Naturally effective inhibition of microbial corrosion on carbon steel by beneficial biofilm in the South China Sea

Microbially influenced corrosion (MIC) of metals exerts a negative effect on the marine environment and causes a great loss of marine facilities. Corrosion prevention in an eco-friendly and sustainable way is a difficult problem to address, especially in the marine environment. In this work, Nocardiopsis dassonville, a corrosive bacteria...

焊接残余应力对钢桥面疲劳性能的影响与处理措施

In order to improve the fatigue resistance of orthotropic steel decks (OSDs), the steel bridge deck was annealed to reduce the welding residual stress of key welds. This work at first presented a systematical review and discussion over the distribution pattern of welding residual stress in OSDs, in accordance with a conceptual analysis...

Effects of GBFS content and curing methods on the working performance and microstructure of ternary geopolymers based on high-content steel slag

Aimed to address the low utilization rate of steel slag (SS) and its challenge in resource utilization in China, this study developed ternary geopolymers made by high-content (50%) SS together with fly ash (FA) and granulated blast furnace slag (GBFS). The effects of GBFS content (0–40%) and curing methods (water curing, standard curing,...

Impressed current cathodic protection of chloride-contaminated RC structures with cracking: A numerical study

Impressed current cathodic protection (ICCP) is an effective and direct method for controlling the corrosion of reinforced concrete (RC) structures. However, few investigations related to ICCP in cracked RC structures have been reported. In this study, the effect of cracks in concrete cover on ICCP of chloride-contaminated RC structures was...

Effect of Nb on Microstructural Evolution and Mechanical Properties of Hot-Rolled Quenching and Partitioning Steels Containing Bainite

Herein, the effect of Nb content on the phase transformation kinetics, microstructure, and mechanical properties of hot-rolled quenching and partitioning (Q&P) steel is investigated. The characteristics of three C–Mn–Si–Ti steels (0.18C, 2.0Si, 2.6Mn, and 0.015Ti) containing 0, 0.027, or 0.061 wt% Nb are compared. Results reveal that...

Combined effects of elevated temperatures and high strain rates on compressive performance of S30408 austenitic stainless steel

This paper presents an experimental investigation on the dynamic mechanical performance of S30408 austenitic stainless steel (ASS) under elevated temperatures, which is essential for determining the behaviour of structures made with this type of steel subjected to the coupled fire and impact/explosion. For this purpose, the quasi-static and...

Shear-slip behaviour of prefabricated composite shear stud connectors in composite bridges

This paper has investigated the shear-slip behaviour of an innovative prefabricated composite shear stud (PCSS) connector and its application in the prefabricated steel–concrete composite bridges. A series of push-out tests are carried out on a total of 12 specimens, including 6 PCSS specimens and 6 conventional shear stud (CSS) specimens....

Numerical investigation of the behavior of stone ballast mixed by steel slag in ballasted railway track

Recently, implementing steel slag ballast has been proposed as an appropriate material to substitute stone ballast. In this regard, one of the technical concerns is the behavior of steel slag ballast in both time and frequency domains that needs to be assessed, properly. Furthermore, the combination of stone ballast and steel slag is...

Flexural strength and rotation capacity of welded I-section steel beams with longitudinally profiled flanges

Application of longitudinally profiled (LP) steel plate in the flange of flexural members may provide a good solution to optimize their mechanical performance and to improve the efficiency of steel use, whilst existing design codes provide no design guidance or prediction methodology for such advanced beams in terms of flexural behaviour. To...

Delamination toughening in a low carbon microalloyed steel plate rolled in the dual-phase region

It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...

Experimental and numerical study on behaviour of square steel tube confined reinforced concrete stub columns after fire exposure

The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....

Laboratory and numerical investigation of microwave heating properties of asphalt mixture

Microwave heating is an encouraging heating technology for the maintenance, recycling, and deicing of asphalt pavement. To investigate the microwave heating properties of asphalt mixture, laboratory tests and numerical simulations were done and compared. Two types of Stone Mastic Asphalt (SMA) mixture samples (with basalt aggregates and steel...

Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

With the development of the materials genome philosophy and data mining methodologies, machine learning (ML) has been widely applied for discovering new materials in various systems including high-end steels with improved performance. Although recently, some attempts have been made to incorporate physical features in the ML process, its...

Shear capacity of a novel joint between corrugated steel web and concrete lower slab

Composite girder with corrugated steel web is one of the promising concrete-steel hybrid structures with superior properties and cost effectiveness widely applied in highway and railway bridges. The connection between concrete slabs and corrugated steel web is an important part of such composite structure. In order to improve pouring quality...

Committee III.2: Fatigue and Fracture

Concern for crack initiation and growth under cyclic loading as well as unstable crack propagation and tearing in the ship and offshore structures. Due attention shall be paid to the suitability and uncertainty of physical models and testing. Consideration is to be given to practical application, statistical description and fracture control...

A study on the steel corrosion protection of a microcapsule based self-healing cementitious system by means of electrochemical impedance spectroscopy

Based on microcapsule technology, a new type of self-healing system for cementitious composites is established. The performance of the system was characterized by means of electrochemical impedance spectroscopy of steel bars immersed in a simulated concrete environment. The results demonstrate strong inhibition of chloride-induced corrosion when...