, S. (author), Ghorbani, Amineh (author)
Solid waste management in low- and middle-income countries like India faces significant challenges due to the increasing waste generation that surpasses the current capacity. Therefore, the informal waste sector (IWS) is more vital than ever in handling consumer waste alongside municipal solid waste management (SWM) systems. However, the...
journal article 2024
document
Hu, D. (author), Wang, Chieh (author), Li, Z. (author), Gupta, N. (author), Poelma, René H. (author), Shi, Ziliang (author), Fan, J. (author), Zhang, Kouchi (author)
Driven by the increasing demand for high-power systems, ceramic substrates have received more attention for handling higher power density. Warpage in active metal brazed (AMB) ceramic substrate becomes a critical issue as it can deteriorate the reliability performance. This study comprises three phases, including investigation of the cause of...
conference paper 2024
document
Hu, X. (author), Huang, Jianlin (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Low-temperature sintering technology of Ag nanoparticles is widely used in high-power electronic device packaging. Utilizing simulation methods to comprehend and control the microstructure and properties of Ag sintering materials has emerged as a prominent research area. This work uses the General Form PDE module in COMSOL to simplify the...
conference paper 2024
document
Lee, Won Yong (author), Wen, C. (author), Pham, N.H. (author), Khaksaran, Mohammad Hadi (author), Lee, S. (author), Zhang, Shi Li (author)
Tracing fast nanopore-translocating analytes requires a high-frequency measurement system that warrants a temporal resolution better than 1 µs. This constraint may practically shift the challenge from increasing the sampling bandwidth to dealing with the rapidly growing noise with frequencies typically above 10 kHz, potentially making it...
journal article 2024
document
Klughammer, N. (author)
In this thesis, we have introduced palladium zero-mode waveguides (Pd ZMWs) as a valuable tool for biophysics research and have showcased several applications thereof. We started by using them as single-molecule sensors for free translocations of fluorophores, proteins, and voltage-driven translocations of DNA. By studying salt-gradient driven...
doctoral thesis 2023
document
Tosto, F. (author)
The vast majority of energy conversion systems currently makes use of fossil fuels, whose combustion generates harmful greenhouse gases. Transitioning to renewable energy sources is thus paramount to limiting the environmental impact of human activities on the climate. In this regard, the harvesting of wasted thermal energy constitutes a...
doctoral thesis 2023
document
van der Maas, E.L. (author)
Batteries are an important aspect of sustainable energy technologies, as they can be used either for the storage of electric energy for the grid or for the electrification of the transport fleet, making these sectors less reliant on fossil fuels (chapter 1). The Li-ion battery has revolutionized the world in many ways, enabling portable electric...
doctoral thesis 2023
document
Döpke, M.F. (author)
Experimentally investigating the nanoscale behavior at oxide-electrolyte interfaces has proven to be extremely challenging. Molecular Dynamics (MD) simulations have arisen as a potential computational alternative to gain atomic level insights at these interfaces. But how accurately do these simulations represent the physics and chemistry at the...
doctoral thesis 2023
document
Emmerink, J.V. (author), Hadi, A.H. (author), Jovanova, J. (author), Cleven, Chris (author), Schott, D.L. (author)
To improve the understanding of the mixing performance of double shaft, batch-type paddle mixers, the discrete element method (DEM) in combination with a Plackett–Burman design of experiments simulation plan is used to identify factor significance on the system’s mixing performance. Effects of several factors, including three material properties...
journal article 2023
Searched for: subject%3A%22solid%22
(1 - 20 of 345)

Pages